Asterisk/Trixbox & Eyebeam Video Config

Comment on Asterisk phone xten eyeBeam
dbanks
Joined: Thu 06 of Mar, 2008

Asterisk/Trixbox & Eyebeam Video Config

Posted:Thu 06 of Mar, 2008 (17:11 UTC)
Good day, I tried several times to configure according to the instructions below but I could not get the video to transmit between the 2 test machines I setup.

1. In Sip Conf. and Sip Additional, I put the comment "video support =yes
2. The part that confuses me is the following string


[101]
type=friend
username=101
secret=hidden
host=dynamic
context=internal
callerid=Video Phone <101>
disallow=all ; better for custom-tunning codec selection
allow=ulaw
allow=alaw
allow=gsm
allow=h263 ; H.263 is our video codec
allow=h263p ; H.263p is the enhanced video codec
dtmfmode=rfc2833 ; inband is not supported in compressed codecs like gsm, so we better set it to rfc2833
canreinvite=no ; canreinvite must be set to 'no' 


Do I update the data for the extensions to look like this or do I add it once as (101) and that does the trick ? I appreciate all answers.