Flashing Cisco 7960 to SIP

brianhageman
Joined: Thu 27 of Aug, 2009

Re: Flashing Cisco 7960 to SIP

Posted:Fri 28 of Aug, 2009 (00:36 UTC)
I did a little more research and found that 7960's can't be flashed to 8-12 without getting flashed to 7-5 first, so I did that. Now, all the files load without any error but after loading all the files I get the error: "Protocol Application Invalid"

Tried factory reset. No luck. Any other suggestions?
brianhageman
Joined: Thu 27 of Aug, 2009

Flashing Cisco 7960 to SIP

Posted:Thu 27 of Aug, 2009 (23:59 UTC)
I did all the research, gathered all the files, and followed all the steps one-by-one but my Cisco 7960 will not complete the SIP flash procedure. I have double checked by files and all the config variables. All point to P003-8-12-00.

Read request for file <P003-8-12-00.loads>. Mode octet [27/08 16:53:01.281]
File <P003-8-12-00.loads> : error 2 in system call CreateFile The system cannot find the file specified. [27/08 16:53:01.281]


Then the phone goes into a constant reboot ending with "File Auth Error" and then eventually "TFTP Timeout"

Any suggestions?

Thanks in advance!!!