MFC/R2 signaling call placing problem using UniCall

kanand81
Joined: Tue 22 of Nov, 2005

MFC/R2 signaling call placing problem using UniCall

Posted:Thu 29 of Apr, 2010 (11:56 UTC)
Hi All,

Please help me. i m trying to configure Zap card with MFC/2R signaling in saudi arabia.
My zaptel.conf configuration is as ….

loadzone=uk
defaultzone=uk
span=1,1,0,cas,hdb3
span=2,1,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
cas=32-46:1101
cas=48-62:1101

unicall.conf is as …..

[channels]
language=en
usecallerid=yes
echocancel=yes
rxgain=0
txgain=0
group=1
callgroup=1
pickupgroup=1
amaflags=default
accountcode=avantel
musiconhold=default
context=test
loglevel=255
protocol
protocolvariant = sa,16,16,16,T1=1500,T2=24000,T3=15000,max-seize-wait-ack=3000
category=NATIONAL_SUBSCRIBER
channel=>1-15,17-31
channel=>32-46,48-62

when i m dialing the number then i m finding following log and calling not going.
— Executing [0504814107@test:1] Dial(“SIP/100-194429e0″, “UniCall/g1/0504814107″) in new stack
MFC/R2 UniCall/32 Call control(1)
MFC/R2 UniCall/32 Make call
MFC/R2 UniCall/32 Creating a new call with CRN 32773
MFC/R2 UniCall/32 0001 -> [1/DIALING /Seize /Idle ]
— Called g1/0504814107
[Apr 29 13:56:01] NOTICE[19374]: chan_unicall.c:2518 handle_uc_event: Unicall/32 event Dialing
[Apr 29 13:56:01] NOTICE[19374]: chan_unicall.c:1914 unicall_exception: Exception on 51, channel 32
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [2/DIALING /Group I /Category ]
MFC/R2 UniCall/32 [2/DIALING /Group I /Category ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /End of ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /End of ANI ]
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/32 [1/FAR DISC/Await answer /Idle ]
— Hungup ‘UniCall/32-1′
== Everyone is busy/congested at this time (1:0/1/0)
— Executing [0504814107@test:2] Hangup(“SIP/100-194429e0″, “”) in new stack
== Spawn extension (test, 0504814107, 2) exited non-zero on ‘SIP/100-194429e0′
MFC/R2 UniCall/32 <- 1001 [1/FAR DISC/Clear fwd D /Idle ]
MFC/R2 UniCall/32 Call disconnected (cause = User alerting, no answer [19]) – state 0×800
[Apr 29 13:57:03] NOTICE[19237]: chan_unicall.c:2518 handle_uc_event: Unicall/32 event Drop call
MFC/R2 UniCall/32 Call control(8)
MFC/R2 UniCall/32 Release call
MFC/R2 UniCall/32 Destroying call with CRN 32773
[Apr 29 13:57:03] NOTICE[19237]: chan_unicall.c:2518 handle_uc_event: Unicall/32 event Release call
— Unicall/32 released
MFC/R2 UniCall/32 Channel echo cancel


please tell me where i m doing wrong. are my configuration is ok or not.

Thanks in advanced.