Gnex:Manufacturer of GSM CDMA Wireless Terminal

gnextech
Joined: Thu 04 of Nov, 2010

Gnex:Manufacturer of GSM CDMA Wireless Terminal

Posted:Thu 04 of Nov, 2010 (14:18 UTC)
Gnex:Manufacturer of GSM CDMA Wireless Terminal
[img]http://www.gnex168.com/pic/big/71_0.jpg[/img]
Product name : Gsm Wireless Terminal 8 ports 32 Sim Cards 
Item : Gnex-I008 
Details :  
IMEI changing Automatically
Standard PSTN FXS with RJ-11
400-500Hz Dial-tone and Busy-tone , Disconnect Tone
50V in idle and 75V in ringing and 9-12V in talking
DTMF detector in RJ-11
Provide reverse polarity
Caller ID (DTMF,after ONE Ring)
One Number Unified(Optional) 
CLIR(Calling Line Identification Restriction)
Separate Power On/Off controller
LED indicating Hook On/Off,Talking,Signal Intensity,Power On/Off
Setable dialing delay time
Setable automatic dialing
Support to dial all number including of * # 
DTMF Automaticly dialing (Optional)
SPK & MIC volume regulate
Provide accumulator charger interface (Optional)
Multiparty Calling teleconference (Special Optional)
Setable Maxim talking time to warn of exchanger card (Special Optional)
4SIM Rotator Automaticly (Special Optional)
IMEI changing (Special Optional)
Rasio Bases Changing Automaticly to simulate movement (Special Optional)
Simple to install and easy to maintain
Steady module & reliable design ensures good performance
Strong signals with high gain antenna
No noise & Clear voice
for wide voltage range & Low power consumption
Suitable for all kinds of weather & environment
Offer keypad command sets to define functions
[img]http://www.gnex168.com/pic/big/73_0.jpg[/img]
[img]http://www.gnex168.com/pic/big/74_0.jpg[/img]
Product name : GSM Multi-Route Wireless Terminal( 4/8 Ports) 
Item : Gnex-004/008 
Details :  
Gnex-008 adopts cabinet structure, is suitable for multi-users. Every cabinet is made of 8 built-in users' board. Users can reduce or add the quantity of user's board from 1 to 8 for every cabinet flexibly.
Main function: 
Provide accurate anti-polarity signal
Incoming calls display: Offer the function of displaying incoming call. 
The connected telephon e must have the function of displaying incoming calls. 
Add prefixal code automatically: The telephone setting can be set up to add the local area code when dialing local fixed calls and add IP prefixal code when dialing long-distance calls. 
Locking wireless terminal, Locking SIM card, locking service provider and locking districts: All these functions can be set up according to the customers' requirement. Locking terminal means that the terminal only can identify the SIM card that is installed in the terminal when locking terminal is set up and the setting is effective . Locking SIM card means that the locked SIM card only can be used in the corresponding terminal in that locking SIM card is set and is effective . Locking service provider can forbid the SIM card that doesn't belong to the locked service provider to be used in the terminal. The number of locked districts can be the digits from 1 to 6.The terminal can search for districts around itself automatically if locking district is set up. Then the terminal only can be used in the locked districts. 
Network Management: The network management system can exchange data with wireless terminal through sending and receiving short message such as inquire parameters, modify the parameters, report malfunction and so on. Long-distance management is realized and needn't operator go to the scene to make maintenance. 
Parameter management: Parameters can be modified by the users by hand. Enter setting program by inputting correct passwords. After entering setting program, users can change parameters with the given orders. 
Telephone code management: Barred code, directly transmit code, local mobile telephone code and long-distance code can be set up conveniently. 
Fast transmit telephone numbers: According to the standard of the service provider, the dialed numbers will be transmitted 6s later since the last digit of the telephone numbers is pressed . Some customers think the waiting time of 6s is too long. In order to meet the users' requirement to shorten the waiting time, the function of fast transmitting telephone numbers is developed. The list of fast transmit telephone numbers can be set up. This setting will save 4 seconds waiting time for the users for dialing every fast transmit telephone numbers. 
Pay nothing for internal calls (optional) : The telephones that are connected to the same terminal can call each other without using the mobile telephone network and the users need not pay any things for this kind of call. The functions and use are the same to PBX. 
Resume parameters: All the parameters can be set up to be the default value which are set up when the terminal left the factory. 
Set up or cancel call diverting.
Adjusting the Volume of Voice : microphone volume and speaker volume can be adjusted separately.  
Technical Specifications
Environmental Temperature: -10℃ to +40℃     .Relative Humidity: 10% to 95%
Air Pressure: 86Kpa to 106Kpa                .Environmental Noise: ≤60dB(A)
Working Frequency: Automatically switch between GSM 900 and GSM1800MHz
Frequency Stability: Better than 2.5 PPM
Signal Sensitivity: -103dBM
Transmit Power: <2W
Power supply: AC 220V±15V 
[img]http://www.gnex168.com/pic/big/75_0.jpg[/img]
Product name : GSM Single-Route Wireless Terminal 
Item : Gnex-001 
Details :  
Main function: 
Provide accurate anti-polarity signal.
Incoming calls display: Offer the function of displaying incoming calls. The connected telephone must have the function of displaying incoming calls.
Add prefixal code automatically: The terminal setting can be set to add the local area code when dialing local fixed calls and add IP prefixal code when dialing long-distance calls. 
Locking wireless terminal, Locking SIM card, locking service provider and locking districts: All these functions can be set up according to the customers' requirement. Locking terminal means that the terminal only can identify the SIM card that is installed in the terminal when locking terminal is set up and the setting is effective . Locking SIM card means that the locked SIM card only can be used in the corresponding terminal in that locking SIM card is set and is effective . Locking service provider can forbid the SIM card that doesn't belong to the locked service provider to be used in the terminal. The number of locked districts can be the digits from 1 to 6.The terminal can search for districts around itself automatically if locking district is set up. Then the terminal only can be used in the locked districts. 
Network Management: The network management system can exchange data with wireless terminal through sending and receiving short message, such as inquire parameters, modify the parameters, report malfunction and so on. Long-distance management is realized and needn't operator go to the scene to make maintenance. 
Parameter management: Parameters can be modified by users by hand through the keyboard of the connected telephone. Enter setting program by inputting correct passwords. After entering setting program, users can change parameters with the given orders. 
Telephone numbers' code management: Barred code, directly transmit code, local mobile telephone code and long-distance code can be set up conveniently.
Fast transmit telephone numbers: According to the standard of the service provider, the dialed numbers will be transmitted 6s later since the last digit of the telephone numbers is pressed . Some customers think the waiting time of 6s is too long. In order to meet the users' requirement to shorten the waiting time, the function of fast transmit telephone numbers is developed. The list of fast transmit telephone numbers can be set up. This setting will save 4 seconds waiting time for the users for dialing every fast transmit telephone numbers. 
Pay nothing for internal calls (optional) : The telephones that are connected to the same terminal can call each other without using the mobile telephone network and the users need not pay any things for this kind of call. The functions and use are the same to PBX. 
Resume parameters: All the parameters can be set up to be the default value which are set up when the terminal left the factory. 
Set up or cancel call diverting 
Adjusting the Volume of Voice : microphone volume and speaker volume can be adjusted separately. 
Technical Specifications
Environmental Temperature: -10 to +40     .Relative Humidity: 10% to 95%
Air Pressure: 86Kpa to 106Kpa                .Environmental Noise: <60dB(A)
Working Frequency: Automatically switch between GSM 900 and GSM1800MHz
Frequency Stability: Better than 2.5 PPM
Signal Sensitivity: -103dBM
Transmit Power: <2W
Power supply: AC 220V±15V 

Gnex:Manufacturer of VOIP Phone,IP PBX,VOIP Gateway,GSM VOIP Gateway,GSM/E1 Gateway,GSM/CDMA Wireless Terminal,E1 Media Gateway.
Email:sales02@gnex168.com
Msn:gnexsales02@hotmail.com
SKype:gnexsales02
Tel :+86-755-86613285 
Fax:+86-755-86613062
Mobile:+(86)13501568781
Web: http://www.gnex168.com