Problem sending DTMF tones from FXS module.

dtrich0
Joined: Fri 16 of Dec, 2011

Re: Problem sending DTMF tones from FXS module.

Posted:Wed 11 of Jan, 2012 (12:52 UTC)
Finally, I have upgraded asterisk to 1.8 and the problem solved.
:-)
dtrich0
Joined: Fri 16 of Dec, 2011

Re: Problem sending DTMF tones from FXS module.

Posted:Fri 23 of Dec, 2011 (15:24 UTC)
The correct is dtmfmode=inband
Sorry for the mess :-(
dtrich0
Joined: Fri 16 of Dec, 2011

Re: Problem sending DTMF tones from FXS module.

Posted:Fri 23 of Dec, 2011 (15:21 UTC)
Thank you armorbear for your replay.
As I'm(me and asterisk server) in a LAN it is not so easy to give you ssh (I have to deal with IT department)
In the middle while I have found that post that describes the problem technically :

https://reviewboard.asterisk.org/r/625/

Can you guide me to configure the modedtmf=internal?
Thanks and wishes for the Christmas :-)
armorbear
Joined: Thu 15 of Dec, 2011

Re: Problem sending DTMF tones from FXS module.

Posted:Thu 22 of Dec, 2011 (21:17 UTC)
can you supply ssh to me , i will help you to check it
dtrich0
Joined: Fri 16 of Dec, 2011

Problem sending DTMF tones from FXS module.

Posted:Fri 16 of Dec, 2011 (18:40 UTC)
Hi,
I have a A400P card with two FXO and one FXS modules. I'm running Elastix and everything looks ok except that when I send DTMF tones from an analogue phone to FXS module the tones quality both in sip phones and the called PSTN phone number (Analogue Telephone->FXS ->Asterisk->FXO->PSTN->FarEnd PBX->IVR) is very bad and the remote IVR (DIGITAL RECEPTIONIST) makes wrong selection.
Any help please?
Thanks in advance,
Dimos