how to uae two pri lines..

striker
Joined: Tue 19 of Oct, 2010

Re: how to uae two pri lines..

Posted:Thu 16 of Feb, 2012 (04:09 UTC)
by grouping the channel you can useit

for eg:
Dahdi-channels.conf

Span 1
TE2/0/1 "T2XXP (PCI) Card 0 Span 1"

group=0,11 # group 0 for the channel 1-31

context=from-pstn ; incomming context for the pstn incomming calls

switchtype = euroisdn

signalling = pri_cpe

channel => 1-15,17-31

context = default

group = 63



Span 2
TE2/0/2 "T2XXP (PCI) Card 0 Span 2"

group=1,12 # group 1 for channel 32-62

context=from-epabx ; incomming context for the calls from the EPABX

switchtype = euroisdn

signalling = pri_net

channel => 32-46,48-62

context = default

group = 63

and in the trixbox create a new zap trunk and in the zap indentrifier put g1
then create a outgoing route and maping this trunk
so only g1 is used and g0 is used only for incomming
astavip
Joined: Tue 14 of Feb, 2012

how to uae two pri lines..

Posted:Tue 14 of Feb, 2012 (17:15 UTC)
hi friends..,
how to use two pri lines on single trixbox server one for incoming and one for outgoing????