DAHDI w/ Asterisk

ac3bf1
Joined: Thu 04 of Apr, 2013

DAHDI w/ Asterisk

Posted:Thu 04 of Apr, 2013 (09:06 UTC)
Hi All,

I have a Digium TDM400P card with 4 FXO modules installed.
There are two analogue lines connected on ports 1 and 2 (3 and 4 hence have no lines connected to them)

I have DAHDI working, recognizes the card and I used the following to check
dahdi_scan
dahdi_tool - total/conf/active 4/4/2
lsdahdi - and I get RED on channels 3 and 4 (where no lines are connected)

My system.conf file looks like this
##############
fxsks=1-4
loadzone	= it
defaultzone	= it
##############
my /etc/asterisk/chan_dahdi.conf looks like this
context=incoming
signalling = fxs_ks
channel => 2
#I have switched channel between 1, and 2 to test, but no luck (restarting both asterisk and dahdi every time)


in extensions.conf I have this section for testing (there is more in extensions.conf but not related to [incoming]


"square brakets" incoming "sqaure brakets"
exten => s,1,Answer()
   same => n,Echo()


I have also tried adding instead of the Echo()
;same => n,Playback(tt-weasels)
;same => n,Hangup()
but no luck

when opening asterisk's CLI (asterisk -vvvvvvvvvvr) I get nothing through there...
Any pointers on where I should look please? :-)

Thanks

J