I am new to the list (in editing mode). I have a problem with my asterisk setup.
Stetup in General:
Fritzbox -->[CAPIoverTCp]-->Asterisk (debian wheezy)-->SIP-Phones
Basic functionality is there (can make outbound calls, inbound call with specific extension, receive Fax on extension) The Problem i hav is that, i use DID (DirectInwardDial) and if i dial juts the telephone number without an extension, asterisk will not pickup the phone, (alyhough it recognizes the call).
Tried exten => s and alot more.
now if i dial my PSTN number without any extension, asterisk says the following:
== ISDN1#02: Incoming call '0664xxxxxxx' -> ''
== ISDN1#02: CAPI Hangingup for PLCI=0x1401 in state 1
with extension it works as it should be.
== ISDN1#02: Incoming call '0664xxxxxxx' -> '10'
-- Executing [10@capi-in:1] Dial("CAPI/ISDN1#02/10-3", "SIP/10") in new stack
== Using SIP RTP CoS mark 5
-- Called SIP/10
-- SIP/10-00000001 is ringing
== Spawn extension (capi-in, 10, 1) exited non-zero on 'CAPI/ISDN1#02/10-3'
== ISDN1#02: CAPI Hangingup for PLCI=0x1801 in state 1
> ISDN1#02: CAPI INFO 0x3490: Normal call clearing
Thanks for any help in advance