davparker
Joined: Sun 04 of Dec, 2005
Posted:Sun 04 of Dec, 2005 (23:45 UTC)
I setup a voipjet account almost 24 hours ago but cannot make long distance calls. I tried the config suggested here with no luck. I found a similar instructions on the voipjet web site but they indicated the trunk name should be username@voipjet. It includes this on the dial string. In any case neither config works for me. When I dial I get an audible message "all circuits are busy", the asterisk log indicates a REJECT with a CAUSE "No authority found". Email to fastsupport@voipjet have so far gone unanswered. The dial string seems to be correct

    -- Executing Dial("IAX2/300-6", "IAX2/6783@voipjet/18005551212") in new stack
    -- Called 6783@voipjet/18005551212
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX     Subclass: NEW
   Timestamp: 00012ms  SCall: 00007  DCall: 00000 [64.34.45.100:4569]
   VERSION         : 2
   CALLED NUMBER   : 18005551212
   CODEC_PREFS     : (ulaw|alaw|gsm)
   CALLING NUMBER  : 9796961234
   CALLING PRESNTN : 1
   CALLING TYPEOFN : 0
   CALLING TRANSIT : 0
   LANGUAGE        : en
   USERNAME        : 6783
   FORMAT          : 4
   CAPABILITY      : 63502
   ADSICPE         : 0
   DATE TIME       : 2005-12-04  17:20:06

Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX     Subclass: AUTHREQ
   Timestamp: 00019ms  SCall: 00034  DCall: 00007 [64.34.45.100:4569]
   AUTHMETHODS     : 3
   CHALLENGE       : 152344995
   USERNAME        : 6783

Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001 Type: IAX     Subclass: AUTHREP
   Timestamp: 00089ms  SCall: 00007  DCall: 00034 [64.34.45.100:4569]
   MD5 RESULT      : a88ef53b6a8e4ccc232974667ddda358

Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 002 Type: IAX     Subclass: ACK
   Timestamp: 00089ms  SCall: 00034  DCall: 00007 [64.34.45.100:4569]
Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 002 Type: IAX     Subclass: REJECT
   Timestamp: 01088ms  SCall: 00034  DCall: 00007 [64.34.45.100:4569]
   CAUSE           : No authority found