Infinite loop on incoming call

Comment on Asterisk@Home Handbook Wiki Chapter 4
LesBell
Joined: Tue 24 of Jan, 2006

Re: Infinite loop on incoming call

Posted:Thu 09 of Mar, 2006 (08:37 UTC)
I just went through this a few minutes ago - setting the destination for the "/" Incoming Route to "Use 'Incoming Calls" settings" resulted in a horrible loop that hangs up asterisk, with log entries similar to Juan's. Joseph's tip saved me hours of work. I can confirm that's the fix.

Thanks, Joe.
voipgeek
Joined: Tue 08 of Nov, 2005

Re: Infinite loop on incoming call

Posted:Tue 28 of Feb, 2006 (03:00 UTC)
I saw something very similar on outbound calls when under "Inbound routing" there was blank entry. This showed up as a "/" route in the right hand column on the "Inbound Routing" page. Once this was removed the loop was removed. Not sure it is exactly the same issue but may be a good place to start.

Hope this helps...

JJP
juanborras
Joined: Wed 23 of Nov, 2005

Infinite loop on incoming call

Posted:Thu 19 of Jan, 2006 (09:33 UTC)
Hi all, I've installed asterisk@home and works fine, but, when an incoming call is detected I get an infinite loop, part of the execution of tail -f
/var/log/asterisk/full follows:
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FROM_DID=s") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FAX_RX=disabled") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing Goto("Zap/1-1", "from-pstn|s|1") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Goto (from-pstn,s,1)
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FROM_DID=s") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FAX_RX=disabled") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing Goto("Zap/1-1", "from-pstn|s|1") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Goto (from-pstn,s,1)
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FROM_DID=s") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FAX_RX=disabled") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing Goto("Zap/1-1", "from-pstn|s|1") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Goto (from-pstn,s,1)
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FROM_DID=s") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FAX_RX=disabled") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing Goto("Zap/1-1", "from-pstn|s|1") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Goto (from-pstn,s,1)
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FROM_DID=s") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FAX_RX=disabled") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing Goto("Zap/1-1", "from-pstn|s|1") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Goto (from-pstn,s,1)
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FROM_DID=s") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FAX_RX=disabled") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing Goto("Zap/1-1", "from-pstn|s|1") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Goto (from-pstn,s,1)
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FROM_DID=s") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FAX_RX=disabled") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing Goto("Zap/1-1", "from-pstn|s|1") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Goto (from-pstn,s,1)
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FROM_DID=s") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FAX_RX=disabled") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing Goto("Zap/1-1", "from-pstn|s|1") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Goto (from-pstn,s,1)
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FROM_DID=s") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing SetVar("Zap/1-1", "FAX_RX=disabled") in new stack
Jan 19 04:25:18 VERBOSE[3961] logger.c:     -- Executing Goto("Zap/1-1", "from-pstn|s|1") in new stack

Any ideas??

Thanks a lot
Juan