I am attempting to configure a new Polycom IP 6000 to work with our SIP enabled Toshiba Strata Com Server. We currently only have Aastra 9133i's configured as such:


[+]

1. ---------------------------------------------------------------------

1. DHCP Setting
2. ============

1. Notes: To set a static IP address, you must first disable DHCP. If
2. DHCP is disabled, you will also need to manually configure Subnet
3. Mask, Gateway, DNS, and TFTP Server settings.

1. DHCP:
2. 0 = false, means DHCP is disabled.
3. 1 = true, means DHCP is enabled.

1. dhcp: 0 # DHCP disabled.

[+]

1. ---------------------------------------------------------------------

1. Network Settings
2. =============

1. ip: # This value is unique to each phone on a server

                    # and should be set in the "<mac>.cfg” file if 
                    # setting this manually.


[+]

1. ---------------------------------------------------------------------

1. Line Settings
2. =======

1. Lines should be set in the <mac>.cfg file since these settings
2. are unique to each phone.

1. Notes: Setting parameters for lines 1 - 4 configures the 4
2. line/call appearance hard keys on the 480i. Setting parameters
3. for lines 5 - 9 configures the phone for additional line/call
4. appearances that can be set up as softkeys.

1. The maximum number of line/call appearances that can be
2. configured on the 480i is 8 or 9, depending on how the lines
3. have been configured.

1. If all line/call appearances have been set up for the same
2. number, a total of 9 lines can be configured. If all line/call
3. appearances have been set up between two different numbers, a
4. total of 8 lines can be configured. This means that when all
5. line/call appearances are in use, 1 is connected while the rest
6. are held. No further outgoing or incoming calls can be made until
7. one of the line/call appearances becomes available.

1. Explanation of Settings with Line 1 as Example
2. ========================================

sip line1 auth name: stratacs # SIP Registrar request authorization name.
# This should match either TV User Account extension OR
# it should match Authorization Username set on the TV SIP Span

sip line1 password: stratacs # SIP Registrar request passcode.
# This should match either TV User Account password OR
# it should match Authorization Password set on the TV SIP Span

sip line1 user name: Ext213 # This parameter value is used by the 480i
                         # in the From header field of the outgoing
                         # SIP packet. 
                         # Match this with the 'userinfo' field in
                         # User Settings > Phone > External Station Settings 

sip line1 display name: Shipping Magnet # Name used for SIP messages. Typically the TV Account Name.

sip line1 screen name: Shipping Magnet # User's name seen on the idle screen of the
                         # user's phone.
                         

1. =================================
2. Settings for Lines 2-4 with TeleVantage
3. ====================================
4. Configure Lines 2 thru 4
5. with the same values that are set in
6. sip line1.
7. This is a required setting.
8. Remove current examples and uncomment lines.

sip line2 auth name: stratacs
sip line2 password: stratacs
sip line2 user name: Ext213
sip line2 display name: Shipping Magnet
sip line2 screen name: Shipping Magnet

sip line3 auth name: stratacs
sip line3 password: stratacs
sip line3 user name: Ext213
sip line3 display name: Shipping Magnet
sip line3 screen name: Shipping Magnet

sip line4 auth name: stratacs
sip line4 password: stratacs
sip line4 user name: Ext213
sip line4 display name: Shipping Magnet
sip line4 screen name: Shipping Magnet


I am working with stock polycom config files, but am not certain where changes need to be made. Any help would be appreciated.