GP-710 is a revolution and innovation product.
It Integrated VoIP and 2.4G Bluetooth technical in a device,
this not only offered high cost-effectiveness in mobile communication for mobile user,
but also offered very flexibility in re-building system.



Feature
1.Could use with GSM/CDMA/WCDMA/3G/3.5G
  various Bluetooth mobile phone.
2.VoIP and Bluetooth Mobile fully integration.
3. Compatible with SIP RFC543, RFC3261.
4. Support UPLINK , DOWNLINK Routining.
5. Support Voice report and Setting IP function
6. Offered Web Site for inquire or setting.
7. Support SIP PROXY, or point to point application.
8.Offered one stage ,two stage free dialing and call transfer function.
9.Bluetooth with auto pairing and auto searching function.
10.QoS and Digital Transmit.

Gempro Technology In.c
email: service@gempro.com.tw
webs: http://www.gempro.com.tw

---

GP-510 Fixed Wireless Bluetooth Mobile Terminal for GSM/WCDMA/CDMA (NOKIA MOTOROLA ...)
Model number: GP-510

GP-510 uses Bluetooth to connect Bluetooth mobile phone with common telephone or PBX.It makes immediately PBX has a trunk by mobile phone to transmit.It is not only far away the electromagnetic wave, but also unnecessary to change user’s habit of using the table phone. It is a trunk of mobile to mobile, and it also saves expenses.




Feature:


PBX/phone Bluetooth Mobile Voice is transmitted on the trunk by mobile phone.
GP-510 pairs to Bluetooth mobile phone to use directly, it doesn’t relate to telecommunication provider and frequency.
Just use phone to dial, it can be far away the electromagnetic wave.
Speed Dial Function.
The calling will pass to PSTN automatically when power down, mobile phone is unpaired or out of range.
Volume of digitization and it adjusts volume and gains.
Set local code and automatically add code, and user isn’t necessary to change habit of using the table phone.
Voice Call out Function(subject to mobile phone support).
Bluetooth has functions of pairing and searching automatically.
Transmit high quality voice.
It is compatible with GSM/CDMA/3G/3.5G Bluetooth mobile phone.



Application Diagram:







Specification:
Metering Signals: 12KHz, 16KHz,Polarity Reversal,Tone
A/D ,D/A : G.711:PCM Mode
DTMF : Detect & Generator
Caller ID Format: DTMF
Tone Programmable: Dial Tone & Busy Tone
Power : AC110/220V 50/60HZ


Bluetooth:
Bluetooth Specification V2.
Carrier Frequency 2400MHz to 2483.5MHz( USA , Spain ,France)
Modulation Method GFSK,1Mbps,0.5BT Gaussian
Output level, class 2
10 meters working range



Gempro Technology Inc.
email: service@gempro.com.tw
webs: http://www.gempro.com.tw