login | register
Wed 03 of Dec, 2008 [03:04 UTC]

voip-info.org

History

VOIP Routers

Created by: jht2,Last modification on Thu 22 of May, 2008 [16:38 UTC] by linkx
There are hundreds of different models of routers available, this is list of routers that may be of interest to VOIP users.

Small Routers with Multiple WAN Interfaces

Having multiple connections to the Internet from different providers can be a challenging configuration puzzle. Some routers are designed to make this easy for simple installations.
  • DrayTek multi-WAN routers have special VOIP prioritization features to insure voice goes out first.
  • Linksys RV082 10/100 8-Port VPN Router with 2 WAN interfaces
  • Astrocom Powerlink Pro - multiple WAN interfaces with load balancing and automatic failover

Small Routers with QOS and built-in VOIP ports

  • Allwin Tech G220: 1 WAN 4LAN, 2 FXS with PSTN backup, QoS, NAT, Router, WLAN optional
  • Atcom : * ag-268ADSL/ethernet/IPSec/Vlan 1 wan 1 lan, 2 fxs
  • AVM FritzBoxFon 1 ADSL 1 FXO or ISDN BRI 1 LAN 1 USB 2 FXS
    • Some models with 4 LAN ports
    • Some models with 3 FXS ports
    • Some models with USB host interface
    • Some models without ADSL2+ modem
  • BATM/Telco Systems AC-211: 2 FXS, 1 Ethernet WAN, 1 LAN, NAT Router, 1 PSTN.
    • Advanced Traffic Shapping for Voice Prioritization and QoS
    • T.38 Fax, VLAN, VPN supports, ...
    • Supports H.323, SIP and MGCP
    • Interroperability with most softswitch vendors
  • Bewan 820VG
    • http://www.bewan.com/bewan/products/routers/bw820vg.php
    • 1 FXS VoIP port for telephone (wired or DECT)
    • 1 FXO port for telephone line
    • Supports SIP, RTP/RTCP protocols
    • Built-in SPI Firewall
    • models with integrated WiFi accesspoint (IEEE802.11g/b)
    • ADSL2/2+ and NAT, port forward etc
      • Looks like a rebranded Draytek Router
  • Bewan LanBooster 6104 Vx
  • Cisco 827-4V ADSL/ethernet/4 FXS, T.38 Fax Relay
  • D-link DVG-1120 2 FXS and one FXO port
  • Draytek Vigor 2700VG
    • SIP, RTP/RTCP protocols compliance
    • 2 FXS ports supporting up to 6 SIP registrars
    • 1 PSTN Fail-over port
    • QoS: Guaranteed bandwidth for VoIP
    • Integrated IEEE802.11g/b WLAN AP
    • Built-in SPI Firewall and up to 2 IPSec/PPTP/L2TP VPN tunnels
  • DrayTek Vigor 2910VG
    • Dual-wan with fail-over/load-balance
    • SIP, RTP/RTCP protocols compliance
    • 2 FXS ports supporting up to 6 SIP registrars
    • Integrated IEEE802.11g/b WLAN AP
    • 3G USB Modem Support
    • QoS: Guaranteed bandwidth for VoIP
    • Built-in SPI Firewall and up to 32 IPSec/PPTP/L2TP VPN tunnels
    • Websense/SurfControl
  • Grand Digital Information Ltd. GVR111 VoIP Router with 1WAN+4LAN+1FXS+1FXO
  • Grandstream Handytone-486 1 FXS and one fall-back FXO port
  • Grandstream HT-488 2 Ethernet Ports, 1 FXS Port, 1 FXO port and PSTN Pass-through
  • HouTel 2 FXS ports and 1 FXS port, 1 FXO port and Life Line port.
  • Intertex SurfinBird IX67 1-2 FXS and 1 FXO port
  • Linksys RT31P2 Broadband Router - 2 FXS ports
  • NetFabric 2 to 24 ports
  • Ovislink VoIP Gateway Routers 1 to 4 FXS or FXO ports
  • PLANET: - IP Telephony - Deliver Your Voice in Real Time
    • Wi-Fi DECT VoIP Router
    • 2~24-Port VoIP Gateway Router
  • POLYPOWER VRC0 series
    • 2 FXS + 1 FXO (Life line)
    • 1 WAN port /1 or 4 LAN port
    • Router
    • T.38 FAX support
    • QoS support
  • POLYPOWER VoIP ADSL Router
    • ADSL over POTS or ISDN
    • 1 or 4 Etnernet port
    • 1 FXS Port for VoIP application
  • SpeedTouch 716 Residential DSL Gateway with Voice
    • ADSL 1/2/2+ modem with NAT router/firewall and 4 port switch
    • 2 FXS and 1 FXO ports
    • 716 and 716WL (wireless version)
  • Sipura SPA-2100
    • Router
    • 2 FXS ports
    • T.38 FAX support
    • QoS support
  • Uniden DTA 200
    • NAT router and Firewall
    • FAX support
    • 2 FXS ports
  • WorldACCXX
    • 2 Port FXS
    • QOS
    • HTTP & TFTP Provisioning
    • Fax Capable
  • XoIP Voi-PAL Traveller
    • http://www.xoip-group.com
    • 1 FXS with PSTN bypass VoIP Router
    • 1 x FXS with PSTN bypass when gatekeeper failure or network failure
    • DSL and NAT, port forward etc
  • Zoom V3
    • NAT router and Firewall
    • 1 FXS port,
    • 1 FXO for powerfail and 911
  • Zoom 58xx
    • FXO and FXS ports in a variety of combinations up to 4 FXS, 2FXO ports
    • Remote gateway "teleport" feature

Small NAT Routers with SIP Proxy


See Also:



Do-it-yourself Linux or BSD Routers with QOS

  • Mesh Router Linux Distribution
    • wired and wireless support
  • Monowall (FreeBSD)
    • just boot and run
    • web based configuration
    • includes real-time traffic graphing
    • magic shaper wizard aids in setting up traffic shaper rules
    • configs stored in convenient XML format
    • PC version runs on slow old PC with dual NICs. Boots from CD and stored setups on floppy. No HD required.
    • Embedded versions run on Soekris Engineering and PCEngines small format boards. Boot from and store setups to CF card.
    • includes VPN server and client capability.
    • may be configured as router & wifi access point.
    • can enforce VPN over wifi
  • pfSense (FreeBSD)
    • fork of M0n0wall
    • pfSense has very nice QoS for VoIP and traffic shaping, different from m0n0wall.
    • embedded version runs also on generic PC hardware, but unlike m0n0wall the output is directed to the serial port in this case. Therefore, for the embedded version you need a null-modem cable to connect from the serial port of your PC to the serial port of the router. Under Windows XP you can use HyperTerminal with settings for the serial connection of 9600 bits per second, 8 data bits, no parity, 1 stop bit and flow control set to hardware to see the output when the router boots. On linux you can use minicom as your terminal emulator.
  • IPcop
    • Web based configuration
    • Traffic shaping
    • Intrusion detection
    • VPN
    • etc.
  • Linux Router: How to build a powerful low-cost router using linux
  • AstLinux: A small Linux distro that includes traffic shaping, IPSEC, etc. and Asterisk.
    • IPSEC
    • IPv6
    • QoS + WonderShaper
    • It includes Asterisk and Zaptel, all around the 2.6 Linux kernel
  • Endian Firewall - linux security distribution initially based on IpCop that creates a full featured security appliance
    • GPL
    • Traffic Shaping / QoS
    • AntiSPAM
    • AntiVirus
    • SIP VoIP Proxy
    • Web based configuration
    • VPN
    • etc.
  • ZeroShell - A live CD and CompactFlash router for embedded devices with web interface
    • QoS and traffic shaping capabilities
    • QoS classifier that using Layer 7 filters allows to classify VoIP protocols such as SIP, H323, Skype and MSN Messenger
    • VPN Lan tp Lan and Host to Lan
    • Captive Portal
    • DNS
    • DHCP
    • Bridge and VLAN
    • etc.

Bandwidth Shapers

StreamEngine-based product

StreamEngine is a technology by Ubicom, that is incorporated in other vendor's network devices. Lets you prioritize your WAN's outbound traffic based on a proprietary protocol. Few adjustements are needed/possible.

Other technologies


See Also


Comments

Comments Filter
222

333VPN for VoIP Blocking

by jenniferhan, Wednesday 12 of December, 2007 [03:08:20 UTC]
Somebody use VPN to solve the VoIP Blocking issue. But it seems not a good way to solve the voip blocking issue. Because VPN will take more bandwidth and will take effection on the Voice Quality

Currently I am using the VGCP, a new solution to solve the VoIP Blocking issue. Following is theirs website:
http://www.speed-voip.com/index-36.html

If any of you have interested, you may try to use it to solve your VoIP Blocking problems. Thanks.

Andy
andywong-01@hotmail.com

222

333Re: BT Voyager 220V - Anyone know how to configure it?

by kaacper, Saturday 22 of September, 2007 [09:34:15 UTC]
The firmware download link mentioned by jason does not work. However, the following website dedicated to the router contains good hacked firmware downolads:

http://www-jcsu.jesus.cam.ac.uk/~acw43/projects/voyager

Unfortunately, the author does not discuss the VoIP features of the router at all.
222

333

by kaacper, Saturday 22 of September, 2007 [09:32:13 UTC]
222

333quality and cost advantage product

by mabel82222, Friday 07 of September, 2007 [09:05:37 UTC]
CentNet, which is the largest VoIP devices manufacturer in China. We are expert at cooperation with ITSP, solution provides and the agent all over the world. Our strong point products:
CNG100 series, CNG300 series, CNG800 series, CNG8000 series, 1-16ports gateways and trunk gateway. IP PBX X5 PLUS, Softswitch!

Firstly, let me briefly introduce our company: CentNet is established in 1999. We made the first VoIP Gateway in China and have gained the No. 1 possition VoIP equipment market in China for several years. With the biggest R&D team, we have leaded the market for 6 years, and has more than 47.3% market share here.
Contact Information:
Mabel Chang
MSN: mabel_centnet@hotmail.com
Email: zhanghong@centnet.com.cn

222

333Re: BT Voyager 220V - how to configure for Asterisk/SIP Provider

by rikard, Monday 23 of April, 2007 [14:34:12 UTC]
I've only been able to find a bit of info about the BT Voyager 220V on the net so in the end had to experiment myself. After a load of tedium I got it to work fine and now have two internal extensions connected to Asterisk via the 220. Here is how I did it. No knowledge is assumed so I've tried to include everything:-

1. As stated everywhere the web interface is no use for this. Telnet into the router. Windows has a basic Telnet built in so just type TELNET 192.168.xxx.xxx where xxx.xxx is the actual IP address of your router. For most people this will be the default IP it comes with. User/Password are the same as the web GUI.
2. You should see a numbered menu but you can ignore that. It's not obvious but you are actually at a linux command line now and the menu just serves as a prompt so you can type commands directly here.
3. Type the following commands carefully and make sure that you have returned to the menu each time as you will get press return to continue type prompts after everything you type.

voice set interface br0 - this changes the interface to use from the external internet link to the internal network
voice set registrar XXX.XXX.XXX.XXX:PPPP - where XXX.. is the IP address of your Asterisk box and PPPP is the port
voice set obproxy XXX.XXX.XXX.XXX:PPPP - as above, your Asterisk box
voice set proxy XXX.XXX.XXX.XXX:PPPP - as above again.
voice set phone1 num:callername:UserName:passwd
voice set phone2 num:callername:UserName:passwd
- num=the section name you have used in the Asterisk sip.conf file
- callername=Asterisk 'callerid' setting
- Username=Asterisk 'username' setting
- passwd=Asterisk 'passwd' setting !! :)
hint - type voice show for a full list of commands available

4. Select option 12 from the menu 'Save and Reboot' and then option 1 to confirm or you have just wasted your time!!
5. In sip.conf in Asterisk I used:

240
; BT Voyager 220V Extension 1
type=friend
regexten=240
username=240
authname=240
callerid=240
PLUS the other usual settings for a SIP extension.

Your router *should* now be setup to use Asterisk. If you have already setup Asterisk then after the reboot you should see the voyager register it's phones.

It's been running fine for a week now but you sometimes need to issue the command 'voice restart' via telnet to the router when you've made changes to Asterisk.

I'm an Asterisk fan but I reckon this method *should* work for any sip service provider. You'll need to leave the interface set to the internet for external SIP providers of course.
Bear in mind that this will disconnect your BT Broadband Voice line as you can only have one VoIP supplier. BT's answer to most problems with BT BBV is to send out a new router so there must be hundreds of redundant ones out there. If you have one use it for the FX ports so you have real phones for your SIP accounts.

This is my first post here so any feedback would be most appreciated especially on if this works with the Home Hub or other voyager type BT kit.
If anyone has problems getting this to work it would be good to know so I can keep this info updated
NOTE: I am still battling to get my Asterisk to use BT Broadband Voice - anyone achieved this and got some info on it?
222

333Jason

by koalauk, Tuesday 09 of May, 2006 [23:16:58 UTC]
Hi did the firmware update telnet to router, used the voice set commands, but whatever I have tried I cant get the voice set obproxy to register after saving the config if I do voice show, sip outbound proxy line is still empty and if I try to restart the voice application on the router its coming up with SIP outbound proxy server is not configure!!

what would be the problem??
222

333Re: BT Voyager 220V - Anyone know how to configure it?

by g60racing, Tuesday 04 of April, 2006 [09:55:10 UTC]
You need to upgrade the firmware to SIP protocal with here;

http://www.voyager.bt.com/firmware_upgrades/cfe-voyager220v_sip_btr-v301n_a2pb018c1

You cannot configure the SIP details via the web UI as its locked to BT(ish).

But if you telnet in "telnet 192.168.1.1" you can set all the SIP options with the "voice" command.

Cheers

Jason
222

333BT Voyager 220V - Anyone know how to configure it?

by BJ_Abbott, Tuesday 11 of October, 2005 [10:57:16 UTC]
This is a VOIP enabled modem/router supplied by BT. The BT Business Broadband Voice web-site has a high level user manual etc. but there is virtually no information about configuring this unit for other SIP providers. I gues BT don't want to tell anybody!! I don't think that it is locked. Does anyone have any further info on this unit, or details of its manufacturer. There are plenty for sale inexpensively on e-bay, perhaps because many swap it out for a wireless gateway. Would be good to have real gen on this item on this site.
222

333WorldACCXX TA-200

by mdyman, Monday 06 of December, 2004 [19:29:02 UTC]
This is a great telephone adaptor with integrated router for SOHO or residential VOIP. www.worldaccxx.com