Sangoma

logo.gif


Connect with Sangoma

Sangoma is a leading provider of hardware and software components that enable or enhance IP Communications Systems for both telecom and datacom applications. The product line includes data and telecom boards for media and signal processing as well as gateway appliances and software.

Compatible with Asterisk, Freeswitch, CallWeaver, Yate, 3CX, pbxnsip and others.

VoIP Gateways

Session Border Controllers

Microsoft® Lync™ Solutions

Multiplexers

Transcoding Boards (300–400 or 400–2,000 Sessions)

NetBorder™ Suite for Contact Centers

ISDN BRI Boards
  • A500 and B500 up to 24 ports of BRI PCIe or PCIx card, hardware echo cancellation optional

Digital Analog Hybrid Boards

ISDN PRI (T1/E1) Voice and Data Networking Boards
  • A101 one port T1/E1 PCIx card
  • A101E one port T1/E1 PCI Express card
  • A101D one port T1/E1 with Octasic hardware echo canceller PCIx card
  • A101DE one port T1/E1 PCI Express card with Octasic hardware echo canceller

  • A102 two port T1/E1 PCIx card
  • A102E two port T1/E1 PCI Express card
  • A102D two port T1/E1 with Octasic hardware echo canceller PCIx card
  • A102DE two port T1/E1 PCI Express card with Octasic hardware echo canceller

  • A104 four port T1/E1 PCIx
  • A104E four port T1/E1 PCI Express card
  • A104D four port T1/E1 PCIx with Octasic hardware echo canceller — see below for config tip
  • A104DE four port T1/E1 PCI Express card with Octasic hardware echo canceller — see below for config tip

  • A108 Eight Port T1/E1 card PCIx
  • A108E Eight Port T1/E1 card PCI Express
  • A108D Eight Port T1/E1 card PCIx with Octasic hardware echo canceller
  • A108DE Eight Port T1/E1 card PCI Express card with Octasic hardware echo canceller

Analog Voice Boards
  • A200/A200D 2 to 24 analog ports of FXO and or FXS with optional Octasic 128ms telco grade hardware echo canceller. PCI and PCIe Versions available.
  • A400/A400D higher density FXO/FXS to 24 ports with Octasic hardware echo canceller. PCI and PCIe Versions available.
  • B600 Non Modular Analog 4-Port FXO, 1-Port FXS. PCI Version
  • B600D Non Modular Analog 4-Port FXO, 1-Port FXS. PCI Version with Telco-Grade DSP Echo Canceller.
  • B600E Non Modular Analog 4-Port FXO, 1-Port FXS. PCIe Version
  • B600DE Non Modular Analog 4-Port FXO, 1-Port FXS. PCIe Version with Telco-Grade DSP Echo Canceller.
  • U100 2 Port FXO in USB
  • B700 FlexBRI hybrid card: 4 BRI ports and 2 FXS/FXO analog ports with Octasic HWEC

Resources



Configuration HOWTO
Sangoma B700 FlexBRI installation (German)

There are no known compatibility issues (IRQ, IO etc) with ANY Sangoma hardware and ANY make/brand of PC/server- NONE


Where to Buy


Become an Empowered by Sangoma Authorized Channel Partner.
For other countries check and a partial list of Authorized Empowered by Sangoma dealers, visit: http://www.sangoma.com/partner-finder/.



03 Jun 2006 : But at least A200 cards are unable to handle fax properly. Be warned !

12 Jun 2006 : It looks like the fax issue is more or less general to all the products...

9 July 2006 : I use an A101 and have it working fine with incoming/outgoing faxes, and via TE400 with modems (dualarrow)

11 July 2006 : I have both A200 and A104d cards and can't get faxing to work (even when only bridging calls). Spoke with tech support and they recognize the problem and claim to be working on a solution. I asked when new drivers would be available and got a very unconvincing 'Hopefully by the end of this week.' I know these cards are supposed to be great but when you pay $2000+ for a telephony card you'd expect faxing, a most basic feature, to be working.
--

Sangoma A-series cards have an international lifetime warranty.

The Sangoma cards work with their own drivers with zaptel loaded on top so asterisk sees them as native ZAP devices. All cards are software selectable T1/E1/J1 and support a lot of other protocols like X.25, Frame Relay ... besides the usual voice stuff required for asterisk.

For the latest drivers check:
ftp://ftp.sangoma.com/linux/current_wanpipe for Linux

Sangoma Driver Support and Assistance Wiki/Tips
NOTE: the wiki is fairly informative, but it looks like the documentation sometimes has trouble keeping up with the pace of development. For example, recently echo cancellation on the A104d was enabled via the Zaptel interface; which means that Zaptel dynamically informs the A104d when a given channel needs echo cancellation. This is implemented by way of having "echocancel = yes" in your zapata.conf file — in direct contradiction to the README.asterisk file currently included with the source. In addition, even in the wiki it fails to mention that the "echocancel = yes" line needs to precede the "channels" line for which it's intended. Don't let these small issues in any way let you think the card is less than top-notch; even on the most echo-prone lines, all is now clear. I'll never go back to doing an * install without EC.

Here is the voip-info page for the A200 Cards

Mixing voice and data on an Asterisk system works very well when utilizing a Sangoma card and the Sangoma WANPIPE driver.

User recommendations - recommendations based on real-world installations

Quad T1 card performance testing - Digium vs. Sangoma
Created by: jht2, Last modification: Fri 24 of Oct, 2014 (13:50 UTC) by bruckmann


Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+
 

Featured -

Search: