Discussion: ST2030 non-working features

I have a problem with the volume in before (in before) only called the external one
The volume is set up to the maximum, but when the line ring, the volume is a lot low
If it comes pressed 1 the volume turns the key vol+ goes to the corrected maximum set
This happens for every single bound together line entering to keys BLF
After to only have pressed (while the line ring) the key volume, in the successive entering calls, the volume remains ok
The volume goes ok also when it is made ring for before turns the inside

Hm, I think this is solved now, the provisioning system played tricks on me..

Francesco,

What softswitch are you using?

Thomson is not planning to stop MGCP support.
But as the FW is tightly linked to the SoftSwitch you need to upload the right FW.

Stéphane

I can't disable call-waiting from a config file. According to the docs it should be:

[customer]
sw_call_wait=0

but the phone gives me a syntax error.

Using MGCP v.1.18:

- no codec setting
- no CA registration
- no endpoint name setting

Did Thomson decided to shut down the MGCP support? SIP is complete and quite good working (using the correct settings).

Any idea?