ACT P104SLD IP Phone

ACT IP Phone P104SLD


Image

Features

  • Protocol: SIP (RFC 3261), optional support for H.323 and MGCP available upon request
  • interface: 1 Ethernet (WAN) & 1 Ethernet (PC), both 10/100baseT
  • LCD: 2 lines x 16 letters (alphanumeric matrix display)
  • Codecs: G.711 A-Law/u-Law, G.729A/B, G.723.1
  • Voice Quality: VAD, CNG, AEC (G.168),
  • Easy configuration by Web browser (IE, Konqueror, Mozilla, Safari) sample screenshot
  • Multi-user registration (4 user profiles)
  • Multi-line (10 line buttons)
  • Auto firmware upgrade (TFTP)
  • 3-way conference
  • Speed Dial (10 entries)
  • Phone Book (200 entries)
  • IP address: Static IP/PPPoE/DHCP
  • NAT traversal: UPnP and STUN
  • Handset/Speaker phone
  • DTMF modes: inband, out of band (RFC2833), SIP Info
  • Voice Mail with message waiting indicator
  • Call Waiting with audible and visual indicator
  • Call Forward (Busy, No answer, Unconditional)
  • Call Transfer (Unattended/Blind, Attended)
  • Call Park, Call Pick-up
  • Do Not Disturb (DND)
  • QoS: IEEE802.1p/q
  • Anonymous call block, Caller ID
  • Jitter buffer auto adjustment
  • Indication tones for China, France, Germany, Italy, Japan, Korea, Singapore, Spain, Turkey, Taiwan, UK, USA

Outstanding issues, ackhnowledged by manufacturer and being dealt with

  • message button doesn't dial voicemail, but is only intended to show the number of messages waiting
  • cancel button doesn't back out of the menu, instead you have to press OK or lift the handset
  • call waiting indicator tone is too loud and the pitch is too high - too intimidating
  • spaces in phone numbers in the phone book are not trimmed before dialling
  • UK tones setting doesn't sound UK at all, more like German indication tones
  • Japanese tones setting sounds alien, never heard anything like it before ;-)

Asterisk support

This phone works well with Asterisk and the manufacturer is committed to work on their firmware to ensure Asterisk interoperability.

sample entry in /etc/asterisk/sip.conf
[2000]
type=friend
auth=md5
secret=blah
qualify=yes
disallow=all
allow=ulaw
allow=alaw
allow=g729
dtmfmode=info
mailbox=2000

Manufacturer


Where to buy



Back to VoIP Phones

ACT IP Phone P104SLD


Image

Features

  • Protocol: SIP (RFC 3261), optional support for H.323 and MGCP available upon request
  • interface: 1 Ethernet (WAN) & 1 Ethernet (PC), both 10/100baseT
  • LCD: 2 lines x 16 letters (alphanumeric matrix display)
  • Codecs: G.711 A-Law/u-Law, G.729A/B, G.723.1
  • Voice Quality: VAD, CNG, AEC (G.168),
  • Easy configuration by Web browser (IE, Konqueror, Mozilla, Safari) sample screenshot
  • Multi-user registration (4 user profiles)
  • Multi-line (10 line buttons)
  • Auto firmware upgrade (TFTP)
  • 3-way conference
  • Speed Dial (10 entries)
  • Phone Book (200 entries)
  • IP address: Static IP/PPPoE/DHCP
  • NAT traversal: UPnP and STUN
  • Handset/Speaker phone
  • DTMF modes: inband, out of band (RFC2833), SIP Info
  • Voice Mail with message waiting indicator
  • Call Waiting with audible and visual indicator
  • Call Forward (Busy, No answer, Unconditional)
  • Call Transfer (Unattended/Blind, Attended)
  • Call Park, Call Pick-up
  • Do Not Disturb (DND)
  • QoS: IEEE802.1p/q
  • Anonymous call block, Caller ID
  • Jitter buffer auto adjustment
  • Indication tones for China, France, Germany, Italy, Japan, Korea, Singapore, Spain, Turkey, Taiwan, UK, USA

Outstanding issues, ackhnowledged by manufacturer and being dealt with

  • message button doesn't dial voicemail, but is only intended to show the number of messages waiting
  • cancel button doesn't back out of the menu, instead you have to press OK or lift the handset
  • call waiting indicator tone is too loud and the pitch is too high - too intimidating
  • spaces in phone numbers in the phone book are not trimmed before dialling
  • UK tones setting doesn't sound UK at all, more like German indication tones
  • Japanese tones setting sounds alien, never heard anything like it before ;-)

Asterisk support

This phone works well with Asterisk and the manufacturer is committed to work on their firmware to ensure Asterisk interoperability.

sample entry in /etc/asterisk/sip.conf
[2000]
type=friend
auth=md5
secret=blah
qualify=yes
disallow=all
allow=ulaw
allow=alaw
allow=g729
dtmfmode=info
mailbox=2000

Manufacturer


Where to buy



Back to VoIP Phones
Created by: benjk, Last modification: Sat 07 of Jul, 2007 (05:43 UTC) by alexukie
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+