voip-info.org

Page content
Page navigation
Page extras

History

Aqua Gatekeeper
http://www.aqua.comptek.ru/man/voip/gatekeeper/index.htm

Aqua H323 Gatekeeper and proxy

Open Source VoIP software

Page content
Page navigation
Page extras

Voip-Info.org

Last modif pages

Google Ads

Get Help

Ask a question

calling between subnets
by squeezixmud Wed 06 of Aug, 2008
Hello, has anyone set up a simple asterisk system with 2 asterisks servers on 2 different subnets? My goal is to call an extension (2000) on 192.168.0.1 from extension (3000) in subnet 192.168.1.1. I would like to use sip. all I want to accomplish is calling between subnets in both directions. I do not have nat nor do I require an ISP. I am on an internal network with subnets. Anyone have sample sip.conf and extensions.conf files? Really simple ones, or files I can use parts that are needed.
I would like these to work:
(sip.conf on serverb;servera would have swapped a to b)
servera
type=peer
...
VoIP interoperability
by _malko_ Wed 06 of Aug, 2008
Hello everybody, perhaps you'll be able to light my lantern.

I would know if there are problems of interoperability in Voip for equipments like problems
which still exist between DSLAM and CPE vendor equipment?

...
Digium TE212P no Release Cause recognized properly
by fl1p Tue 05 of Aug, 2008
Hi there,

We have a TE212P here located in Germany.
It works fine for incoming und outgoing calls
but all Release Causes (like busy) is not recognized properly.
...
Re: Setting up a call centre, help needed
by ywali Sun 03 of Aug, 2008
I suggest you try Thirdlane PBX (http://www.thirdlane.com).
I did a large call center using Thirdlane.
you will find the best any easy configuration for agents, ringing groups and queue.
It has vtigercrm CRM also.

...
H.323 teardown utility
by mehdi311ggg Sat 02 of Aug, 2008
Hi
I want to write a teardown utility for H.323.
Is there any such thing ? or does anyone know how to write one.
(I want to run it on my intranet. I can capture all traffic and have all available info (especially: CallIdentifier))
Building a Release-Complete does not work (because of Seq Number problems in TCP)