Asterisk Documentation 1.4 externalivr.txt

-=NOTE: These pages are automatically updated once per
day from the Asterisk subversion repository when the repository changes revisions. Any
changes made to this page will be automatically overwritten with the
latest version from http://svn.digium.com/view/asterisk/branches/.

Asterisk External IVR Interface
-------------------------------

If you load app_externalivr.so in your Asterisk instance, you will
have an ExternalIVR() application available in your dialplan. This
application implements a simple protocol for bidirectional
communication with an external process, while simultaneous playing
audio files to the connected channel (without interruption or
blocking).

The arguments to ExternalIVR() consist of the command to execute and
any arguments to pass to it, the same as the System() application
accepts. The external command will be executed in a child process,
with its standard file handles connected to the Asterisk process as
follows:

stdin (0) - DTMF and hangup events will be received on this handle
stdout (1) - Playback and hangup commands can be sent on this handle
stderr (2) - Error messages can be sent on this handle

The application will also create an audio generator to play audio to
the channel, and will start playing silence. When your application
wants to send audio to the channel, it can send a command (see below)
to add a file to the generator's playlist. The generator will then
work its way through the list, playing each file in turn until it
either runs out of files to play, the channel is hung up, or a command
is received to clear the list and start with a new file. At any time,
more files can be added to the list and the generator will play them
in sequence.

While the generator is playing audio (or silence), any DTMF events
received on the channel will be sent to the child process (see
below). Note that this can happen at any time, since the generator,
the child process and the channel thread are all executing
independently. It is very important that your external application be
ready to receive events from Asterisk at all times (without blocking),
or you could cause the channel to become non-responsive.

If the child process dies, ExternalIVR() will notice this and hang up
the channel immediately (and also send a message to the log).

DTMF (and other) events
-----------------------

All events will be newline-terminated strings.

Events sent to the child's stdin will be in the following format:

tag,timestamp[,data]

The tag can be one of the following characters:

0-9: DTMF event for keys 0 through 9
A-D: DTMF event for keys A through D
*: DTMF event for key *
#: DTMF event for key #
H: the channel was hung up by the connected party
Z: the previous command was unable to be executed
T: the play list was interrupted (see S command below)
D: a file was dropped from the play list due to interruption (the
data element will be the dropped file name) NOTE: this tag conflicts
with the D DTMF event tag. The existence of the data element is used
to differentiate between the two cases
F: a file has finished playing (the data element will be the file
name)

The timestamp will be 10 digits long, and will be a decimal
representation of a standard Unix epoch-based timestamp.

Commands
--------

All commands must be newline-terminated strings.

The child process can send commands on stdout in the following formats:

S,filename
A,filename
H,message
O,option

The 'S' command checks to see if there is a playable audio file with
the specified name, and if so, clear's the generator's playlist and
places the file onto the list. Note that the playability check does
not take into account transcoding requirements, so it is possible for
the file to not be played even though it was found. If the generator
is not currently playing silence, then T and D events will be sent
to the child to signal the playlist interruption and notify it of
the files that will not be played.

The 'A' command checks to see if there is a playable audio file with
the specified name, and if so, adds it to the generator's
playlist. The same playability and exception rules apply as for the
'S' command.

The 'H' command stops the generator and hangs up the channel, and logs
the supplied message to the Asterisk log.

The 'O' command allows the child to set/clear options in the
ExternalIVR() application. The supported options are:
	autoclear/noautoclear:
	Automatically interrupt and clear the playlist upon reception
	of DTMF input.

Errors
------

Any newline-terminated output generated by the child process on its
stderr handle will be copied into the Asterisk log.


-=NOTE: These pages are automatically updated once per
day from the Asterisk subversion repository when the repository changes revisions. Any
changes made to this page will be automatically overwritten with the
latest version from http://svn.digium.com/view/asterisk/branches/.

Asterisk External IVR Interface
-------------------------------

If you load app_externalivr.so in your Asterisk instance, you will
have an ExternalIVR() application available in your dialplan. This
application implements a simple protocol for bidirectional
communication with an external process, while simultaneous playing
audio files to the connected channel (without interruption or
blocking).

The arguments to ExternalIVR() consist of the command to execute and
any arguments to pass to it, the same as the System() application
accepts. The external command will be executed in a child process,
with its standard file handles connected to the Asterisk process as
follows:

stdin (0) - DTMF and hangup events will be received on this handle
stdout (1) - Playback and hangup commands can be sent on this handle
stderr (2) - Error messages can be sent on this handle

The application will also create an audio generator to play audio to
the channel, and will start playing silence. When your application
wants to send audio to the channel, it can send a command (see below)
to add a file to the generator's playlist. The generator will then
work its way through the list, playing each file in turn until it
either runs out of files to play, the channel is hung up, or a command
is received to clear the list and start with a new file. At any time,
more files can be added to the list and the generator will play them
in sequence.

While the generator is playing audio (or silence), any DTMF events
received on the channel will be sent to the child process (see
below). Note that this can happen at any time, since the generator,
the child process and the channel thread are all executing
independently. It is very important that your external application be
ready to receive events from Asterisk at all times (without blocking),
or you could cause the channel to become non-responsive.

If the child process dies, ExternalIVR() will notice this and hang up
the channel immediately (and also send a message to the log).

DTMF (and other) events
-----------------------

All events will be newline-terminated strings.

Events sent to the child's stdin will be in the following format:

tag,timestamp[,data]

The tag can be one of the following characters:

0-9: DTMF event for keys 0 through 9
A-D: DTMF event for keys A through D
*: DTMF event for key *
#: DTMF event for key #
H: the channel was hung up by the connected party
Z: the previous command was unable to be executed
T: the play list was interrupted (see S command below)
D: a file was dropped from the play list due to interruption (the
data element will be the dropped file name) NOTE: this tag conflicts
with the D DTMF event tag. The existence of the data element is used
to differentiate between the two cases
F: a file has finished playing (the data element will be the file
name)

The timestamp will be 10 digits long, and will be a decimal
representation of a standard Unix epoch-based timestamp.

Commands
--------

All commands must be newline-terminated strings.

The child process can send commands on stdout in the following formats:

S,filename
A,filename
H,message
O,option

The 'S' command checks to see if there is a playable audio file with
the specified name, and if so, clear's the generator's playlist and
places the file onto the list. Note that the playability check does
not take into account transcoding requirements, so it is possible for
the file to not be played even though it was found. If the generator
is not currently playing silence, then T and D events will be sent
to the child to signal the playlist interruption and notify it of
the files that will not be played.

The 'A' command checks to see if there is a playable audio file with
the specified name, and if so, adds it to the generator's
playlist. The same playability and exception rules apply as for the
'S' command.

The 'H' command stops the generator and hangs up the channel, and logs
the supplied message to the Asterisk log.

The 'O' command allows the child to set/clear options in the
ExternalIVR() application. The supported options are:
	autoclear/noautoclear:
	Automatically interrupt and clear the playlist upon reception
	of DTMF input.

Errors
------

Any newline-terminated output generated by the child process on its
stderr handle will be copied into the Asterisk log.


Created by: josiahbryan, Last modification: Sun 25 of Jul, 2010 (08:39 UTC)
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+