From sla.conf:

; Configuration file for SLAs (Shared Line Appearances).

Defining a SLA uses the following syntax

;
; type => Technology/TechData
;
; type => trunk or station
; Technology => the channel driver (see show channeltypes)
; TechData => the data specific to the channel driver
;
; The Technology/TechData information is the same as that provided to the
; Dial application.
;

; define a SLA called junky
[junky]
trunk => SIP/10
station => SIP/15
station => SIP/16

;define a SLA called markster
[markster]
trunk => Zap/1
station => SIP/20

; Also you can see SLA infos via the CLI, by typing "sla show"

See also

• Asterisk cmd SLAStation
• Asterisk cmd SLATrunk
• Asterisk SLA
• Discussion on SLA, parking and BLF (busy lamp field)
• Statement of Digium (by Kevin) on SLA for Asterisk (Jan 2006)
• Asterisk cmd BristuffDevstate
• RFC 3891/3892 (not -yet- supported by Asterisk)
• Asterisk cmd Pickup

---

Go back to Asterisk