Asterisk phone swissvoice ip10s config

Sample configip10.cfg


 ##############################################################################
 #   This file is the configuration file of the IP10S. Inside you can put all  #
 # the commands which allow to set parameters through TELNET.                  #
 # This file is loaded at the end of the application start.                    #
 # Each line begining by '#' is a comment line                                 #
 #############################################################################
                     
 ##############################################################################
 #   Add the deck files for the RFC3149                                        #
 #                                                                             #
 # Command:                                                                    #
 #    addDeckFile [deck name] [source <FTP|TFTP>]                              #
 #                                                                             #
 ##############################################################################
 #addDeckFile deck TFTP
 
 ##############################################################################
 #   Configure the Feature keys value for the RFC3149                          #
 ##############################################################################
 # Feature key description:                                                    #
 #  - F1..F4 -> Feature key number 1 to 4                                      #
 #  - PB     -> Phone book logo Feature key                                    #
 #  - FUNC   -> Dot Feature key                                                #
 #  - DOWN   -> Down Feature key                                               #
 #  - L0..L9 -> Long Key press on 0 to 9                                       #
 
 ##############################################################################
 set rfc3149 FK_Value F1 1
 set rfc3149 FK_Value F2 2
 set rfc3149 FK_Value F3 3
 set rfc3149 FK_Value F4 4
 set rfc3149 FK_Value PB 110
 set rfc3149 FK_Value FUNC 0
 set rfc3149 FK_Value DOWN 0
 set rfc3149 FK_Value L0 99
 set rfc3149 FK_Value L1 0
 set rfc3149 FK_Value L2 0
 set rfc3149 FK_Value L3 0
 set rfc3149 FK_Value L4 0
 set rfc3149 FK_Value L5 0
 set rfc3149 FK_Value L6 0
 set rfc3149 FK_Value L7 0
 set rfc3149 FK_Value L8 0
 set rfc3149 FK_Value L9 0
 
 ##############################################################################
 # Configure the Feature keys color and blinking state for the RFC3149         #
 ##############################################################################
 # Command:                                                                    #
 # set rfc3149 FKI_Value [string_state] [led color value] [led state value]    #
 # 	                                                                      #
 #  - string_state Value:                                                      #
 #    * en -> enable, 	                                                      #
 #    * db -> disable,                                                         #
 #    * id -> idle,                                                            #
 #    * dt -> dial tone,	                                                      #
 #    * cn -> connected,	                                                      #
 #    * dc -> disconnected,                                                    #
 #    * rg -> ringing,                                                         #
 #    * rb -> ring back tone,                                                  #
 #    * ho -> hold,                                                            #
 #    * he -> held.                                                            #
 #                                                                             #
 #  - Led color value:                                                         #
 #    * 0 -> COLOUR_OFF,                                                       #
 #    * 1 -> RED,                                                              #
 #    * 2 -> GREEN,                                                            #
 #    * 3 -> ORANGE.                                                           #
 #                                                                             #
 #  - Led state value: 0, 1, 2, 3, 4, 5                                        #
 #    * 0 -> UNLIT,                                                            #
 #    * 1 -> FLASH,                                                            #
 #    * 2 -> BLINK_SLOW,	                                                      #
 #    * 3 -> BLINK_FAST,                                                       #
 #    * 4 -> PERM_LIT,                                                         #
 #    * 5 -> BLINK_STATE.                                                      #
 ##############################################################################
 #set rfc3149 FKI_Value en 2 5
 
 ##############################################################################
 #   Set the DTMF echo when press digits                                       #
 ##############################################################################
 set tcid 0 ipp kpad_echo off
 set coding 1 dtmf_relay on
 
 ##############################################################################
 # Set the MGCP Call agent Address                                             #
 ##############################################################################
 set tcid 0 cw_resend_time 6
 
 ##############################################################################
 # Set the MGCP Package notification                                           #
 ##############################################################################
 set xgcp PackageNotify TRUE
 
 ##############################################################################
 # Set the MGCP String identification                                          #
 #   - rgw_name :                                                              #
 #       * NO_MAME                                                             #
 #       * IP_ADDR for the IP address                                          #
 #       * MAC_ADDR for the MAC address                                        #
 #       * STRING xxxx where xxxx is the rgw name                              #
 #   - ep_name :                                                               #
 #       * DEFAULT for the default end point name aaln/1                       #
 #       * STRING xxxx where xxxx is the end point name                        #
 ##############################################################################
 set xgcp ep_name STRING aaln/1
 ##############################################################################
 # Set the RTP Base and Destination Port (1024 to 65535)                       #
 ##############################################################################
 # set xgcp RtpBasePort 30000
 #set xgcp RtpDestPort DYNAMIC
 set xgcp rgw_name IP_ADDR
 set tcid 0 notify_entity ca@[172.28.4.5]:2727
 
 ##############################################################################
 # Set the utilities parameters                                                #
 ##############################################################################
 #set utilities sntp_mode broadcast
 set utilities sntp_mode request
 set utilities sntp_srv_ipaddr 172.28.4.5
 set utilities sntp_rqnt_freq 1 0
 set utilities sntp_daylightsaving on
 set utilities sntp_time_zone 12
 set utilities tone_table EU
 
 
 #############################################################
 #   SET THE FEATURES                                        #
 #############################################################
 # SET THE KNOWN FEATURES
 #  set features <name> <hookflash[TRUE/FALSE]> [sequence]
 #  set features remove all
 #  set features remove <name>
 #     with <name> matching to
 #           1 -  CFU_ON...........Call Forward Unconditional Active
 #           2 -  CFU_OFF..........Call Forward Unconditional Unactive
 #           3 -  CFR_ON...........Call Forward On No Reply Active
 #           4 -  CFR_OFF..........Call Forward On No Reply Unactive
 #           5 -  CFB_ON...........Call Forward On Busy Active
 #           6 -  CFB_OFF..........Call Forward On No Reply Unactive
 #           7 -  DND_ON...........Do Not Disturb Active
 #           8 -  DND_OFF..........Do Not Disturb Unactive
 #           9 -  VOICEMAIL........Voice mail
 #           10 - PICKUPCALL.......Pickup Call
 #           11 - CR...............Call brokeRing
 #           12 - CTB..............Call Take Back
 #           13 - CH...............Call Hold
 #           14 - CE...............Call Enquiry
 #           15 - CF...............Call conFerence
 #           16 - CWA..............Call Waiting Accept
 #           17 - CWR..............Call Waiting Reject
 #           18 - CWE..............Call Waiting End
 #           19 - CFR..............Call conFerence Remove
 #           20 - CCNR.............Call Completion on No Response
 #           21 - CCBS.............Call Completion on Busy Subscriber
 #           22 - FLASH............Flashing
 
 set features remove all
 set features CH TRUE
 set features CE TRUE
 set features CTB TRUE
 set features CR TRUE
 set features CWA TRUE
 set features FLASH TRUE
 set features VOICEMAIL FALSE 1210
 
 
 # SET THE NEW FEATURES
 #   set features new <id[1..20]> "name" <info[INFO/NOINFO]> 
 #          <confirmation[CONF/NOCONF]> <hookflash[TRUE/FALSE]> <[sequence|NOSEQ]>
 # INFO means we need more info as a number(transfer)
 # CONF means we need a screen for confirmation
 #set features new 1 "service 1" NOINFO NOCONF TRUE 7
 #set features new 2 "service 2" NOINFO NOCONF TRUE 8
 #set features new 3 "My enquiry call" NOINFO NOCONF TRUE 1 
 
 set features new 1 "Transfer" NOINFO NOCONF TRUE NOSEQ
 
 set features new 2 "Operator" NOINFO NOCONF FALSE 4340570
 
 
 
 #
 # ACTIVATE THE KNOWN and NEW FEATURES IN THE IPPHONE STATES
 # for the nuber at the end, it's a concatenation of the ID given 
 # by the 'show features' commands.
 #  set service_state <state name> <service_state[KNOWN|NEW]> <feature value[1..20|..]>
 #     with <state name> matching to
 #          IDLE.......................IDLE state
 #          ONE_RINGING_LINE...........One RINGING line
 #          ONE_DIALING_LINE...........One DIALING line
 #          ONE_CALLING_LINE...........One CALLING line
 #          ONE_ACTIVE_LINE............One ACTIVE line
 #          ONE_BUSY_LINE..............One BUSY line
 #          ONE_HOLD_LINE..............One HELD line
 #          TWO_LINES_RINGING..........One line in RINGING + one line RINGING
 #          TWO_LINES_CWT..............One line ACTIVE     + one line RINGING
 #          TWO_LINES_DIALING..........One line in HOLD    + one line DIALING
 #          TWO_LINES_CALLING..........One line in HOLD    + one CALLING line
 #          TWO_LINES_ACTIVE...........One line in HOLD    + one line ACTIVE
 #          TWO_LINES_BUSY.............One line in HOLD    + one line BUSY
 #set service_state IDLE KNOWN 1|2|3|4|5|6|7|8|9|10
 #set service_state ONE_RINGING_LINE KNOWN 0
 #set service_state ONE_DIALING_LINE KNOWN 9|10|22
 #set service_state ONE_CALLING_LINE KNOWN 20|22
 #set service_state ONE_ACTIVE_LINE KNOWN 13|14|22
 #set service_state ONE_ACTIVE_LINE NEW 5
 #set service_state ONE_BUSY_LINE KNOWN 21|22
 #set service_state ONE_HOLD_LINE KNOWN 12|14|22
 #set service_state TWO_LINES_RINGING KNOWN 0
 #set service_state TWO_LINES_CWT KNOWN 16|17|18|22
 #set service_state TWO_LINES_DIALING KNOWN 12|10|9|22
 #set service_state TWO_LINES_CALLING KNOWN 20|22|12
 #set service_state TWO_LINES_ACTIVE KNOWN 11|22
 #set service_state TWO_LINES_BUSY KNOWN 22|21
 
 set service_state IDLE KNOWN 9
 set service_state IDLE NEW 2
 set service_state ONE_RINGING_LINE KNOWN 0
 set service_state ONE_DIALING_LINE KNOWN 22
 set service_state ONE_CALLING_LINE KNOWN 22
 set service_state ONE_ACTIVE_LINE NEW 1
 #set service_state ONE_ACTIVE_LINE KNOWN 13|14|22
 set service_state ONE_ACTIVE_LINE KNOWN 0
 set service_state ONE_BUSY_LINE KNOWN 22
 set service_state ONE_HOLD_LINE KNOWN 12|14|22
 set service_state TWO_LINES_RINGING KNOWN 0
 set service_state TWO_LINES_CWT KNOWN 16|17|18|22
 set service_state TWO_LINES_DIALING KNOWN 12|10|9|22
 set service_state TWO_LINES_CALLING KNOWN 20|22|12
 set service_state TWO_LINES_ACTIVE KNOWN 11|22
 set service_state TWO_LINES_BUSY KNOWN 22
 
 
 #############################################################
 #   END OF SET THE FEATURES                                 #
 #############################################################


 #############################################################
 #   SET THE CONF TONE TABLE                                 #
 #############################################################
 set tone nbElem DL 1
 set tone element DL 1 inf 350 -130 450 -130
 set tone nbElem RT 4
 set tone element RT 1 400 400 -130 450 -130
 set tone element RT 2 200 0 0
 set tone element RT 3 400 400 -130 450 -130
 set tone element RT 4 2000 0 0
 set tone nbElem BZ 2
 set tone element BZ 1 375 400 -60
 set tone element BZ 2 375 0 0
 set tone nbElem BDL 2
 set tone element BDL 1 1200 350 -130 450 -130
 set tone element BDL 2 300 0 0
 set tone nbElem WT1 2
 set tone element WT1 1 100 1000 -60
 set tone element WT1 2 2000 0 0
 set tone nbElem WT2 4
 set tone element WT2 1 70 400 -60
 set tone element WT2 2 50 0 0
 set tone element WT2 3 70 400 -60
 set tone element WT2 4 2000 0 0
 set tone nbElem WT3 6
 set tone element WT3 1 250 900 -60
 set tone element WT3 2 250 0 0
 set tone element WT3 3 250 400 -60
 set tone element WT3 4 250 0 0
 set tone element WT3 5 250 400 -60
 set tone element WT3 6 1000 0 0
 set tone nbElem WT4 2
 set tone element WT4 1 60 400 -60
 set tone element WT4 2 2000 0 0
 #############################################################
 #   END OF THE CONF TONE TABLE SET UP                       #
 #############################################################

 
 ##############################################################################
 # Activate the parameters                                                     #
 ##############################################################################
 activate
 
 ##############################################################################
 # Set the parameters in flash memory                                          #
 ##############################################################################
 commit


Go back to Asterisk phone swissvoice ip10s

Sample configip10.cfg


 ##############################################################################
 #   This file is the configuration file of the IP10S. Inside you can put all  #
 # the commands which allow to set parameters through TELNET.                  #
 # This file is loaded at the end of the application start.                    #
 # Each line begining by '#' is a comment line                                 #
 #############################################################################
                     
 ##############################################################################
 #   Add the deck files for the RFC3149                                        #
 #                                                                             #
 # Command:                                                                    #
 #    addDeckFile [deck name] [source <FTP|TFTP>]                              #
 #                                                                             #
 ##############################################################################
 #addDeckFile deck TFTP
 
 ##############################################################################
 #   Configure the Feature keys value for the RFC3149                          #
 ##############################################################################
 # Feature key description:                                                    #
 #  - F1..F4 -> Feature key number 1 to 4                                      #
 #  - PB     -> Phone book logo Feature key                                    #
 #  - FUNC   -> Dot Feature key                                                #
 #  - DOWN   -> Down Feature key                                               #
 #  - L0..L9 -> Long Key press on 0 to 9                                       #
 
 ##############################################################################
 set rfc3149 FK_Value F1 1
 set rfc3149 FK_Value F2 2
 set rfc3149 FK_Value F3 3
 set rfc3149 FK_Value F4 4
 set rfc3149 FK_Value PB 110
 set rfc3149 FK_Value FUNC 0
 set rfc3149 FK_Value DOWN 0
 set rfc3149 FK_Value L0 99
 set rfc3149 FK_Value L1 0
 set rfc3149 FK_Value L2 0
 set rfc3149 FK_Value L3 0
 set rfc3149 FK_Value L4 0
 set rfc3149 FK_Value L5 0
 set rfc3149 FK_Value L6 0
 set rfc3149 FK_Value L7 0
 set rfc3149 FK_Value L8 0
 set rfc3149 FK_Value L9 0
 
 ##############################################################################
 # Configure the Feature keys color and blinking state for the RFC3149         #
 ##############################################################################
 # Command:                                                                    #
 # set rfc3149 FKI_Value [string_state] [led color value] [led state value]    #
 # 	                                                                      #
 #  - string_state Value:                                                      #
 #    * en -> enable, 	                                                      #
 #    * db -> disable,                                                         #
 #    * id -> idle,                                                            #
 #    * dt -> dial tone,	                                                      #
 #    * cn -> connected,	                                                      #
 #    * dc -> disconnected,                                                    #
 #    * rg -> ringing,                                                         #
 #    * rb -> ring back tone,                                                  #
 #    * ho -> hold,                                                            #
 #    * he -> held.                                                            #
 #                                                                             #
 #  - Led color value:                                                         #
 #    * 0 -> COLOUR_OFF,                                                       #
 #    * 1 -> RED,                                                              #
 #    * 2 -> GREEN,                                                            #
 #    * 3 -> ORANGE.                                                           #
 #                                                                             #
 #  - Led state value: 0, 1, 2, 3, 4, 5                                        #
 #    * 0 -> UNLIT,                                                            #
 #    * 1 -> FLASH,                                                            #
 #    * 2 -> BLINK_SLOW,	                                                      #
 #    * 3 -> BLINK_FAST,                                                       #
 #    * 4 -> PERM_LIT,                                                         #
 #    * 5 -> BLINK_STATE.                                                      #
 ##############################################################################
 #set rfc3149 FKI_Value en 2 5
 
 ##############################################################################
 #   Set the DTMF echo when press digits                                       #
 ##############################################################################
 set tcid 0 ipp kpad_echo off
 set coding 1 dtmf_relay on
 
 ##############################################################################
 # Set the MGCP Call agent Address                                             #
 ##############################################################################
 set tcid 0 cw_resend_time 6
 
 ##############################################################################
 # Set the MGCP Package notification                                           #
 ##############################################################################
 set xgcp PackageNotify TRUE
 
 ##############################################################################
 # Set the MGCP String identification                                          #
 #   - rgw_name :                                                              #
 #       * NO_MAME                                                             #
 #       * IP_ADDR for the IP address                                          #
 #       * MAC_ADDR for the MAC address                                        #
 #       * STRING xxxx where xxxx is the rgw name                              #
 #   - ep_name :                                                               #
 #       * DEFAULT for the default end point name aaln/1                       #
 #       * STRING xxxx where xxxx is the end point name                        #
 ##############################################################################
 set xgcp ep_name STRING aaln/1
 ##############################################################################
 # Set the RTP Base and Destination Port (1024 to 65535)                       #
 ##############################################################################
 # set xgcp RtpBasePort 30000
 #set xgcp RtpDestPort DYNAMIC
 set xgcp rgw_name IP_ADDR
 set tcid 0 notify_entity ca@[172.28.4.5]:2727
 
 ##############################################################################
 # Set the utilities parameters                                                #
 ##############################################################################
 #set utilities sntp_mode broadcast
 set utilities sntp_mode request
 set utilities sntp_srv_ipaddr 172.28.4.5
 set utilities sntp_rqnt_freq 1 0
 set utilities sntp_daylightsaving on
 set utilities sntp_time_zone 12
 set utilities tone_table EU
 
 
 #############################################################
 #   SET THE FEATURES                                        #
 #############################################################
 # SET THE KNOWN FEATURES
 #  set features <name> <hookflash[TRUE/FALSE]> [sequence]
 #  set features remove all
 #  set features remove <name>
 #     with <name> matching to
 #           1 -  CFU_ON...........Call Forward Unconditional Active
 #           2 -  CFU_OFF..........Call Forward Unconditional Unactive
 #           3 -  CFR_ON...........Call Forward On No Reply Active
 #           4 -  CFR_OFF..........Call Forward On No Reply Unactive
 #           5 -  CFB_ON...........Call Forward On Busy Active
 #           6 -  CFB_OFF..........Call Forward On No Reply Unactive
 #           7 -  DND_ON...........Do Not Disturb Active
 #           8 -  DND_OFF..........Do Not Disturb Unactive
 #           9 -  VOICEMAIL........Voice mail
 #           10 - PICKUPCALL.......Pickup Call
 #           11 - CR...............Call brokeRing
 #           12 - CTB..............Call Take Back
 #           13 - CH...............Call Hold
 #           14 - CE...............Call Enquiry
 #           15 - CF...............Call conFerence
 #           16 - CWA..............Call Waiting Accept
 #           17 - CWR..............Call Waiting Reject
 #           18 - CWE..............Call Waiting End
 #           19 - CFR..............Call conFerence Remove
 #           20 - CCNR.............Call Completion on No Response
 #           21 - CCBS.............Call Completion on Busy Subscriber
 #           22 - FLASH............Flashing
 
 set features remove all
 set features CH TRUE
 set features CE TRUE
 set features CTB TRUE
 set features CR TRUE
 set features CWA TRUE
 set features FLASH TRUE
 set features VOICEMAIL FALSE 1210
 
 
 # SET THE NEW FEATURES
 #   set features new <id[1..20]> "name" <info[INFO/NOINFO]> 
 #          <confirmation[CONF/NOCONF]> <hookflash[TRUE/FALSE]> <[sequence|NOSEQ]>
 # INFO means we need more info as a number(transfer)
 # CONF means we need a screen for confirmation
 #set features new 1 "service 1" NOINFO NOCONF TRUE 7
 #set features new 2 "service 2" NOINFO NOCONF TRUE 8
 #set features new 3 "My enquiry call" NOINFO NOCONF TRUE 1 
 
 set features new 1 "Transfer" NOINFO NOCONF TRUE NOSEQ
 
 set features new 2 "Operator" NOINFO NOCONF FALSE 4340570
 
 
 
 #
 # ACTIVATE THE KNOWN and NEW FEATURES IN THE IPPHONE STATES
 # for the nuber at the end, it's a concatenation of the ID given 
 # by the 'show features' commands.
 #  set service_state <state name> <service_state[KNOWN|NEW]> <feature value[1..20|..]>
 #     with <state name> matching to
 #          IDLE.......................IDLE state
 #          ONE_RINGING_LINE...........One RINGING line
 #          ONE_DIALING_LINE...........One DIALING line
 #          ONE_CALLING_LINE...........One CALLING line
 #          ONE_ACTIVE_LINE............One ACTIVE line
 #          ONE_BUSY_LINE..............One BUSY line
 #          ONE_HOLD_LINE..............One HELD line
 #          TWO_LINES_RINGING..........One line in RINGING + one line RINGING
 #          TWO_LINES_CWT..............One line ACTIVE     + one line RINGING
 #          TWO_LINES_DIALING..........One line in HOLD    + one line DIALING
 #          TWO_LINES_CALLING..........One line in HOLD    + one CALLING line
 #          TWO_LINES_ACTIVE...........One line in HOLD    + one line ACTIVE
 #          TWO_LINES_BUSY.............One line in HOLD    + one line BUSY
 #set service_state IDLE KNOWN 1|2|3|4|5|6|7|8|9|10
 #set service_state ONE_RINGING_LINE KNOWN 0
 #set service_state ONE_DIALING_LINE KNOWN 9|10|22
 #set service_state ONE_CALLING_LINE KNOWN 20|22
 #set service_state ONE_ACTIVE_LINE KNOWN 13|14|22
 #set service_state ONE_ACTIVE_LINE NEW 5
 #set service_state ONE_BUSY_LINE KNOWN 21|22
 #set service_state ONE_HOLD_LINE KNOWN 12|14|22
 #set service_state TWO_LINES_RINGING KNOWN 0
 #set service_state TWO_LINES_CWT KNOWN 16|17|18|22
 #set service_state TWO_LINES_DIALING KNOWN 12|10|9|22
 #set service_state TWO_LINES_CALLING KNOWN 20|22|12
 #set service_state TWO_LINES_ACTIVE KNOWN 11|22
 #set service_state TWO_LINES_BUSY KNOWN 22|21
 
 set service_state IDLE KNOWN 9
 set service_state IDLE NEW 2
 set service_state ONE_RINGING_LINE KNOWN 0
 set service_state ONE_DIALING_LINE KNOWN 22
 set service_state ONE_CALLING_LINE KNOWN 22
 set service_state ONE_ACTIVE_LINE NEW 1
 #set service_state ONE_ACTIVE_LINE KNOWN 13|14|22
 set service_state ONE_ACTIVE_LINE KNOWN 0
 set service_state ONE_BUSY_LINE KNOWN 22
 set service_state ONE_HOLD_LINE KNOWN 12|14|22
 set service_state TWO_LINES_RINGING KNOWN 0
 set service_state TWO_LINES_CWT KNOWN 16|17|18|22
 set service_state TWO_LINES_DIALING KNOWN 12|10|9|22
 set service_state TWO_LINES_CALLING KNOWN 20|22|12
 set service_state TWO_LINES_ACTIVE KNOWN 11|22
 set service_state TWO_LINES_BUSY KNOWN 22
 
 
 #############################################################
 #   END OF SET THE FEATURES                                 #
 #############################################################


 #############################################################
 #   SET THE CONF TONE TABLE                                 #
 #############################################################
 set tone nbElem DL 1
 set tone element DL 1 inf 350 -130 450 -130
 set tone nbElem RT 4
 set tone element RT 1 400 400 -130 450 -130
 set tone element RT 2 200 0 0
 set tone element RT 3 400 400 -130 450 -130
 set tone element RT 4 2000 0 0
 set tone nbElem BZ 2
 set tone element BZ 1 375 400 -60
 set tone element BZ 2 375 0 0
 set tone nbElem BDL 2
 set tone element BDL 1 1200 350 -130 450 -130
 set tone element BDL 2 300 0 0
 set tone nbElem WT1 2
 set tone element WT1 1 100 1000 -60
 set tone element WT1 2 2000 0 0
 set tone nbElem WT2 4
 set tone element WT2 1 70 400 -60
 set tone element WT2 2 50 0 0
 set tone element WT2 3 70 400 -60
 set tone element WT2 4 2000 0 0
 set tone nbElem WT3 6
 set tone element WT3 1 250 900 -60
 set tone element WT3 2 250 0 0
 set tone element WT3 3 250 400 -60
 set tone element WT3 4 250 0 0
 set tone element WT3 5 250 400 -60
 set tone element WT3 6 1000 0 0
 set tone nbElem WT4 2
 set tone element WT4 1 60 400 -60
 set tone element WT4 2 2000 0 0
 #############################################################
 #   END OF THE CONF TONE TABLE SET UP                       #
 #############################################################

 
 ##############################################################################
 # Activate the parameters                                                     #
 ##############################################################################
 activate
 
 ##############################################################################
 # Set the parameters in flash memory                                          #
 ##############################################################################
 commit


Go back to Asterisk phone swissvoice ip10s

Created by: JustRumours, Last modification: Sun 17 of Jun, 2012 (06:16 UTC) by admin
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+