Asterisk settings for TEO

These are Asterisk settings for using TEO Zebra VoIP service. It was tested on version 1.6.2.5.

sip.conf:



[general] 
context=default                 ; Default context for incoming calls 
allowoverlap=no                 ; Disable overlap dialing support. (Default is yes) 
udpbindaddr=0.0.0.0             ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) 
                                ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) 


bindport=5060 
srvlookup=yes                   ; Enable DNS SRV lookups on outbound calls 
                                ; Note: Asterisk only uses the first host 
                                ; in SRV records 
                                ; Disabling DNS SRV lookups disables the 
                                ; ability to place SIP calls based on domain 
                                ; names to some other SIP users on the Internet 

dtmfmode = rfc2833             ; Set default dtmfmode for sending DTMF. Default: rfc2833 

session-timers=originate 
session-expires=1800 
session-minse=180 
session-refresher=uas 

register => 370700XXXXX:pass_word@skambink.zebra.lt 

[zebravoip] 
type=peer 
context=default 
secret=pass_word 
remotesecret=pass_word 
defaultuser=370700XXXXX
fromuser=370700XXXXX 
fromdomain=skambink.zebra.lt 
;host=skambink.zebra.lt 
host=212.59.4.20 
qualify=yes 
context=default 
transport=udp 
insecure=invite 
outboundproxy=212.59.4.20 
port=5060



extensions.conf file:


[general] 
static=yes 
writeprotect=yes 
clearglobalvars=no 

[globals] 
CONSOLE=Console/dsp				; Console interface for demo 
TRUNK=DAHDI/G2					; Trunk interface 

[default] 

exten => s,1,Dial(Console/dsp) 
exten => s,2,Hangup() 

exten => _8XXXXXXXX,1,Dial(SIP/${EXTEN}@zebravoip,,r) 
exten => _8XXXXXXXX,2,Hangup() 

exten => _9.,1,Dial(SIP/${EXTEN}@zebravoip,,r)
exten => _9.,2,Hangup()



These are Asterisk settings for using TEO Zebra VoIP service. It was tested on version 1.6.2.5.

sip.conf:



[general] 
context=default                 ; Default context for incoming calls 
allowoverlap=no                 ; Disable overlap dialing support. (Default is yes) 
udpbindaddr=0.0.0.0             ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) 
                                ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) 


bindport=5060 
srvlookup=yes                   ; Enable DNS SRV lookups on outbound calls 
                                ; Note: Asterisk only uses the first host 
                                ; in SRV records 
                                ; Disabling DNS SRV lookups disables the 
                                ; ability to place SIP calls based on domain 
                                ; names to some other SIP users on the Internet 

dtmfmode = rfc2833             ; Set default dtmfmode for sending DTMF. Default: rfc2833 

session-timers=originate 
session-expires=1800 
session-minse=180 
session-refresher=uas 

register => 370700XXXXX:pass_word@skambink.zebra.lt 

[zebravoip] 
type=peer 
context=default 
secret=pass_word 
remotesecret=pass_word 
defaultuser=370700XXXXX
fromuser=370700XXXXX 
fromdomain=skambink.zebra.lt 
;host=skambink.zebra.lt 
host=212.59.4.20 
qualify=yes 
context=default 
transport=udp 
insecure=invite 
outboundproxy=212.59.4.20 
port=5060



extensions.conf file:


[general] 
static=yes 
writeprotect=yes 
clearglobalvars=no 

[globals] 
CONSOLE=Console/dsp				; Console interface for demo 
TRUNK=DAHDI/G2					; Trunk interface 

[default] 

exten => s,1,Dial(Console/dsp) 
exten => s,2,Hangup() 

exten => _8XXXXXXXX,1,Dial(SIP/${EXTEN}@zebravoip,,r) 
exten => _8XXXXXXXX,2,Hangup() 

exten => _9.,1,Dial(SIP/${EXTEN}@zebravoip,,r)
exten => _9.,2,Hangup()



Created by: rl1987, Last modification: Wed 15 of Dec, 2010 (17:12 UTC)
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+