Asterisk supported ISDN cards

VoIP Hardware Solutions
Provider Solution Details
VoIP Hardware Zycoo UC Solutions
  • Modular Design IP PBX for SMB
  • Remote office Centralized Management solution
  • 3rd party app integration, Enterprise Billing, Android & iOS client
Details
Yeastar Communications Solutions
  • Cost-effective IP-PBX Solution for SMB
  • FXS, FXO, GSM, BRI and PRI VoIP Gateways
  • Rich features and reliable performance
Details
This page will contain a list of supported ISDN cards, modes in which they work and example configuration that is known to work. Only verified cards and scenarios should go here. Entries must include kernel and driver version (where relevant) lso, list is incomplete, there might be cards that work, but are not here. Consider this a stub. You are very welcome to update it.

ISDN2


HFC PCI Passive ISDN


This card is known to work in TE and NT mode.
  • Software: bristuff-0.2.0-RC8f-CVS (includes patches to (*))
  • Channel: zap
  • Connected to: Alcatel OmniPCX digital S0 port
  • Configuration (TE mode):

/etc/zaptel.conf:

loadzone = us
defaultzone=us
span=1,0,3,ccs,ami
bchan=1-2
dchan=3


/etc/asterisk/zapata.conf

; zapata.conf
\[channels\]
switchtype = euroisdn
signalling = bri_cpe_ptmp
echocancel=64
immediate=no
group = 1
context = incoming
channel => 1-2


Dialstring:

exten => _XX,1,SetCallerId(61)
exten => _XX,n,Dial(ZAP/g1/${EXTEN})



This page will contain a list of supported ISDN cards, modes in which they work and example configuration that is known to work. Only verified cards and scenarios should go here. Entries must include kernel and driver version (where relevant) lso, list is incomplete, there might be cards that work, but are not here. Consider this a stub. You are very welcome to update it.

ISDN2


HFC PCI Passive ISDN


This card is known to work in TE and NT mode.
  • Software: bristuff-0.2.0-RC8f-CVS (includes patches to (*))
  • Channel: zap
  • Connected to: Alcatel OmniPCX digital S0 port
  • Configuration (TE mode):

/etc/zaptel.conf:

loadzone = us
defaultzone=us
span=1,0,3,ccs,ami
bchan=1-2
dchan=3


/etc/asterisk/zapata.conf

; zapata.conf
\[channels\]
switchtype = euroisdn
signalling = bri_cpe_ptmp
echocancel=64
immediate=no
group = 1
context = incoming
channel => 1-2


Dialstring:

exten => _XX,1,SetCallerId(61)
exten => _XX,n,Dial(ZAP/g1/${EXTEN})



Created by: konrads, Last modification: Thu 04 of Nov, 2010 (06:44 UTC) by admin
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+