I've successfully used the settings below with Asterisk@Home 1.3 & 1.5 and Broadvoice BYOD:

Add a SIP Trunk:

Maximum channels: 2
Outgoing Dial Rules
 1+NXXNXXXXXX
 1{AC}+NXXXXXX

Trunk Name: Broadvoice (doesn't really matter what you put here)
PEER Details:
 allow=ulaw
 authname={Your BV Number}
 authuser={Your BV Number}
 canreinvite=no
 context=from-pstn
 disallow=all
 dtmf=inband
 dtmfmode=inband
 fromdomain=sip.broadvoice.com
 fromuser={Your BV Number}
 host=sip.broadvoice.com
 insecure=very
 nat=yes
 qualify=yes
 regexten={Your BV Number}
 secret={Your BV Secret}
 type=peer
 user=phone
 username={Your BV Number}

User Context: (leave this blank)
User Details: (leave this blank)

Register String:
{Your BV Number}@sip.broadvoice.com:{Your BV Secret}:{Your BV Number}@sip.broadvoice.com/{Your BV Number}

NOTE1: Replace {Your BV Number} with your Broadvoice phone number
NOTE2: Replace {Your BV Secret} with your Broadvoice SIP secret. THIS IS NOT YOUR WEB PAGE PASSWORD! Your secret can be determined on the BV site by looking here: Account / My Devices / Show Settings / Auth Password

Next add a DID Route:

DID Number: {Your BV Number}
Set Destination: Use 'Incoming Calls' settings


BroadVoice/Asterisk@Home configuration help is also available at the BroadVoice Support Forum.

• 2005-08-31 - Geek Gazette has just posted a new guide on using Broadvoice with Asterisk@Home 1.5