Clipcomm Phones

Clipcomm VOIP Phones

VoIP Phone (Low cost) CP-100

Clipcomm CP-100 is a standard-based telephone designed to use IP-PBX system with a low-cost. Since it is directly connected to the LAN or broadband modems, users can exploit the economical efficiency of VoIP. CP-100 supports essential VoIP phone functions.
  • 16x2 character LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Single 10/100 Base-T, RJ-45
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems

VoIP Phone (Dual Ethernet) CP-100D

Clipcomm CP-100D is a low-cost and standard-based business telephone that suits for using IP-PBX systems. It supports integrated NAT router function with its dual switched Ethernet ports, which enables the co-located PCs to share the Internet connection without compromising the voice quality during VoIP calls.
  • 16x2 character LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Dual switched 10/100Base-T, RJ-45
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems

VoIP Phone (PSTN Lifeline function) CP-100P

Clipcomm CP-100P is a useful endpoint device in case of failure in power supply, since its RJ-11 port for PSTN connection contains the PSTN lifeline function. It supports dual switched Ethernet ports that enable the co-located PCs to share the Internet connection without compromising the voice quality during VoIP calls.
  • 16x2 Character LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Dual switched 10/100Base-T, RJ-45
  • PSTN Lifeline function
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems

VoIP Phone (Wi-Fi Extensible) CP-100E

CP-100E has a unique wireless extensible feature that enlarges the range of application areas. Once an IEEE 802.11b CF card is inserted into CP-100E’s extension slot, it becomes either a WLAN ‘access point’ for nearby mobile terminals or WLAN ‘station’ that can be wirelessly connected to the Internet through nearby access points.
Clipcomm CP-100E supports dual switched Ethernet ports that enable the co-located PCs to share the Internet connection without compromising the voice quality during VoIP calls.
  • 16x2 Character LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Dual switched 10/100Base-T, RJ-45
  • IEEE 802.11b Extension for WALN AP or Station function (additional IEEE 802.b CF WLAN Card required
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems

VOIP Phone (PSTN/VoIP dual mode) CP-101

Clipcomm CP-101 is a full-featured VoIP/PSTN dual mode phone that has RJ-11 port with 128x64 graphic LCD display. Its RJ-11 port for PSTN connection can also operate as the remote-access FXO gateway. Thus, users even at a remote site can access CP-101 by PSTN (or IP) in order to make a phone call to another IP (or PSTN) phone. CP-101 has dual switched Ethernet ports that enable IP sharing without compromising the voice quality during VoIP calls.
  • 128x64 Graphic LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Dual switched 10/100Base-T, RJ-45
  • Remote access FXO gateway function
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems

VoIP Phone (Bluetooth Extensible) CP-101B

Clipcomm CP-101B is a full-featured VoIP/PSTN dual mode phone that has RJ-11 port with 128x64 graphic LCD display. CP-101B’s RJ-11 port for PSTN connection can also operate as the remote-access FXO gateway. Thus, users even at a remote site can access the CP-101B by PSTN (or IP) in order to make a phone call to another IP (or PSTN) phone. CP-101B has dual switched Ethernet ports that enable IP sharing without compromising the voice quality during VoIP calls.
By inserting the Clipcomm's Bluetooth extension card into the CP-101B's extension slot, users can enjoy various Bluetooth services such as the LAN access point function based on LAN access / PAN Profile and wireless VoIP or PSTN gateway functions based on Cordless Telephony and Headset Profiles.
  • 128x64 Graphic LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Dual switched 10/100Base-T, RJ-45
  • Remote access FXO gateway function
  • Bluetooth Extension (additional Bluetooth CF card required)
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems


Web site (Korea):
http://www.clipcomm.co.kr/eng/e_product/e_product_voip_ip_phone.html


See Also


Where to Buy

  • VoIPSupply.comLargest VoIP-Specific VAR in North America - Enter Discount Code "WIKI5OFF" at checkout and receive a 5% discount Valid for all VoIP-INFO.org members!
  • PBXEQ.com VoIP solution made easy. Puchase asterisk hardware at great discounts - Worldwide Reseller



Clipcomm VOIP Phones

VoIP Phone (Low cost) CP-100

Clipcomm CP-100 is a standard-based telephone designed to use IP-PBX system with a low-cost. Since it is directly connected to the LAN or broadband modems, users can exploit the economical efficiency of VoIP. CP-100 supports essential VoIP phone functions.
  • 16x2 character LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Single 10/100 Base-T, RJ-45
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems

VoIP Phone (Dual Ethernet) CP-100D

Clipcomm CP-100D is a low-cost and standard-based business telephone that suits for using IP-PBX systems. It supports integrated NAT router function with its dual switched Ethernet ports, which enables the co-located PCs to share the Internet connection without compromising the voice quality during VoIP calls.
  • 16x2 character LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Dual switched 10/100Base-T, RJ-45
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems

VoIP Phone (PSTN Lifeline function) CP-100P

Clipcomm CP-100P is a useful endpoint device in case of failure in power supply, since its RJ-11 port for PSTN connection contains the PSTN lifeline function. It supports dual switched Ethernet ports that enable the co-located PCs to share the Internet connection without compromising the voice quality during VoIP calls.
  • 16x2 Character LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Dual switched 10/100Base-T, RJ-45
  • PSTN Lifeline function
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems

VoIP Phone (Wi-Fi Extensible) CP-100E

CP-100E has a unique wireless extensible feature that enlarges the range of application areas. Once an IEEE 802.11b CF card is inserted into CP-100E’s extension slot, it becomes either a WLAN ‘access point’ for nearby mobile terminals or WLAN ‘station’ that can be wirelessly connected to the Internet through nearby access points.
Clipcomm CP-100E supports dual switched Ethernet ports that enable the co-located PCs to share the Internet connection without compromising the voice quality during VoIP calls.
  • 16x2 Character LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Dual switched 10/100Base-T, RJ-45
  • IEEE 802.11b Extension for WALN AP or Station function (additional IEEE 802.b CF WLAN Card required
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems

VOIP Phone (PSTN/VoIP dual mode) CP-101

Clipcomm CP-101 is a full-featured VoIP/PSTN dual mode phone that has RJ-11 port with 128x64 graphic LCD display. Its RJ-11 port for PSTN connection can also operate as the remote-access FXO gateway. Thus, users even at a remote site can access CP-101 by PSTN (or IP) in order to make a phone call to another IP (or PSTN) phone. CP-101 has dual switched Ethernet ports that enable IP sharing without compromising the voice quality during VoIP calls.
  • 128x64 Graphic LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Dual switched 10/100Base-T, RJ-45
  • Remote access FXO gateway function
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems

VoIP Phone (Bluetooth Extensible) CP-101B

Clipcomm CP-101B is a full-featured VoIP/PSTN dual mode phone that has RJ-11 port with 128x64 graphic LCD display. CP-101B’s RJ-11 port for PSTN connection can also operate as the remote-access FXO gateway. Thus, users even at a remote site can access the CP-101B by PSTN (or IP) in order to make a phone call to another IP (or PSTN) phone. CP-101B has dual switched Ethernet ports that enable IP sharing without compromising the voice quality during VoIP calls.
By inserting the Clipcomm's Bluetooth extension card into the CP-101B's extension slot, users can enjoy various Bluetooth services such as the LAN access point function based on LAN access / PAN Profile and wireless VoIP or PSTN gateway functions based on Cordless Telephony and Headset Profiles.
  • 128x64 Graphic LCD
  • H.323 v4 / SIP (RFC3261)
  • G.711, G.723.1A, G.729AB
  • Dual switched 10/100Base-T, RJ-45
  • Remote access FXO gateway function
  • Bluetooth Extension (additional Bluetooth CF card required)
  • Network connection: Private lines/ ADSL modems using PPPoE/ Cable modems


Web site (Korea):
http://www.clipcomm.co.kr/eng/e_product/e_product_voip_ip_phone.html


See Also


Where to Buy

  • VoIPSupply.comLargest VoIP-Specific VAR in North America - Enter Discount Code "WIKI5OFF" at checkout and receive a 5% discount Valid for all VoIP-INFO.org members!
  • PBXEQ.com VoIP solution made easy. Puchase asterisk hardware at great discounts - Worldwide Reseller



Created by: JustRumours, Last modification: Tue 15 of Aug, 2006 (01:28 UTC) by pbxeq
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+