OpenSER And RTPProxy

This is a basic configuration file for Kamailio(OpenSER) to do VoIP NAT traversal using RTPProxy.

valid for OpenSER 1.1.x



#
# sample config file to be used with nathelper/rtpproxy
#
# start RTPProxy with: rtpproxy -l your_public_ip -s udp:localhost:8899
#

# ----------- global configuration parameters ------------------------

debug=3            # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no    # (cmd line: -E)

/* Uncomment these lines to enter debugging mode 
fork=no
log_stderror=yes
*/

check_via=no	# (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/openser_fifo"

# --- module loading

mpath="/usr/local/lib/openser/modules/"

loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "nathelper.so"
loadmodule "auth.so"
loadmodule "auth_db.so"

# --- setting module parameters

modparam("usrloc|auth_db","db_url","mysql://openser:openserrw@localhost/openser")

# -- usrloc params --
modparam("usrloc", "db_mode", 2)

# -- registrar params --
modparam("registrar", "nat_flag", 6)
modparam("registrar", "sip_natping_flag", 7)

# -- auth params --
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")

# -- rr params --
modparam("rr", "enable_full_lr", 1)

# -- nathelper
modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:7890")
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_from", "sip:pinger@openser.org")

# --- main routing logic
route{
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		exit;
	};
	if (msg:len >=  2048 ) {
		sl_send_reply("513", "Message too big");
		exit;
	};

	# NAT detection
	route(2);

	if (!method=="REGISTER")
		record_route();

	if (loose_route()) {
		append_hf("P-hint: rr-enforced\r\n"); 
		route(1);
	};

	if (!uri==myself) {
		append_hf("P-hint: outbound\r\n"); 
		route(1);
	};

	if (uri==myself) {
		if (method=="REGISTER") {
			if (!www_authorize("openser.org", "subscriber")) {
				www_challenge("openser.org", "0");
				exit;
			};

			if (isflagset(5)) {
				setflag(6);
				# if you want OPTIONS natpings uncomment next
				# setflag(7);
			};
			save("location");
			exit;
		};

		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			exit;
		};
		append_hf("P-hint: usrloc applied\r\n"); 
	};

	route(1);
}


route[1] {
	if (subst_uri('/(sip:.*);nat=yes/\1/')){
		setflag(6);
	};

	if (isflagset(5)||isflagset(6)) {
		route(3);
	}

	if (!t_relay()) {
		sl_reply_error();
	};
	exit;
}

route[2]{
	force_rport();
	if (nat_uac_test("19")) {
		if (method=="REGISTER") {
			fix_nated_register();
		} else {
			fix_nated_contact();
		};
		setflag(5);
	};
}

route[3] {
	if (is_method("BYE|CANCEL")) {
		unforce_rtp_proxy();
	} else if (is_method("INVITE")){
		force_rtp_proxy();
		t_on_failure("1");
	};
	if (isflagset(5))
		search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');
	t_on_reply("1");
}

failure_route[1] {
	if (isflagset(6) || isflagset(5)) {
		unforce_rtp_proxy();
	}
}

onreply_route[1] {
	if ((isflagset(5) || isflagset(6)) && status=~"(183)|(2[0-9][0-9])") {
		force_rtp_proxy();
	}
	search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');

	if (isflagset(6)) {
		fix_nated_contact();
	}
	exit;
}





See also:


This is a basic configuration file for Kamailio(OpenSER) to do VoIP NAT traversal using RTPProxy.

valid for OpenSER 1.1.x



#
# sample config file to be used with nathelper/rtpproxy
#
# start RTPProxy with: rtpproxy -l your_public_ip -s udp:localhost:8899
#

# ----------- global configuration parameters ------------------------

debug=3            # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no    # (cmd line: -E)

/* Uncomment these lines to enter debugging mode 
fork=no
log_stderror=yes
*/

check_via=no	# (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/openser_fifo"

# --- module loading

mpath="/usr/local/lib/openser/modules/"

loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "nathelper.so"
loadmodule "auth.so"
loadmodule "auth_db.so"

# --- setting module parameters

modparam("usrloc|auth_db","db_url","mysql://openser:openserrw@localhost/openser")

# -- usrloc params --
modparam("usrloc", "db_mode", 2)

# -- registrar params --
modparam("registrar", "nat_flag", 6)
modparam("registrar", "sip_natping_flag", 7)

# -- auth params --
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")

# -- rr params --
modparam("rr", "enable_full_lr", 1)

# -- nathelper
modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:7890")
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_from", "sip:pinger@openser.org")

# --- main routing logic
route{
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		exit;
	};
	if (msg:len >=  2048 ) {
		sl_send_reply("513", "Message too big");
		exit;
	};

	# NAT detection
	route(2);

	if (!method=="REGISTER")
		record_route();

	if (loose_route()) {
		append_hf("P-hint: rr-enforced\r\n"); 
		route(1);
	};

	if (!uri==myself) {
		append_hf("P-hint: outbound\r\n"); 
		route(1);
	};

	if (uri==myself) {
		if (method=="REGISTER") {
			if (!www_authorize("openser.org", "subscriber")) {
				www_challenge("openser.org", "0");
				exit;
			};

			if (isflagset(5)) {
				setflag(6);
				# if you want OPTIONS natpings uncomment next
				# setflag(7);
			};
			save("location");
			exit;
		};

		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			exit;
		};
		append_hf("P-hint: usrloc applied\r\n"); 
	};

	route(1);
}


route[1] {
	if (subst_uri('/(sip:.*);nat=yes/\1/')){
		setflag(6);
	};

	if (isflagset(5)||isflagset(6)) {
		route(3);
	}

	if (!t_relay()) {
		sl_reply_error();
	};
	exit;
}

route[2]{
	force_rport();
	if (nat_uac_test("19")) {
		if (method=="REGISTER") {
			fix_nated_register();
		} else {
			fix_nated_contact();
		};
		setflag(5);
	};
}

route[3] {
	if (is_method("BYE|CANCEL")) {
		unforce_rtp_proxy();
	} else if (is_method("INVITE")){
		force_rtp_proxy();
		t_on_failure("1");
	};
	if (isflagset(5))
		search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');
	t_on_reply("1");
}

failure_route[1] {
	if (isflagset(6) || isflagset(5)) {
		unforce_rtp_proxy();
	}
}

onreply_route[1] {
	if ((isflagset(5) || isflagset(6)) && status=~"(183)|(2[0-9][0-9])") {
		force_rtp_proxy();
	}
	search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');

	if (isflagset(6)) {
		fix_nated_contact();
	}
	exit;
}





See also:


Created by: openser, Last modification: Mon 03 of Aug, 2009 (11:42 UTC) by anomarme
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+