PLANET Case Studies
IP PBX System
- IP PBX Case Study 1 - IPX-2000_1800 Quick installing and connecting
- IP PBX Case Study 2 - IPX-2000_1800 Advanced installing and connecting
- IP PBX Case Study 3 - IPX-2000_1800 Single-Site configuration
- IP PBX Case Study 4 - IPX-2000_1800 Two-Site configuration
- IP PBX Case Study 5 - IPX-2000_1800 IP PBX with FXO gateway configuration
- IP PBX Case Study 6 - IPX-2000_1800 How to config Interactive Voice Response configuration
- IP PBX Case Study 7 - IPX-2000_1800 How to config Call Forward configuration
- IP PBX Case Study 8 - IPX-2000_1800 How to config Direct Inward Dialing configuration
- IP PBX Case Study 9 - IPX-2000_1800 How to config Trunk Balance configuration
- IP PBX Case Study 10 - IPX-2000_1800 How to config Worktime configuration
- IP PBX Case Study 11 - IPX-600 Two-Site configuration
- IP PBX Case Study 12 - IPX-600 with PABX via VIP-450FO configuration
- IP PBX Case Study 13 - IPX-600 with PABX via VIP-281 configuration
- IP PBX Case Study 14 - IPX-600 with VIP-281 for restricted PSTN calls configuration
- IP PBX Case Study 15 - IPX-300 Two-Site Configuration
- IP PBX Case Study 16 - IPX-2000_1800 Two-Site Configuration_II
- IP PBX Case Study 17 - IPX-300 series_ How to use Call Pick-up function
- IP PBX Case Study 18 - IPX-300 series_ How to use Record Voice Guide Process
- IP PBX Case Study 19 - IPX-300 series_ How to register your wired (wireless) Phone to IP PBX
- IP PBX Case Study 20 - IPX-300 series_ How to use wired (Wireless) phone to make off-Net calls via Gateway
- IP PBX Case Study 21 - IPX-300 series_ How to use wired (Wireless) phone to make external SIP calls via SIP Trunk
- IP PBX Case Study 22 - IPX-300 Series IP PBX with FXO gateway Configuration
- IP PBX Case Study 23 - IPX-2000v2 Two Site Configuration
- IP PBX Case Study 25 - How to restore IPX-300W back if can't be login anymore
- IP PBX Case Study 26 - IPX-300 Series with VIP-191 Install Procedure
- IP PBX Case Study 27 - How to Fdisk and Format USB Storage
- IP PBX Case Study 28 - IPX-1900_300_ PSTN incoming calls will redirect to extension or Auto Attendant at On_Off Duty time
- IP PBX Case Study 29 - IPX-1900 Single-Site Configuration
- IP PBX Case Study 29 - How to configure VIP-191 & VIP-550PT register to IPX-1900?
- IP PBX Case Study 30 - How to register VIP-255PT to IPX-300 via VPN tunnel
- IP PBX Case Study 31 - IPX-2000v2 SOP for the Stackable Management
- IP PBX Case Study 32 - IPX2000_1800 PBX with VIP-450 Configuration
- IP PBX Case Study 33 - IPX-1900_300 series_ Call Screen feature application
- IP PBX Case Study 36 - IPX-300 Series IP PBX with GSM_FXO gateway Configuration
- IP PBX Case Study 37 - IPX-1900_300 Series_Meet Room function
- IP PBX Case Study 38 - IPX-2000v1 with FXO gateway and Restrict PSTN calls to different ports
- IP PBX Case Study 39 - IPX-300 Series_IPX-1900 Site To Site Configuration
- IP PBX Case Study 40 - How to configure the PSTN connection between VIP-255PT, VIP-351PT, VIP-480, and IPX-1900?
- IP PBX Case Study 41 - How to use the IVR feature on IPX-1900
- IP PBX Case Study 42 - IPX-300 and VIP-254T with VPN Application
Note:the sample used in the case study is IPX-2000, this also can be applied to the IPX-1803/1804/1800N.
Note:the sample used in the case study is IPX-300, this also can be applied to the IPX-300W.
Voice Gateway System
- Gateway Case Study 1 - VIP-480 with VIP-155PT installing and connecting
- Gateway Case Study 2 - VIP-480 with VIP-x00 (H.323 series) T.38 compatibility configuration
- Gateway Case Study 3 - VIP-480 with VIP-000 installing and connecting
- Gateway Case Study 4 - VIP-480 with VIP-x50 (SIP series) T.38 compatibility configuration
- Gateway Case Study 5 - VIP-480 P2P configuration
- Gateway Case Study 6 - VIP-480 / VIP-450 P2P configuration
- Gateway Case Study 7 - VIP-480 Battery Reverse_Polarity Reverse Generation
- Gateway Case Study 8 - VIP-450 with P2P to PABX Configuration
- Gateway Case Study 9 - VIP-400 with P2P to PABX Configuration
- Gateway Case Study 10 - VIP-400 and VIP-280 P2P Configuration
- Gateway Case Study 11 - VIP-480 FAX by G.711 pass through Compatibility Configuration
- Gateway Case Study 12 - VIP-880 Upgrade procedure
- Gateway Case Study 13 - VIP-880 Busy Tone Learning
- Gateway Case Study 14 - VIP-880 FXO Ringer Voltage Threshold Ringer Voltage Filter Setting
- Gateway Case Study 15 - VIP-880 Answer Supervision
- Gateway Case Study 16 - VIP-880 FXO Answer Mode Setting
- Gateway Case Study 17 - VIP-880 P2P Configuration via FXO to FXO
- Gateway Case Study 18 - VIP-880 P2P Configuration via FXO to FXS
- Gateway Case Study 19 - VIP-880 P2P call for one shoot dialing (FXO to FXO)
- Gateway Case Study 20 - VIP-880 P2P Hotline setting
- Gateway Case Study 21 - VIP-480 SIP speed call setting
- Gateway Case Study 22 - VIP-400 with VIP-280 PLAR IN Configuration
- Gateway Case Study 23 - Voice Gateway FXO Debug Ring Voltage
- Gateway Case Study 24 - Voice Gateway ANI authentication and dialplan
- Gateway Case Study 25 - VIP-880 and VIP-157 P2P Configuration
- Gateway Case Study 26 - VIP-880_VIP-254_VIP-321 P2P Configuration
- Gateway Case Study 27 - VIP-480_VIP-281_VIP-350PT(VIP-550PT) P2P Configuration
- Gateway Case Study 30 - VIP-480 SIP Registration Configuration
- Gateway Case Study 32 - VIP-281GS and ATA P2P Configuration
- Gateway Case Study 33 - PSTN call busy forward to GSM Configuration
- Gateway Case Study 34 - VIP-2100_2400 with FXS Gateway Application
- Gateway Case Study 35 - VIP-2100_2400 with IPX-300_1900 Series Application
- Gateway Case Study 36 - IPX-300 Series IP PBX with GSM_FXO gateway Configuration
- Gateway Case Study 37 - IPX-1900_300 Series_ Meet Room function
- Gateway Case Study 38 - IPX-2000v1 with FXO gateway and Restrict PSTN calls to different ports
Note:the sample used in the case study is VIP-x80, this also can be applied to the VIP-281/880/1680/2480 series.
Note:the sample used in the case study is VIP-x50, this also can be applied to the VIP-450/450FS/450FO/050 series.
Note:the sample used in the case study is VIP-x00, this also can be applied to the VIP-400/400FS/400FO/000 series.
Analog Telephone Adapter
- ATA Case Study 1 - How to register your ATAs to SIP Proxy Server
- ATA Case Study 2 - VIP157 P2P Configuration
- ATA Case Study 3 - VIP156_157 series PhoneBook Configuration
- ATA Case Study 4 - VIP158 Auto-Provision Configuration
- ATA Case Study 5 - VIP-156_157 series Network settings via Keypad commands
- ATA Case Study 6 - VIP-156_157S P2P Configuration
- ATA Case Study 7 - How to register your ATAs to PLANET SIP Proxy Server (SIP-50)
- ATA Case Study 8 - How to register your ATAs to IPX-2000_1800 IP PBX system (Auto-config)
- ATA Case Study 9 - ATA series Call Forward Feature Example I~IV
- ATA Case Study 10 - VIP-157 Auto Answer Feature Example I~II
- ATA Case Study 11 - VIP-158 P2P_SIP Proxy Mode Configuration
- ATA Case Study 12 - How to register VIP-158 with IPX-300 Series
- ATAT Case Study 15 - How to configure VIP-161W-SW on P2P connection?
Note:the sample used in the case study is VIP-156/157, this also can be applied to the VIP-156PE/157S.
IP Phones
- Wi-Fi Phone Case Study 1 - How to register your VIP-191 to FWD SIP server
- Wi-Fi Phone Case Study 2 - How to register your VIP-191 to Easy call SIP Server
- IP Phones Case Study 3 - VIP-154 series SIP Server Install Procedure
- IP Phones Case Study 4 - VIP-154T P2P Configuration
- IP Phones Case Study 5 - How to register your VIP-154T to PLANET SIP Proxy Server (SIP-50)
- IP Phones Case Study 6 - How to register your VIP-154T to IPX-2000_1800 IP PBX system (Auto-config)
- IP Phones Case Study 7 - VIP-154T Call Forward Feature Example I~IV
- IP Phones Case Study 8 - VIP-154NT Auto Answer Feature Example I~II
- IP Phones Case Study 9 - VIP-154T series Keypad commands
- public sector training - VIP-154T series Keypad commands
- Wi-Fi Phone Case Study 10 - VIP-191 with WNRT610 Install Procedure
- IP Phone Case Study 11 - VIP350PT_550PT Upgrade procedure by Web Browser
- IP Phone Case Study 12 - VIP191_192 Wi-Fi Phone with Layer 2 Mash Install Procedure
- IP Phone Case Study 13 - VIP254 series SIP Server Install Procedure
- IP Phone Case Study 14 - VIP-192 with IPX-300_WAP4033 Installation configuration
- IP Phone Case Study 15 - VIP-100_101_150_152 Password Modification via Telnet
- IP Phone Case Study 16 - VIP-350PT_550PT registers to IPX-1900 and have SIP calls
- IP Phone Case Study 17 - ICF-1600 P2P Configuration
- IP Phone Case Study 18 - 3-Way Conference Configuration for VIP-255PT, VIP-155, and VIP-321 in P2P mode
- IP Phone Case Study 19 - 3-Way Conference Configuration for 3 x ICF-1600 in P2P mode
- IP Phone Case Study 20 - 3-Way Conference Configuration for ICF-1600, VIP-155PT, and VIP-321 in P2P mode
- IP Phone Case Study 21 - VIP-192 Firmware Upgrade Procedure
- IP Phone Case Study 22 - VIP-350PT_550PT registers to IPX-1900 and have SIP calls
- IP Phone Case Study 23 - VIP-190 register with IPX-2000 via WAP-4030 Procedure
- IP Phone Case Study 24 - How to register ICF-1600 to IP PBX Server
- IP Phone Case Study 25 - How to enable ICF-1600 Remote Management when under NAT Firewall
- IP Phone Case Study 26 - VIP-321 Call Forward_Transfer_Waiting_3-way Example
- IP Phone Case Study 28 - VIP-192 and VIP-254PT in P2P Configuration
- IP Phone Case Study 30 - VIP-321 P2P Configuration
- IP Phone Case Study 31 - VIP-321 SIP Proxy Configuration
- IP Phone Case Study 32 - VIP-193 How to entry the admin mode
- IP Phone Case Study 33 - How to change the backdrop logo for VIP-193?
- IP Phone Case Study 34 - How to setup the soft key for ICF-1600?
Note:the sample used in the case study is VIP-154T, this also can be applied to the VIP-154PT/154NT
Featured -
Search:

Page Changes















