Redfone - 750-5050

Business PBX Solutions
Provider Solution Details
Bicom VoIP Become an ITSP Now!
  • Become a serious competitor in VoIP Immediately
  • FULL Consultancy, Installation, Training & Support
  • Sell Hosted IP PBXs, Biz Lines, Call Centre
  • Turnkey Provisioning at your data center
Details
3CX Software PBX for Windows
  • Windows Software Solution
  • Easy to Install and Manage
  • Auto Configures Phones & Trunks
  • Android, iOS, Windows & Mac clients
Details
VoIP Hardware Solutions
Provider Solution Details
VoIP Hardware Zycoo UC Solutions
  • Modular Design IP PBX for SMB
  • Remote office Centralized Management solution
  • 3rd party app integration, Enterprise Billing, Android & iOS client
Details
Yeastar Communications Solutions
  • Cost-effective IP-PBX Solution for SMB
  • FXS, FXO, GSM, BRI and PRI VoIP Gateways
  • Rich features and reliable performance
Details
REDFONE FILED FOR BANKRUPTCY IN 2014 AND IS NO LONGER SELLING THEIR PRODUCTS.
Limited support for the redfone product is still available from www.telium.ca


Failover and HA Enabled High-Availability through rapid failover capabilities ensures your critical telephony services are always on and available
Flexible Configuration Configurable on a per-port basis, foneBRIDGE2 allows you to mix multiple telephony standards on a single deployment
Solid State Embedded Appliance No moving components. Low heat and power consumption ensures high MTBF (mean time before failure)
Field Upgradeable Our highly flexible and powerful FPGA architecture allows users to quickly upgrade units in the field when product enhancements and new features are released.

Simplifies Installation
  • True Plug & Play hardware
  • Simplifies cabling; place it wherever is most convenient
  • Leverages commodity servers; no need for a certified box
  • Eliminates requirement for proprietary T1/E1 cards
  • Ethernet only requirement. No need to worry about having the correct PCI, PCI-X, PCIe slot!

Fully Asterisk Compatible
  • Employs native Asterisk™ TDMoE format and utilities
  • Follows standard Asterisk™ configuration rules and syntax
  • Compatible with PRI, channel banks and legacy PBX systems

TARGET APPLICATIONS
  • T1/E1 PRI Trunk termination
  • Legacy PBX-to-Asterisk integration
  • High-Availability/Failover Asterisk clusters
  • Channel Bank connectivity
  • Mixed telephony environments ( E1 PRIs + T1 Channel Banks)
  • Perfect for BLADE servers where PCI slots are not available.
  • Asterisk, Elastix and trixbox Supported

TELEPHONY STANDARDS
  • PRI Switch Compatibility– EuroISDN, AT&T 4ESS, DMS100, Lucent 5E, NI1/NI2; Network or CPE
  • Line Interface– Single, Dual or Quad T1/E1 (RJ45), per port configurable
  • Line Encoding– AMI/B8ZS for T1, AMI/HDB3 for E1
  • Super Frame (SF) and Extended Super Frame (ESF)
  • Robbed Bit Signaling (RBS/CAS)
  • MFC/R2 Support when combined with 3rd party software

WARRANTY
  • 30 day no questions asked money back guarantee. 3 years parts and labor

See also

REDFONE FILED FOR BANKRUPTCY IN 2014 AND IS NO LONGER SELLING THEIR PRODUCTS.
Limited support for the redfone product is still available from www.telium.ca


Failover and HA Enabled High-Availability through rapid failover capabilities ensures your critical telephony services are always on and available
Flexible Configuration Configurable on a per-port basis, foneBRIDGE2 allows you to mix multiple telephony standards on a single deployment
Solid State Embedded Appliance No moving components. Low heat and power consumption ensures high MTBF (mean time before failure)
Field Upgradeable Our highly flexible and powerful FPGA architecture allows users to quickly upgrade units in the field when product enhancements and new features are released.

Simplifies Installation
  • True Plug & Play hardware
  • Simplifies cabling; place it wherever is most convenient
  • Leverages commodity servers; no need for a certified box
  • Eliminates requirement for proprietary T1/E1 cards
  • Ethernet only requirement. No need to worry about having the correct PCI, PCI-X, PCIe slot!

Fully Asterisk Compatible
  • Employs native Asterisk™ TDMoE format and utilities
  • Follows standard Asterisk™ configuration rules and syntax
  • Compatible with PRI, channel banks and legacy PBX systems

TARGET APPLICATIONS
  • T1/E1 PRI Trunk termination
  • Legacy PBX-to-Asterisk integration
  • High-Availability/Failover Asterisk clusters
  • Channel Bank connectivity
  • Mixed telephony environments ( E1 PRIs + T1 Channel Banks)
  • Perfect for BLADE servers where PCI slots are not available.
  • Asterisk, Elastix and trixbox Supported

TELEPHONY STANDARDS
  • PRI Switch Compatibility– EuroISDN, AT&T 4ESS, DMS100, Lucent 5E, NI1/NI2; Network or CPE
  • Line Interface– Single, Dual or Quad T1/E1 (RJ45), per port configurable
  • Line Encoding– AMI/B8ZS for T1, AMI/HDB3 for E1
  • Super Frame (SF) and Extended Super Frame (ESF)
  • Robbed Bit Signaling (RBS/CAS)
  • MFC/R2 Support when combined with 3rd party software

WARRANTY
  • 30 day no questions asked money back guarantee. 3 years parts and labor

See also

Created by: swast, Last modification: Sat 23 of May, 2015 (13:40 UTC) by telium
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+