Redfone - 750-5050-ECSINGLE

Business PBX Solutions
Provider Solution Details
Bicom VoIP Become an ITSP Now!
  • Become a serious competitor in VoIP Immediately
  • FULL Consultancy, Installation, Training & Support
  • Sell Hosted IP PBXs, Biz Lines, Call Centre
  • Turnkey Provisioning at your data center
Details
3CX Software PBX for Windows
  • Windows Software Solution
  • Easy to Install and Manage
  • Auto Configures Phones & Trunks
  • Android, iOS, Windows & Mac clients
Details
VoIP Hardware Solutions
Provider Solution Details
VoIP Hardware Zycoo UC Solutions
  • Modular Design IP PBX for SMB
  • Remote office Centralized Management solution
  • 3rd party app integration, Enterprise Billing, Android & iOS client
Details
Yeastar Communications Solutions
  • Cost-effective IP-PBX Solution for SMB
  • FXS, FXO, GSM, BRI and PRI VoIP Gateways
  • Rich features and reliable performance
Details
Obtaining a reliable, fault tolerant, highly available system with ASTERISK® has been difficult and nearly impossible especially from the PRI/TDM standpoint. IP based toolsets have been around for a number of years to allow integrators the ability to provide fault-tolerance on the VoIP side of their implementation. Until today however, providing quick, reliable and robust T1/E1 fail-over has been nearly non-existent. The foneBRIDGE fills this void allowing IT Managers and Systems Integrators to implement Asterisk in the most demanding of environments where downtime is a luxury a business simply can not afford.

Key Product Features
  • 1 T1/E1 PRI Trunk Termination Ports
  • Legacy PBX-to-Asterisk integration
  • High-Availability/Failover Asterisk Clusters
  • Channel Bank connectivity
  • Mixed telephony enviroments (E1 PRI's + T1 Channel Banks)
  • Perfect for BLADE servers where PCI slots are not available.
  • Asterisk and Trixbox Supported

Product Benefits
  • Failover and HA Enabled
  • High-Availability through rapid failover capabilities ensures your critical telephony services are always on and available
  • Flexible Configuration
  • Configurable on a per-port basis, foneBRIDGE2 allows you to mix multiple telephony standards on a single deployment
  • Solid State Embedded Appliance
  • No moving components. Low heat and power consumption ensures high MTBF (mean time before failure)

Field Upgradeable
  • Our highly flexible and powerful FPGA architecture allows users to quickly upgrade units in the field when product enhancements and new features are released.

Simplifies Installation
  • True Plug & Play hardware
  • Simplifies cabling; place it wherever is most convenient
  • Leverages commodity servers; no need for a certified box
  • Eliminates requirment for proprietary T1/E1 cards
  • Ethernet only requirment. No need to worry about having the correct PCI, PCI-X, PCIe slot!

Fully Asterisk Compatible
  • Employs native Asterisk TDMoE format and utilities
  • Follows standard Asterisk configuration rules and syntax
  • Compatible with PRI, channel banks and legacy PBX systems

TELEPHONY STANDARDS
  • PRI Switch Compatibility– EuroISDN, AT&T 4ESS, DMS 100, Lucent 5E, NI1/NI2; Network or CPE
  • Line Interface– Dual or Quad T1/E1 (RJ45), per port configurable
  • Line Encoding– AMI/B8ZS for T1, AMI/HDB3 for E1
  • Super Frame (SF) and Extended Super Frame (ESF)
  • Robbed Bit Signaling (RBS/CAS)

See also

Obtaining a reliable, fault tolerant, highly available system with ASTERISK® has been difficult and nearly impossible especially from the PRI/TDM standpoint. IP based toolsets have been around for a number of years to allow integrators the ability to provide fault-tolerance on the VoIP side of their implementation. Until today however, providing quick, reliable and robust T1/E1 fail-over has been nearly non-existent. The foneBRIDGE fills this void allowing IT Managers and Systems Integrators to implement Asterisk in the most demanding of environments where downtime is a luxury a business simply can not afford.

Key Product Features
  • 1 T1/E1 PRI Trunk Termination Ports
  • Legacy PBX-to-Asterisk integration
  • High-Availability/Failover Asterisk Clusters
  • Channel Bank connectivity
  • Mixed telephony enviroments (E1 PRI's + T1 Channel Banks)
  • Perfect for BLADE servers where PCI slots are not available.
  • Asterisk and Trixbox Supported

Product Benefits
  • Failover and HA Enabled
  • High-Availability through rapid failover capabilities ensures your critical telephony services are always on and available
  • Flexible Configuration
  • Configurable on a per-port basis, foneBRIDGE2 allows you to mix multiple telephony standards on a single deployment
  • Solid State Embedded Appliance
  • No moving components. Low heat and power consumption ensures high MTBF (mean time before failure)

Field Upgradeable
  • Our highly flexible and powerful FPGA architecture allows users to quickly upgrade units in the field when product enhancements and new features are released.

Simplifies Installation
  • True Plug & Play hardware
  • Simplifies cabling; place it wherever is most convenient
  • Leverages commodity servers; no need for a certified box
  • Eliminates requirment for proprietary T1/E1 cards
  • Ethernet only requirment. No need to worry about having the correct PCI, PCI-X, PCIe slot!

Fully Asterisk Compatible
  • Employs native Asterisk TDMoE format and utilities
  • Follows standard Asterisk configuration rules and syntax
  • Compatible with PRI, channel banks and legacy PBX systems

TELEPHONY STANDARDS
  • PRI Switch Compatibility– EuroISDN, AT&T 4ESS, DMS 100, Lucent 5E, NI1/NI2; Network or CPE
  • Line Interface– Dual or Quad T1/E1 (RJ45), per port configurable
  • Line Encoding– AMI/B8ZS for T1, AMI/HDB3 for E1
  • Super Frame (SF) and Extended Super Frame (ESF)
  • Robbed Bit Signaling (RBS/CAS)

See also

Created by: swast, Last modification: Wed 15 of Feb, 2012 (03:37 UTC) by admin
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+