Telus PRI setup details

Business PBX Solutions
Provider Solution Details
Bicom VoIP Become an ITSP Now!
  • Become a serious competitor in VoIP Immediately
  • FULL Consultancy, Installation, Training & Support
  • Sell Hosted IP PBXs, Biz Lines, Call Centre
  • Turnkey Provisioning at your data center
Details
3CX Software PBX for Windows
  • Windows Software Solution
  • Easy to Install and Manage
  • Auto Configures Phones & Trunks
  • Android, iOS, Windows & Mac clients
Details
VoIP Hardware Solutions
Provider Solution Details
VoIP Hardware Zycoo UC Solutions
  • Modular Design IP PBX for SMB
  • Remote office Centralized Management solution
  • 3rd party app integration, Enterprise Billing, Android & iOS client
Details
Yeastar Communications Solutions
  • Cost-effective IP-PBX Solution for SMB
  • FXS, FXO, GSM, BRI and PRI VoIP Gateways
  • Rich features and reliable performance
Details
This page is to collect information on setting up Telus PRIs with Asterisk. We found their provisioning department to be very knowledgeable and ready to help

Using a Sangoma A101 and Echo Canceller with Asterisk 1.4

/etc/zaptel.conf

loadzone=us
defaultzone=us
#Sangoma A101 port 1 [slot:4 bus:3 span:1] <wanpipe1>
span=1,1,0,esf,b8zs
bchan=1-23
hardhdlc=24


/etc/asterisk/zapata.conf
[trunkgroups]
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no

;Sangoma A101 port 1 [slot:4 bus:3 span:1] <wanpipe1>
;You may want to confirm with Telus that your PRI is connected to a Nortel DMS100. "national" may also work.
switchtype=dms100
context=from-pstn
group=0
signalling=pri_cpe

channel =>1-23


/etc/asterisk/wanpipe/wanpipe1.conf
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec 6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 3
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = MASTER
TE_REF_CLOCK = 0

TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 24
TDMV_HW_DTMF = NO
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES



This page is to collect information on setting up Telus PRIs with Asterisk. We found their provisioning department to be very knowledgeable and ready to help

Using a Sangoma A101 and Echo Canceller with Asterisk 1.4

/etc/zaptel.conf

loadzone=us
defaultzone=us
#Sangoma A101 port 1 [slot:4 bus:3 span:1] <wanpipe1>
span=1,1,0,esf,b8zs
bchan=1-23
hardhdlc=24


/etc/asterisk/zapata.conf
[trunkgroups]
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no

;Sangoma A101 port 1 [slot:4 bus:3 span:1] <wanpipe1>
;You may want to confirm with Telus that your PRI is connected to a Nortel DMS100. "national" may also work.
switchtype=dms100
context=from-pstn
group=0
signalling=pri_cpe

channel =>1-23


/etc/asterisk/wanpipe/wanpipe1.conf
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec 6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 3
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = MASTER
TE_REF_CLOCK = 0

TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 24
TDMV_HW_DTMF = NO
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES



Created by: alephcom, Last modification: Wed 04 of Mar, 2009 (21:03 UTC)
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+