login | register
Sun 12 of Oct, 2008 [17:47 UTC]

voip-info.org

History

ZULTY 4x5 Config

Created by: tmp,Last modification on Fri 09 of Dec, 2005 [23:41 UTC]
The following are example config files from a working phone attached to an asterisk server .....

These settings above should be store in a file called MAC-ADDRESS.cfg on your tftp server


HW_CONFIG
LCD_CONTRAST=7
RING_VOLUME=10
SPEAKER_VOLUME=10
HEADSET_VOLUME=10
HANDSET_VOLUME=10
SPEAKER_MIC_GAIN=9
HEADSET_MIC_GAIN=0
HANDSET_MIC_GAIN=6
SIGNAL_CORRECTION=Yes

VLAN_CONFIG
MODE=1
VLAN_ID_A=1
CIRCUITS_A=UEEEU
COS_SETTING=5

FW
MODE=0

DHCP_SRV

EMERGENCY_NUMBERS

BT

RECO

NET_CONFIG
USE_DHCP=Yes
IP_ADDR=*** IP ADDRESS OF PHONE ***
SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=*** YOUR DEFAULT GATEWAY
HOST_NAME=
DOMAIN=*** YOUR DOMAIN ***
PRIMARY_DNS=*** DNS SERVER ADDRESS ***
SECONDARY_DNS=
SNTP_SERVER_ADDR=*** ASTERISK SERVER ADDRESS ***
TFTP_SERVER_ADDR=*** TFTP SERVER ADDRESS ***
TFTP_ADDR_FIXED=Yes
TFTP_CFG_DIR=/
DSCP_SETTING=0
PREV_IP=*** IP ADDRESS OF THE PHONE ***
STUN_SERVER=
STUN_SERVER_PORT=3478
STUN_SIP_BINDING=0
STUN_RTP_BINDING=0

SIP_CONFIG
PHONE_SIP_PORT=5060
RTP_START_PORT=33000
DEVICE_ID=203
DISPLAY_NAME=
REGISTER_W_PROXY=Yes
PROXY_ADDR=*** ASTERISK SERVER ADDRESS ***
PROXY_PORT=5060
REGISTRAR_ADDR=*** ASTERISK SERVER ADDRESS ***
REGISTRAR_PORT=5060
REGISTRATION_EXPIRES=3600
BACKUP_REG_EXPIRES=3600
SESSION_EXPIRES=1800
SUBSCRIPTION_EXPIRES=3600
CALL_PARK_EXTENSION=*7
PAGE_EXTENSION=*4
FWD_CONDITION=0
FWD_ADDRESS=
FWD_NO_ANSW_TIMEOUT=15000
MUTE_STATUS=No
DND_STATUS=No
ENCRYPTION=1
PAGE_SERVER_ADDR=
PAGE_MODE=0
BACKUP_PROXY_ADDR=
BACKUP_PROXY_PORT=5060
REGISTER_W_BACKUP_PROXY=No
SIP_INVITE_RETRANS=6
SIP_NON_INVITE_RETRANS=10
AUTH_PASSWORD=*** SIP REGISTRATION PASSWORD ***
INB_IM_ENABLED=Yes
FXO_MODE=0
GATEWAY_EXT=
VALIDATE_SIP_MSG=No
USE_DNS_SRV=No
SIP_DOMAIN=

AUDIO_INFO
EXT_RING_TONE=0
EXT_CUST_RING=
INT_RING_TONE=0
INT_CUST_RING=
FXO_RING_TONE=0
FXO_CUST_RING=
RING_TONE2=0
CUST_RING2=
KEY_CLICK=0
HOLD_TONE=0
INT_CALL_ANSWER=0
EXT_CALL_ANSWER=0
INT_CALL_DISCONNECT=0
HOOK_BY_SPK_BTN=No
DEFAULT_PAGE_GROUP=
CODEC=0
DISTINCTIVE_RING=Yes
ACCEPT_URL=No
SOUND_URL=http://www.zultys.com/phone_sounds/
ENABLE_HEADSET_AEC=Yes
STUTTER_TONE=No
MAX_JITTER=20
JB_MODE=1

GENERAL_INFO
GREETING_MESSAGE=HELLO USER
PASSWORD=985897
TIME_FMT=NaVM
DATE_FMT=%a %d %b %y
DATE_TIME_ORDER=0
TIMEZONE= +0
LANGUAGE=en_US.iso88591
DELMTR=._
CLEAR_SETTINGS=0
DEBUG_SOCKETS=No
UTM=No
DEBUG_AUDIO=No
SEL_LOCATION=
DISPLAY_EVENTS=2
DIGITS_TIMEOUT=3
COUNTRY=UK

ADDRESS_BOOK
NAME00=Voice mail
NUMBER00=*97





next you will need the following file and call it ZIP4x5_common.cfg


HW_CONFIG
lcd_contrast=7
ring_volume=10
speaker_volume=10
headset_volume=10
handset_volume=10

VLAN_CONFIG
mode=1
cos_setting=5
vlan_id_a=1
circuits_a=TEEEU


NET_CONFIG
use_dhcp=yes
default_gateway=192.168.0.1
domain=
dscp_setting=63
ip_addr=192.168.0.20
sntp_server_addr=192.168.0.1
primary_dns=192.168.0.2
secondary_dns=192.168.0.1
subnet_mask=255.255.255.0
tftp_cfg_dir=./
tftp_addr_fixed=yes
tftp_server_addr=*** YOUR tftp server address ***
stun_server=
stun_server_port=3478
stun_sip_binding=0
stun_rtp_binding=0

FW
mode=1
wan_vid=1
lan_vid=2
wan_ip=1.1.1.1
wan_mask=255.255.255.255

;PPPoE
pppoe_mode=0
pppoe_idle_timeout=
pppoe_user=PPPoE
pppoe_pwd=1234

;FW/NAT
lan_filters=
wan_filters=junk#udp#172.16.17.1#64#1

;Routes
static_routes=

;VPN
ipsec_log=1
ipsec_mode=0
remote_lan_net=172.16.0.0/16
remote_wan_ip=180.1.0.50
p1_encrypt_algo=rijndael
p1_hash_algo=sha1
p1_mode=aggressive
psk=JUNK
pf_secrecy=0
key_lifetime=1 hour
encrypt_algo=3des
auth_algo=hmac_md5
encrypt_key=0x00
authkey=0x00
inbound_spi=0x00
outbound_spi=0x00
my_ident=user_fqdn "Last104@SQALab.com"

DHCP_SRV
mode=0
start_ip=172.16.17.0
end_ip=172.16.31.254
o_mask=255.255.240.0
lease_secs=300
o_router=172.16.16.66
o_dns1=
o_dns2=
o_dns3=
o_domain=x.com
o_ntp1=180.1.0.50
o_ntp2=
o_ntp3=
o_tftp=

BT

SIP_CONFIG
max_jitter=20
fxo_mode=2
inb_im_enabled=true
rtp_start_port=20000
register_w_proxy=yes
call_park_extension=77
encryption=0
phone_sip_port=5060
device_id=ZIP5_4
page_server_addr=172.16.0.51
page_extension=9
proxy_addr=172.16.0.50
proxy_port=5060
registrar_addr=172.16.0.50
registrar_port=5060
registration_expires=3600
rtp_start_port=64500
sip_invite_retrans=6
sip_non_invite_retrans=10
subscription_expires=3600
voice_mail_uri=8
auth_password=zultys
;backup_proxy_addr=172.16.11.66
;backup_proxy_port=5060
;backup_reg_expires=3600
;register_w_backup_proxy=no

AUDIO_INFO
int_call_answer=0
codec=0
ext_cust_ring=Grinch.wav
ext_ring_tone=0
int_cust_ring=DrWho2.wav
int_ring_tone=0
cust_ring2=ST_WhatWant_Picard.wav
hold_tone=0
ring_tone2=0
key_click=1
distinctive_ring=yes
accept_url=yes
sound_url=http://10.1.72.90/

GENERAL_INFO
debug_sockets=yes
clear_settings=2
country=USA
display_events=3
greeting_message=Last104
password=1234
time_fmt=NaVM:NaVm/NaVy
timezone=-480
date_time_order=0
language=ENGLISH
delmtr=.,
software_version=




Comments

Comments Filter
222

333VPN for VoIP Blocking

by jenniferhan, Wednesday 12 of December, 2007 [06:18:26 UTC]
Somebody use VPN to solve the VoIP Blocking issue. But it seems not a good way to solve the voip blocking issue. Because VPN will take more bandwidth and will take effection on the Voice Quality

Currently I am using the VGCP, a new solution to solve the VoIP Blocking issue. Following is theirs website:
http://www.speed-voip.com/index-36.html

If any of you have interested, you may try to use it to solve your VoIP Blocking problems. Thanks.

Andy
andywong-01@hotmail.com