Version 4
- Current v4 Development via SourceForge http://sourceforge.net/projects/chan-sccp-b/ concentrating on asterisk 1.6.2, 1.8.x, 1.10.x and above integration.
- Mailing list https://lists.sourceforge.net/lists/listinfo/chan-sccp-b-discussion
Version 3
- We have issued V3.1.3 stable for all versions up to 1.6.2, you can check it out over here: http://sourceforge.net/projects/chan-sccp-b/.
- Mailing list https://lists.sourceforge.net/lists/listinfo/chan-sccp-b-discussion
Version 2
In version 1 I can’t add support of application, headset, messages and directory buttons – because I have no idea how to get type codes of these buttons. Also, I have no CCM for research. But I find a message in chan-sccp-b-discussion email Archive, where Jasper Siepkes tells how to hacking chan_sccp to add this functionality and problems which he has with modified sources compiling. I modify my path for chan-sccp-b-20071213 release for adding support headset, application, directory, messages buttons. New path
chan_sccp-20071213-mod-cp7931-2.patch
In sccp.conf you need to add empty speed dials in 24, 23, 22 and 21 positions.
Modification details
When I find the message, I can’t download Jasper’s path – sf.net tell me about error (now this problem is fixed) Therefore my modifications are a little different. Also, I fix the problem with BUTTONTYPE constants in chan_sccp. SKINNY_BUTTONTYPE_MULTI, SCCP_BUTTONTYPE_LINE, SCCP_BUTTONTYPE_SPEEDDIAL, SCCP_BUTTONTYPE_HINT is made only for internal use in chan_sccp implementation. So I change their values from 0xc0-0xc3 range to 0xe0-0xe3. Modified chan-sccp-b work with asterisk 1.2
Thank Jasper Siepkes
Version 1
I have a Cisco 7931 IP phone and trying to connect them with Asterisk. Unfortunately, there is no support for this device in chan_sccp. Maximum, that I could make – it uses line for register device and making/receiving calls. I can’t set speedials buttons, monitoring lines state… In hope to find the decision of a problem I was search internet resources. But I have found only the same problems as other people and any decision. Therefore I have decided to add support of Cisco 7931 in chan_sccp.
There are step-by-step instructions:
- download chan_sccp sources from http://sourceforge.net/projects/chan-sccp-b/ I’m using chan-sccp-b-20071213 release
- extract sources in folder
- add CP7931 support – download and apply patch chan_sccp-20071213-mod-cp7931.patch
- compile chan_sccp
- install new chan_sccp on Asterisk
- configure: edit sccp.conf and extention.conf
- in CLI run “unload chan_sccp.so” and “load chan_sccp.so” (reload seems does not really reload sccp.conf), and reload all configuration by running “reload”
sccp.conf
[devices]
type = 7931 ;device type (see below)
autologin = <Line-number-here> ;lines list. You can add an empty line for an empty button (7960, 7970, 7940, 7920)
description = <Description-here> ;internal description. Not important
keepalive = 60 ;set 0 to disable the keepalive check.
tzoffset = +1
transfer = on ;enable or disable the transfer capability. It does remove the transfer softkey
park = on
; Up to 23 speeddials here
speeddial = ; Enpty - not assign button
speeddial = <Extention>,<Name>,<Hint> ; Extention - speeddial extention, Name - name, that will be on phone display, Hint - Hint-extenntion i'm use spetial context for hints
;...
speeddial = 10000,John Smith,10000@hint-context ; Example speeddial
cfwdall = on ;activate the callforward stuff and softkeys
cfwdbusy = on
dtmfmode = outofband ;inband or outofband. outofband is the native cisco dtmf tone play. Some phone model does not play dtmf tones while connected (bug?), so the default is inband
imageversion = SCCP31.8-3-1S ;useful to upgrade old firmwares (the ones that do not load *.xml from the tftp server)
dnd = on ;turn on the dnd softkey for this device. Valid values are "off", "on" (busy signal), "reject" (busy signal)
trustphoneip = no ;The phone has a ip address. It could be private, so if the phone is behind NAT we don't have to trust the phone ip address, but the ip address of the connection. The audio strem will be open in the progress and connected state.
private = on ;permit the private function softkey for this device
mwilamp = on ;Set the MWI lamp style when MWI active to on, off, wink, flash or blink
mwioncall = on ;Set the MWI on call.
device => SEP<MAC-address-here> ;device name SEP
[lines]
id = <Id-here> ;future use, I'm use line number
pin = <Line-number-here> ;future use
label = <Line-label-here> ;button line label (7960, 7970, 7940, 7920) and now 7931 I'm use line number
description = <Phone-deskr-here> ;top diplay description
context = internal
incominglimit = 2 ;more than 1 incoming call = call waiting.
transfer = on ;per line transfer capability. on, off, 1, 0
mailbox = 2 ;voicemail.conf (syntax: vmbox[@context][:folder])
vmnum = *97 ;speeddial for voicemail administration, just a number to dial
cid_name = <Caller-id-here> ;caller id name
cid_num = <Line-Number-here>
secondary_dialtone_digits = 9 ;digits for the secondary dialtone (max 9 digits)
secondary_dialtone_tone = 0x22 ;outside dialtone
music ;Sets the default music on hold class
language=en ;Default language setting
rtptos = 184 ;sets the the rtp packets TOS for this line
echocancel = on ;sets the phone echocancel for this line
silencesuppression = on ;sets the silence suppression for this line
callgroup=1 ;We are in caller groups 1,3,4. Valid for this line
pickupgroup=1 ;We can do call pick-p for call group 1,3,4,5. Valid for this line
line => <Line-Number-here> ;Line numberextentions.conf
; waching line statuses
[hints-context]
;Unfortunately something similar this not worked
;exten => _X.,hint,SIP/${EXTEN}
;- it is necessary to specify all extentions we need to waching
exten => <Extention-Here>,hint,SCCP/<Extention-Here>
exten => <Extention-Here>,hint,SIP/<Extention-Here>
;...
exten => 10000,hint,SIP/10000
April 7, 2023
Phone System 