Analog Telephone Adapters

Important notice to product manufacturers, resellers and other people adding to this page

• If you want to add your company’s products, please read the Posting Guidelines for Promoting Products and Services
• The lists shall be in alphabetical order; out-of-order entries will be removed with the presumption that they are intended as unethical marketing tricks.

Analogue Terminal Adapters (ATAs)

Please make sure you put entries into the correct category.

This Wiki is frequently visited by newbies who have never before done anything with telephony. Entries in the wrong category can lead to confusion. So, please refrain from marketing tricks getting your product listed as many times as possible. If some newbie buys your stuff only to find out it doesn’t work the way it was expected and it won’t work with his hardware or operating system it can only do harm. Adapters with an ethernet port go into category “FXS to Ethernet”. Adapters with a USB connector go into category “FXS to USB”. Further, in order to maintain fairness between all vendors and manufacturers do not use boldface or larger font to make your entry stand out and use only a single line for each product. If you want to provide a description longer than a single line, create a new Wiki page for your entry and point the entry to that Wiki. For more information on how to create a new Wiki page see How to add information to this wiki. If you’re just rebranding some else’s ATA, please post somewhere else. Your cooperation is very much appreciated.

Analogue Phone to Ethernet gateways (FXS only – for devices with FXO ports see: VoIP Gateways)

The most common analogue terminal adapter is a device with at least one telephone jack (FXS port) used to connect a conventional telephone and an ethernet jack used to connect the adapter to the LAN. Using such an ATA it is possible to connect a conventional telephone to a remote VoIP server. The ATA communicates with the remote VoIP server using a VoIP protocol such as H.323, SIP, MGCP or IAX and encodes and decodes the voice signal using a voice codec such as ulaw, alaw, gsm, ILBC and others. Since ATAs communicate directly with a VoIP server, they do not require any software to be run on a personal computer, such as a softphone.

• Allwin Tech SIP/H.323 dual protocols, 2/4/8 FXS ports with or without PSTN backup, NAT, Router, register up to 4 servers simultaneously
• analogue adapter. Linksys : soho analogue Telephone VoIP Adapter soho-voip-phone is your one-stop shop for all kinds of Analog Adapters accessories like adapters and more]
• Anketechnology: VoicePixie-110 VoicePixie-210 VoicePixie-220 VoicePixie-211: Sip, 1,2 ports adapter www.anketechnology.com
• Aricent Edge Gateway Toolkit (EGT) – EGT acts as a key building block for SIP based residential to low port density Customer Premise Equipment (CPE), Edge Gateway (SMBs and Enterprise) terminals and passive optical network (PON) based optical network terminals (ONT). For more info please visit: http://www.aricent.com
• Atcom: AG-168V AG-268 AG-468: 1,2,4 ports ATA,IAX support
• AudioCodes MP-202 ATA 2 FXS/FXO, supports SIP & MGCP
• Azatel: 2 port FXS, 1 WAN, 1 LAN, 1 PSTN Backup Port, NAT, Router, 3 way calling SIP MGCP – see also Ginza Design and SIP Express
• BATM/Telco Systems AC-211: 2 FXS, 1 Ethernet WAN, 1 LAN, NAT Router, 1 PSTN. Supports H.323, SIP and MGCP
• BATM/Telco Systems GW-232: 2 FXS, 1 Ethernet WAN (fiber or copper), 3 LAN, 1 PSTN. Supports of H.323, SIP, and MGCP
• Bcomtel ATA: 1,2 ,4 ,8 SIP,IAX2 T.38,VPN Autoprovision,Router, FXS ,FXO ,Transfer ,conference, WiFi ATA
• BM8010 1 FXS 1 Lifeline 1 WAN 1 LAN port ,support T.38 fax, 2 sip and 1 iax2
• BM8028 2 FXS 1 Lifeline 1 WAN 3 LAN port ,support T.38 fax, 2 sip
• BM8041 4 FXS 1 WAN 1 LAN port ,support T.38 fax, 2 sip
• BeWAN Systems: PhoneBox :1 FXS+1 FXO,1 WAN,1 LAN support SIP
• BroadTel UPA-1: A USB Phone adapter connecting corded phone to laptop/PC, supporting SIP. Plz contact [email protected] for OEM/ODM
• Clipcomm ATA and Gateways several models
• Cisco ATA 18x Analog IP Adaptor
• Cisco ATA 186 SIP firmware Cisco ATA 186 SIP and Asterisk – HowTo
• Cisco ATA 186 With MGCP Firmware [https://www.voip-info.org/wiki/index.php?page=Cisco ATA+186+MGCP+and+Asterisk+(HowTo) Cisco ATA 186 MGCP and Asterisk (HowTo)
• Digium IAXy 1 port FXS, IAX protocol
• G-Tek AQ-100X: Desktop VoIP SIP Phone with PoE (QoS, G.729a/b, G.726, G.723.1) for more information please contact, [email protected]
• GlobetelX IAD-100X: Full-Featured Single Port IAX2 VoIP IAD (NAT Router, QoS, G.729a/b, G.726, G.723.1)
• GlobetelX IAD-200X: Full-Featured Dual Port IAX2 VoIP IAD (NAT Router, QoS, G.729a/b, G.726, G.723.1)
• Goldenfuture: (GW102) : 1 ports with lifeline ATA,IAX support http://www.goldenfuture.com.cn
• Grand Digital Information Ltd. $28 USD for 100K units GIX100, GIX1011 prot ATA with router function
• Grandstream HandyTone 286, HandyTone 386, HandyTone 486, HandyTone 488 and HandyTone 496: SIP ATA
• HouTel voip gateways with T.I chips—SIP supported—
• iaxTalk – 1 port FXS, IAX2 protocol supported. 4 ports FXS gateway with Fax supported.
• IndustryDynamics. SkyPBX Skype-PBX bridge with 4 FXS ports, concurrent Skype calling and free line detection. More info.
• IP-Ware S.L. 1,2,4,8 FXS/FXO ports Gateways, Perfect for VoIP Providers.
• IP-Ware S.L. IAX Gateway For Asterisk Users.
• Leadtek Research Inc. 1 port, 2 port, and combined router models
• Linksys PAP2 phone adapter with 2 FXS ports
• magicJack
• magicJack Plus
• Mediatrix Multiple port VOIP gateways
• Micronet 1 to 4 FXS port models
• Moimstone VoIP TA – IPv6/IPv4 support, 2 RJ-45 Ports & 1 RJ-11 Port, Compact size
• Motorola VT1005 – 2 FXS ports and QoS pass-through
• Oki Network Technologies – FXS gateways
• Ooma Telo
• Patton – M-ATA
• PLANET: – IP Telephony – Deliver Your Voice in Real Time
• Plextel – 1,2,4 ports ATA, SIP/H.323/IAX support
• Pluscom SIP VoIP ATA – 1 FXS and 1 FXO. DOES NOT gateway from VoIP to PSTN or vice-versa (hence listing here). Avoid.
• POLYPOWER: 1FXS , 2FXS / 1FXO support
• Power Systems: Mediatrix SIP 2-4 port FXS and 4 port FXO
• Sipura Phone Adapters (Please note Sipura have been acquired by Cisco/Linksys) – SPA-1001, SIPURA SPA-2000, SPA-2002, SPA-2100, SPA-3000 and Linksys-Cisco SPA-3102 : SIP
• Siemens SpeedStream 3610 Integrated ATA and Router
• Telco Systems Access200 Product Family VoIP Analogue Terminal Adaptors
• TelecomChinasourcing4-port, 8-port FXO, 32 port FXO, H.323,SIP with pstn autoreroute, FSK, polarity, answer supervision, auto attendant.
• https://www.tigernetcom.com 1 and 2 Port analogue adapters for SIP and Asterisk Compatibility
• UTStarcom Inc 2 port FXS gateway with PSTN lifeline.
• Vector, Taiwan Vector ATA, VT488, support traditional PSTN payphones need a metering (PR, 12Khz, 16 Hz ) signal to trigger to charge user.
• VegasStream many models from 1 port and up
• Virbiage 1-port ATA, designed to work with Asterisk via IAX2; features Web interface and voice prompts.
• Vocal Focusing on low cost ATA solutions and reference designs.
• Vtech VTech 4106 VoIP Terminal Adapter
• WiFi VoIP Gateway Build-in 802.11b/g, Broadband Router 1 WAN / 4 LAN, 2 ports FXS VoIP Gateway, to save the equipment purchasing cost.
• Yealink.com: Yealink SIP-GW3CM with 3 SIP user accounts, 1 FXS port, 1 PSTN Lifeline port, 1 WAN and Lan ports. SIP-GW2 with 1 FXS port, 1 PSTN Lifeline port, 1 WAN and Lan ports, specially design for SMB and home use!
• Speedytel S1 S2 lowcost voip adapter
• S1 1FXS + 1Lifeline VOIP adapter
• S2 2FXS VOIP Adapter
• Zoom 5801 Configuration Page – FXS, FXO, 911 override No longer maintained
• Zoom 5801 Updated Configuration Page Maintained & Updated
• ZyXEL 2 FXS ports

See Also

• VoIP Gateways
• VOIP Routers for combination Router/ATA devices
• How to activate an analogue DDI behind an ATA Gigaset DECT with activation of Direct Dial In
• Vonage Adapter

FXS to USB Adapters

An FXS to USB adapter is a device with at least one telephone jack (FXS port) used to connect a conventional telephone and a USB connector used to connect the adapter to a personal computer. Using an FXS to USB adapter it is possible to connect a conventional telephone to a personal computer. Unlike FXS to Ethernet gateways, FXS to USB adapters do not communicate directly with a VoIP server. Therefore, they require software to be run on the personal computer, typically a softphone. The software on the personal computer then communicates with the remote VoIP server and does the voice encoding and decoding. FXS to USB adapters also require driver software which may not be available on all operating systems and system platforms.

• Atcom USB ATA for skype AU-600 forward skype to your mobile phone
• BroadTel UPA-1: A unique USB to RJ11 FXS dongle supporting Windows Autorun for SIP. Plz contact [email protected] for OEM/ODM
• CuPhone USB ATA
• Digium S100U with drivers for Asterisk
• IndustryDynamics. IndustryDynamics offers an advanced Skype/USB to FXS device which can enable your home phone to make and receive Skype calls More info.
• PCPhoneline.com VTA1000 VoIP Gateway (SIP/H323/SKYPE). Eliminates The Need To Use A Softphone. Also Works With Dialup.
• USB-B1K. USB ATA. Yealink is the original manufacturer of this USB box.
• Xorcom Astribank 8-Port FXS USB adapter with Zaptel drivers for Asterisk.
• Yuxin USB PHONE, USB conference box, USB Gateway for skype forward skype to your ordinary phone.

FXO to USB Adapters

• Atcom USB ATA with 1 fxs 1 fxo for skype AU-600 forward skype to your mobile phone
• IndustryDynamics. IndustryDynamics offers an advanced Skype/USB to 1FXS/FXO device with voicemail and remote PSTN dialtone features. More info.
• POLYPOWER Phone Bridge: Skype ATA with 1FXS+ 1FXO
• Xorcom Astribank 8-Port FXO (or 6FXS/2FXO) USB adapter with Zaptel drivers for Asterisk.
• Yuxin USB PHONE, USB conference box, USB Gateway for skype forward skype to your ordinary phone.

FXS to Dialup Adapters

An FXS to Dialup adapter is a device with at least one telephone jack (FXS port) used to connect a conventional telephone and one FXO port with a built-in dialup modem to communicate with your dialup ISP. Using such an ATA it is possible to connect a conventional telephone to a remote VoIP server. The ATA communicates with the remote VoIP server using a VoIP protocol such as H.323, SIP, MGCP or IAX and encodes and decodes the voice signal using a voice codec such as gsm, ILBC, G723.1, and others. Since ATAs communicate directly with a VoIP server, they do not require any software to be run on a personal computer, such as a softphone.

• Aplio Phone H.323 and G723.1 with speakerphone
• Azadial SIP with G.723.1, G.729.A, and extra 10/100 for PC
• Goldennet Technology: FXS, PSTN backup dialup gateway.

VoIP Home Page | VOIP Phones | VoIP Gateways | Open Source VOIP Software |How To Debug and Troubleshoot VOIP | Codecs | VOIP Service Providers | VOIP sites | VoIP Phone Adapters | VoIP vs Landline