Configuring a tiny Asterisk system
There is a lot of interest in running Asterisk on “embedded” platforms like the Linksys NSLU2.
News
- 2014-01-18 New Series IP Telephony CooVox-U20 CooVox-U50 CooVox-U100 by Zycoo Exclusive Distributor in Iran Zycoo Iran PartoDadeh
- 2010-04-15 http://code.google.com/p/omapterisk/.Omapterisk Asterisk port for OMAP,that could run in Beagleboard or Hawkboard.
- 2008-05-21 The Asterisk Orgasmatron: A $199 Turnkey PBX Install in Under 15 Minutes Part I Part II
- 2008-05-08- Atcom releases first 8 ports asterisk embedded IPPBX : ((IP08 ))
- 2008-04-15-Soundwin releases modular 2/4 ports Asterisk embedded IPPBX: IPX200/400 on Blackfin.
Resources
- Aelintra Telecom SARK200 Fast, low cost Asterisk and advanced GUI on ARM.
- beroNet: OpenPBX beroNet OpenPBX: embedded Asterisk including GSM/FXO/FXS/BRI support
- http://www.plugpbx.org – Download pre-built SD card images to run FreePBX/Asterisk based on Debian Squeeze via the ARM SheevaPlug embedded computer. Ease of use core focus and building a collaborative community. Come run FreePBX on a 3 watt computer with plenty of power that’s entirely open and easy to hack. $99 USD device.
- http://code.google.com/p/omapterisk/.Prebuilt Root FS for Omapterisk -Asterisk port for OMAP,that could run in Beagleboard or Hawkboard.
- PBX in a Flash – We’ve tried to collect in one place everything you will need to create your own PBX in a Flash system in under an hour!
- Atcom: Asterisk based on Blackfin chipset, uClinux: IP04(( IP08))
- AstBoxLinux small Linux with “Bristuffed” Asterisk, Zaptel, Libpri, zaphfc and development tools for CF, USB sticks and Flash disks
- AstLinux Customized version of Linux designed to run from compact flash or small Hard drive.
- Asterisk hardware Soekris running Asterisk on Soekris hardware.
- Asterisk hardware Gumstix Running Asterisk on Gumstix (World’s Smallest VoIP PBX)
- Asterisk fli4l: OPT package for the router-on-a-diskette fli4
- Build your own Asterisk hardware based on the Free Telephony Project (Aug 2006)
- IP04 Open Hardware IP-PBX: An open (free as in speech) four port IP-PBX design that can be built for around $100 and will retail for around $400.
- AskoziaPBX, ~10MB image, * 1.4, FreeBSD 2.6, derived from monowall, images for soekris, wrap, standard pc, vmware
- HP Thin Client Run Asterisk and/or OpenSER on a solid state HP Thin Client using a standard Debian install.
See also:
- Asterisk Linksys WRT54G
- Asterisk Appliances
- Asterisk tips and tricks
- Asterisk hardware recommendations
- Asterisk Bootable CDROM
- Asterisk Slimming
- Asterisk setup minimum
- Asterisk Linksys NSLU2
- Crosstool: Tool for cross-compiling for embedded systems
Go back to Asterisk