Asterisk Fujitsu 9600 PRI

Asterisk with a T100P connected to a Fujitsu 9600 with an ISDN PRI Card

9600 Software version: E12V10L21
9600 Hardware Used: BPTKCA, B1DK2B

Need to set DSW00-2 to OFF (D-Channel Inversion NO)
Set DSW00-3 OFF for ESF
Set DSW00-4 & DSW00-5 to OFF OFF for B8ZS
When making a cable to Asterisk, be aware that Fujitsu uses pins 4,5 & 7,8 instead 1,2 & 4,5. Make a cable like this:
Looking at top of connector with cable exiting towards you and locking tab down left to right:
PIN Asterisk 9600
1 wht/blu wht/brn
2 blu/wht brn/wht
3 wht/grn wht/grn
4 org/wht blu/wht
5 wht/org wht/blu
6 grn/wht grn/wht
7 wht/brn wht/org
8 brn/wht org/wht
BIG clue that your cable is not correct – LRS light on front of BPTKCA will not go out no matter what!

7/29/2009 Also works with a PhonicEQ Tormenta3/TE400P 4 port T1/E1 card in T1 mode

Asterisk Configuration

zaptel.conf

span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us

zapata.conf

;
; Zapata telephony interface
;
; Configuration file
[channels]
busydetect=1
busycount=7

relaxdtmf=yes
callerid=asreceived
;
context=bell
;
signalling=pri_net
;
usecallerid=yes
;
transfer=yes
;
echocancel=yes
;
echocancelwhenbridged=yes

switchtype=5ess

;
rxgain=0.0
txgain=0.0
;
group=1

immediate=no
;
channel => 1-23

9600 Configuration:

TBD