Asterisk setup home

Some setup..

• HP Vectra PII 400 Mhz MMX 128 Mb RAM.
• Digium X100P + TDM400P
• Grandstream BT102
• xten Lite on 4 PCs
• Siemens Gigaset DECT
• Low cost direct Dial using share DECT base Gigaset DECT with activation of Direct Dial In

Some other setup.. malaiwah‘s one

• AMD AthlonXP 2400+, 512 Mb RAM (running Gentoo Linux)
• X100P for PSTN connectivity (1 line)
• S100U for my local telephones (all connected on it, 1 extension)
• Xten Lite on 1 PC (LAN)
• Bridged networking to my work place, where I run another Xten Lite on my work PC (WAN over DSL)

• IAX2 to Pulver.com and to Gafachi

• Project #1: another S100U for the basement extension or maybe a Grandstream phone
• Project #2: install another IP phone in the neighbours house with a wireless lan connection (802.11b)

dkounal’s home setup

• AMD Athlon 2200XP, 512MB Ram, Slackware (v.10 and 2.4 kernel in the past, v.12 and 2.6 Kernel now)
• ISDN FritzPCI in TE mode with chan_capi and AVM drivers for TelCo OTE (ISDN BRI connection)
• ISDN HFC based card in NT mode with mISDN for connection with an old Siemens ISDN Gigaset 3070 DECT
• 2 Cordless phones and 1 repeater in the Siemens ISDN 3070 DECT
• 1 Sipura 2000 for two extensions
• 1 Sipura 3000 for one extension, also backup PSTN line
• 1 Grandstream BT102
• IAX2 to Pulver.com and VoipJet and SIP to iCall
• Xten to my portable computer
• fax sending/receiving through e-mail attachments using capi-tools, sff2bmp and custom scripts
• wakeup, voicemail facilities

Works perfectly!

• Asterisk hardware recommendations