Author: VoIP Info
asterisk at home festival weather configuration
Posted: August 24, 2005 MP3 Audio directly from NOAA! Updated URLs on 12-15-06 If you are in the San Diego NOAA Office area (and maybe others, check your regional NOAA Office homepage from http://weather.gov/), you can get an audio file of the…
Read More »Asterisk Zeroconf Support
Posted: August 24, 2005 Zero Configuration Networking or in short Zeroconf is an IETF standard for TCP/IP “networking in the absence of configuration and administration” (IETF WG Zeroconf Charter). Originally initiated by SUN Microsystems, its use has been most actively promoted and…
Read More »Asterisk cmd Notify
Posted: August 24, 2005 Notify Synopsis Network Notification Application for use in the Asterisk dialplan. Announce a callers name to your desktop pc. (so you know if it’s worth jumping for the phone ;-)) A UNIX client is included in the package….
Read More »Asterisk config bonjour.conf
Posted: August 24, 2005 bonjour.conf – config file for res_bonjour [general] bindaddr=eth1 ; network interface on which to accept bonjour requests domain=local ; bonjour domain, if unsure use local [service-id] name = <service name> type = _<type-name>.(_udp|_tcp) port = <service network port>…
Read More »Asterisk and Cable Modems with embedded ATAs
Posted: August 24, 2005 Using Cable Modems with Embedded ATAs with Asterisk Ok here’s the a challenge. I have just recieved a Motorola SBV5120 cable modem with two analog telephone ports. I didnt sign up for the cable phone service (of course)…
Read More »Asterisk Configurations for connecting with VOIP providers
Posted: August 24, 2005 It is considered bad style to use a dialstring with a password as in “user:[email protected]” since username and password will then show up on the console. Instead, for each provider enter a peer entry in sip.conf or iax.conf…
Read More »asterisk settings HKBN
Posted: August 24, 2005 Sample Asterisk config for Hong Kong BroadBand The following information has been depreciated” On 2006-Mar-09, Subscribers to the old non-“2b” system were re-assigned to the “2b” system. If you were a subscriber to the old non-“2b” system,…
Read More »Polycom Idle Images
Posted: August 24, 2005 Idle Images According to the Polycom administrator manual here are the sizes that should be used for the idle image feature: Idle image for Polycom phones Model Width Height Color Depth IP 301 n/a n/a n/a IP 320/330…
Read More »IPCHITCHAT
Posted: August 24, 2005 About IPCHITCHAT We are a UK specialist in providing reliable, competitively priced communications solutions based on Voice over IP (VoIP) technology including business telephone systems. We provide communications solutions for both business and residential customers that enable customers…
Read More »Fax over IP – FoIP
Posted: August 24, 2005 Fax over IP can be done in many ways, either real-time or store-and-forward Real-time Transmission of a fax audio stream over a VoIP protocol, like SIP, IAX, H.323. This requires an uncompressed 64 kbit Codecs to have any…
Read More »Asterisk High Availability Solutions
Posted: August 24, 2005 This page outlines the various option available to create high availability for a VoIP PBX. Some are generic solutions while others are PBX specific. Some are complete HA solutions while others are half-baked scripts that do some things…
Read More »Asterisk administration
Posted: August 24, 2005 How to manage your Asterisk PBX These are suggestions on how to setup and manage your Asterisk PBX. edit: Half of the stuff in here is completely false. Take it all with a grain of salt. Caching nameserver:…
Read More »Asterisk Linksys NSLU2
Posted: August 23, 2005 Asterisk on Linksys NSLU2 The Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives) is a Network-attached storage (NAS) device that has user-modifable firmware. As usual there’s more than just one way to play with Linux (and…
Read More »VoIPTelco.net
Posted: August 23, 2005 VoIP Softswitch Sales: We sell voice over IP Softswitch server systems which are required to configure, route, and translate VoIP traffic. The Softswitch comes with Asterisk pre-installed and is based on the popular IP telephony protocols, SIP, IAX,…
Read More »Asterisk zapata gain adjustment
Posted: August 22, 2005 Setting the receive and transmit gain correctly is important to minimize echo and to enable clear conservations. This is important for BOTH PRI and Analog lines into zaptel interfaces If you have Asterisk v1.0.9 or earlier then you…
Read More »
Phone System 