Author: VoIP Info
Asterisk cmd SayNumber
Posted: May 11, 2005 Synopsis Says a number (e.g. “one thousand, two hundred and eighty eight”). Description SayNumber(number, gender) Says number, in the language choosen (defaults to English). Copes only with integers between 0 and 99,999,999. Gender is one of “f” female…
Read More »SER module PA and Internet 2
Posted: May 11, 2005 Internet2 is a consortium of university, corporate, and affiliate members working together to develop and deploy advanced network applications and technologies for research and higher education. In addition to a VoIP working group, it also hosts a Presence…
Read More »SIP tools
Posted: May 10, 2005 Various SIP tools Sip debugging and testing SIPsak: The swiss army knife PlaySIP: Recording a SIP media stream VoIP Recorder: Monitor and Recording SIP media streams. http://www.pcbest.net SIP Server tools Load balancer: SIP Server load balancer SIP development…
Read More »Asterisk settings NeoPhoneX
Posted: May 10, 2005 The following configuration settings worked fine for me: sip.conf [NeoPhoneX]type=peersecret=your-secretauth=md5username=7xxxxxhost=sip.neophonex.hufromuser=7xxxxxfromdomain=sip.neophonex.hunat=noinsecure=verycontext=sip-incomingcallerid=7xxxxxdisallow=allallow=ulawallow=alawallow=ilbc For some strange reasons, NeoPhoneX’s SIP Express Router dials 10069s as your dialin number, instead of s. extensions.conf [globals]OUT_SIP=SIP/NeoPhoneX [sip-incoming]exten => 10069s,1,Macro(stdexten,XX,SIP/XX)exten => 10069s,2,Hangup [sip-pstn]exten => _06xxxxxxx.,1,Dial(${OUT_SIP}/${EXTEN})exten =>…
Read More »Asterisk cmd Ringing
Posted: May 10, 2005 Indicate ringing tone Description Ringing() Request that the channel indicate ringing tone to the user. On an unanswered SIP channel this will send a “180 Ringing” to the endpoint. Example On an answered channel Ringing returns immediately and…
Read More »snom mass deployment
Posted: May 10, 2005 To deploy SNOM phones with an asterisk server try the new res_phoneprov that uses the users.conf file to present all the settings to the SNOM phones. By default the res_phoneprov does polycom phones but is easy to setup…
Read More »Asterisk config zapata.conf.sample
Posted: May 10, 2005 ; ; Zapata telephony interface ; ; Configuration file [channels] ; ; Default language ; ;language=en ; ; Default context ; context=default ; ; Switchtype: Only used for PRI. ; ; national: National ISDN 2 (default) ; dms100:…
Read More »Asterisk Modules
Posted: May 10, 2005 These are modules you can load or unload in the Asterisk config modules.conf configuration file. In addition to these modules, most applications are also modules you can load or unload. chan_agent.so: Used for the ACD see Asterisk Agents….
Read More »NbooM
Posted: May 9, 2005 ********************************************************************************************* NbooM is looking for buyers to sell its Asterisk-based VOIP solutions at a very reasonable price. This is a golden opportunity to hit the ground running with a VOIP business that has tremendous potential. NbooM’s Asterisk-based VOIP…
Read More »NetFabric
Posted: May 9, 2005 VoIP Intelligent Call Directors The NetFabric FUS1ON 4:4 and 12:8 Intelligent Call Directors come with basic configuration software that allows the customer to determine how calls are transported – local calls, including urgent E-911 calls, go over the…
Read More »Asterisk cmd SendURL
Posted: May 9, 2005 Synopsis: Send a URL Description: SendURL(URL[|option]) Requests client go to URL. If the client does not support html transport, and there exists a step with priority n + 101, then execution will continue at that step. Otherwise, execution…
Read More »Bandwidth consumption
Posted: May 9, 2005 VOIP Bandwidth consumption naturally depends on the codec used. When calculating bandwidth, one can’t assume that every channel is used all the time. Normal conversation includes a lot of silence, which often means no packets are sent at…
Read More »Dante’s DIAX Software Phone
Posted: May 9, 2005 From Website: This is a full featured and very small (just around 100KB for all the files) IAX based software phone for Microsoft Windows platforms (only). Development appears to have ceased. Latest version was released in 2005. Tips:…
Read More »Asterisk automatic daily restart
Posted: May 8, 2005 To automatically restart Asterisk you can add something like this to cron Restart Asterisk PBX once a day to prevent any problems from piling up 10 7 * * * root /usr/sbin/asterisk -rx “restart now” >/dev/null 2>&1 or…
Read More »Asterisk bounty non-Bellcore-CLID
Posted: May 7, 2005 X100P unable to do this ? Okay, so since this was posted there has been some work on the TDM series (in fact, there are options for it in CVS) but the X100P remains an issue. This is…
Read More »
Phone System 