Asterisk audio convert module
Posted: December 13, 2005 Now, the module has its homepage at http://redice.krisk.org (Thank krisk17 for the free hosting). Go there for detail information. DO NOT use the version download from this wiki page please, it may break your asterisk from work when…
Read More »SS7 Point Code
Posted: December 13, 2005 Like IP addresses in TCP/IP networks, point codes in SS7 networks identify individual network elements. Every element needs address (a point code). Every link is considered point-to-point, but could be established from different elements of SS7 Network, so…
Read More »QuickDial by X1Z.Net
Posted: December 12, 2005 QuickDial is an auto-dialer extension for FireFox and Thunderbird which works with any provider that supports web-triggered calls for their users. Providers can be calling-card services, VOIP Services, alternate long-distance, etc. Users may signup with one or more…
Read More »Modified Weather.agi to Work with Cepstral
Posted: December 11, 2005 Download and install Cepstral following these directions. http://www.oldskoolphreak.com/tfiles/voip/installing_app_cepstral.txt One mistake is at the end of the doc. “Now that Asterisk is installed/rebuilt, make sure your /etc/ld.so.conf file has /opt/swift/libs”” Should read /opt/switf/lib (without the s) I have changed…
Read More »Asteriskathome_quadbri
Posted: December 10, 2005 This page is based on the fine work of: How to install an HFC Card for Asterisk@home and European isdn by donDisperato – now compatible with 2.0 1. Install your quadbri card and set the jumpers correct (I’ll…
Read More »ZULTY 4×5 Config
Posted: December 10, 2005 The following are example config files from a working phone attached to an asterisk server ….. These settings above should be store in a file called MAC-ADDRESS.cfg on your tftp server [HW_CONFIG] LCD_CONTRAST=7 RING_VOLUME=10 SPEAKER_VOLUME=10 HEADSET_VOLUME=10 HANDSET_VOLUME=10…
Read More »Asterisk config template
Posted: December 8, 2005 Asterisk configuration templates Configuration templates are a means to avoid repetitive sections in Asterisk configuration files, such as extensions.conf, sip.conf or iax.conf. For use template configurations, the syntax for defining a section is as follows: [section](options) label =…
Read More »X100P
Posted: December 8, 2005 The Digium X100P is a single port FXO (foreign exchange office) card whose job it is to interface an analog line from the phone company to your linux box. There are two variations of this card. The first…
Read More »2N Omega IP PBX
Posted: December 7, 2005 The 2N Omega IP PBX is a professional modular PBX system that integrates professional communication tools into a system with standard interfaces for all networks and represents a cost effective and easily expandable solution for SME companies. The…
Read More »2N VoiceBlue Enterprise
Posted: December 7, 2005 Using 2N VoiceBlue Enterprise as a Simple VoIP SIP PBX! This guide will show you how to easily configure the 2N VoiceBlue Enterprise GSM IP gateway> as a SIP proxy for routing of outgoing calls to GSM. The…
Read More »Asterisk News Reports
Posted: December 7, 2005 I thought it would be nice for my Asterisk server to be able to read me the news, considering as such that it alreadytells me the time and the weather. 😀 A good source of news updates is…
Read More »Asterisk cmd ZapSendKeypadFacility
Posted: December 4, 2005 Synopsis: Send the given string of digits in a Q.931 Keypad Facility IE out of band over the current Asterisk ZAP channels This command is not for use with analog lines. New in Asterisk trunk-version 1. December 2005…
Read More »Asterisk cmd DPickup
Posted: December 1, 2005 DPickup Asterisk now comes with its own directed Pickup application, see bug 4865. Due to a naming conflict with the bristuffed Pickup application, the Asterisk pickup application is renamed to DPickup in bristuff >= 0.3. The syntax is…
Read More »TclMyAst
Posted: November 29, 2005 Created by Penguin PBX Solutions This package contains Tcl code to interface with the Asterisk manager commands via TCP/IP. Tcl is a powerful cross-platform scripting language. Besides allowing you to create a graphical Tcl/Tk based application using this…
Read More »Avaya or Lucent Magix Voicemail Integration
Posted: November 29, 2005 Integrating Asterisk with the Avaya Merlin Magix PBX I recently needed to replace the voicemail server for a customer with a flexible alternative. We weren’t in a position to remove the Avaya Magix PBX, so continued (and seamless)…
Read More »
Phone System 