Voice over IP Directory Services
Posted: October 20, 2005 It is now a well-known fact that VOIP is the next best thing since the Internet. In the next couple of years, the majority of voice communications across the world would be based on VOIP. Home users and…
Read More »SRV implementations
Posted: October 19, 2005 Here you find some test results of SRV based failover. Please extend this page with your test results: bad clients: – eyeBeam 1.1 3004w stamp 16863 uses first SRV, no failover, ignores ICMP (retransmissions) – eyeBeam 1.1 3010n…
Read More »Asterisk hardware Gumstix
Posted: October 18, 2005 At Astricon 2005 in Anaheim, CA I (Kristian Kielhofner) introduced the world’s smallest VoIP enabled PBX. Here are the facts: Gumstix 400xm – 16mb flash, 64mb RAM, 400mhz xscale Root filesytem (with Asterisk) as low as 7mb with…
Read More »Aastra 480i Dial Plan Config
Posted: October 18, 2005 This is the updated dial plan information for firmware version 1.3 A dial plan describes the number and pattern of digits that a user dials to reach a particular telephone number. The SIP local dial plan syntax is…
Read More »NetAppel
Posted: October 18, 2005 NetAppel.fr According to some comments on this wiki they’re connected with VoipBuster but they have different FREE countries you can call with their Application. The idea is like Skype where you have your buddies you double click on…
Read More »GOIAX
Posted: October 18, 2005 They seem to be a new organization trying to get customers. They offer the regular Member to member calling, but they also allow you to hook up your own Asterisk box, or IAX ATA (or softPhone) and you’re…
Read More »Sipura settings Voipbuster
Posted: October 16, 2005 Sample Sipura config for Voipbuster Assumptions: voipbuster username: foobar voipbuster password: abcdef9876 Line 1 > Proxy and Registration Proxy: sip.voipbuster.com Use Outbound Proxy: no Outbound Proxy: sip.voipbuster.com Use OB Proxy In Dialog: yes Register: yes Make Call Without…
Read More »QoS and Port Forwarding Speedtouch 510v4
Posted: October 16, 2005 Disclaimer: I am not a QoS expert, but it works for me. If like me you have a Thomsom / Alcatel Speedtouch 510 router that predates 2005, you’ve probably been a little frustrated at configuing the thing to…
Read More »Sipura settings SIPPhone
Posted: October 16, 2005 Sample Sipura config for SIPPhone Assumptions: mySIPphone number: 1-747-555-1234 mySIPphone password: 123456 Line 1 > Proxy and Registration Proxy: proxy01.sipphone.com Use Outbound Proxy: yes Outbound Proxy: proxy01.sipphone.com Use OB Proxy In Dialog: yes Register Expires: 120 Use DNS…
Read More »Sample Sipura config for Stanaphone
Posted: October 16, 2005 Assumptions: Username Authorization User: 8451234567 Password: 19BDzid9Wx Domain/Realm SIP Proxy: sip.stanaphone.com Outbound Proxy: “leave blank” DTMF: RFC-2833 Line 1 > Proxy and Registration Proxy: sip.stanaphone.com Use Outbound Proxy: no Outbound Proxy: Use OB Proxy In Dialog: no Register…
Read More »Sipura settings Callpacket
Posted: October 16, 2005 Sample Sipura config for Callpacket Assumptions: Sip Proxy : voip.callpacket.com Sip Username : cp00009988 Sip Password : 123456 Line 1 > Proxy and Registration Proxy: voip.callpacket.com Use Outbound Proxy: yes Outbound Proxy: voip.callpacket.com Use OB Proxy In Dialog:…
Read More »Sipura settings VBuzzer
Posted: October 16, 2005 Sample Sipura config for vBuzzer Assumptions: vbuzzer userid: foobar vbuzzer password: abcdef9876 Line 1 > Proxy and Registration Proxy: vbuzzer.com Use Outbound Proxy: yes Outbound Proxy: vbuzzer.com:80 Use OB Proxy In Dialog: yes Register Expires: 60 Use DNS…
Read More »Sipura settings Broadvoice
Posted: October 16, 2005 Sample Sipura config for Broadvoice Assumptions: You have your SIP credentials. If not try the following procedure on how to get your SIP credentials auth_id: 7035551212 auth_password: abcdef9876 proxy_ip: proxy-dca.broadvoice.com (transformed to proxy.dca.broadvoice.com for BYOD) registrar_ip: sip.broadvoice.com phone_number:…
Read More »Sipura settings HKBN
Posted: October 16, 2005 Sample Sipura config for Pre-October 2005 Hong Kong BroadBand service The following information has been deprecated. Please look at the “2b” setup for Sipura/Linksys devices Assumptions: Account created before October 2005 (if your account is with HKBN’s “2b”…
Read More »Sipura settings HKBN 2b
Posted: October 16, 2005 Sample Sipura config for Hong Kong BroadBand “2b” service Assumptions: Account created starting October 2005 (if your account is before October 2005 or is NOT a “2b” account, then you want to look here Softphone password: abcdef9876 Phone…
Read More »
Phone System 