Asterisk sip autocreatepeer
Posted: June 13, 2005 Autocreatepeer The Autocreatepeer option allows, if set to Yes, any SIP ua to register with your Asterisk PBX as a peer. This peer’s settings will be based on global options. The peer’s name will be based on the…
Read More »ACTOS
Posted: June 13, 2005 Asterisk Configuration Tool Open Source NEWS : 13/06/2005 : BUG FIX for the client : version 2.25 (see below for last changes) NO NEED TO UPDATE THE SERVER WHAT IS ACTOS : An intuitive GUI in Python+GTK for…
Read More »TFTP
Posted: June 13, 2005 Trivial File Transfer Protocol TFTP is a simple form of FTP protocol that uses UDP and provides almost no security. It is mostly used to boot diskless workstations as well as transferring small files between hosts. TFTP Protocol…
Read More »Asterisk fli4l
Posted: June 11, 2005 Asterisk for fli4l fli4l initially is a router-on-a-floppy project, however using OPT packages many contributions have been added that go far beyond pure routing functions. Installs are also possible on hdd, cdrom or flash. Note that Asterisk for…
Read More »Asterisk SIP externip
Posted: June 11, 2005 Description externip = extern.ip.address Indicates the IP address (alternatively you can enter a hostname) that will be used as the source IP address for all SIP messages when Asterisk sip nat is specified. Examples: Use it in [general]…
Read More »Asterisk cmd ChanIsAvail
Posted: June 11, 2005 Synopsis Check if channel is available Description ChanIsAvail (Technology/resource[&Technology2/resource2…][|options]) Checks if any of the requested channels are available. Note that the AVAILSTATUS variable is used for both device state and cause code. It is therefore possible for it…
Read More »BSD
Posted: June 10, 2005 The FreeBSD Project VoIP technologies available on FreeBSD Aqua Gatekeeper – Aqua H323 Gatekeeper and proxy Asterisk – the open source PBX and multi-protocol VoIP server CallWeaver – an open source PBX derived from Asterisk CPhone – H323…
Read More »Asterisk MFC R2
Posted: June 10, 2005 Page Contents Disclaimer New MFC/R2 Library Architecture Getting zaptel set up to use an E1 card for MFC/R2 Getting the libraries installed Testing your MFC/R2 signalling installation Getting Asterisk to work with your MFC/R2 setup Country and carrier…
Read More »Asterisk gastman
Posted: June 10, 2005 Gastman (note: this does not appear to be under active development though nightly snapshots are still provided and code still works. If you are the author, please update this page. – March 6, 2007) Gastman is a graphical…
Read More »MPLAT
Posted: June 9, 2005 Products: USB Phone P1K for skype USB Phone P3K for skype USB Telbox B2K for Skype, support h323, SIP ===IP Phone T1K === Key Features Make/receive both VoIP calls and PSTN regular calls Rings loudly on an incoming…
Read More »Asterisk cmd SayUnixTime
Posted: June 9, 2005 Synopsis Says a date and/or time to the caller. Syntax SayUnixTime(unixtime,timezone,format) Description Uses some of the sound files stored in /var/lib/asterisk/sounds to construct a phrase saying the specified date and/or time in the specified format. unixtime is the…
Read More »DTMF
Posted: June 8, 2005 The following definition for DTMF comes from Wikipedia “Dual-tone multi-frequency (DTMF) signaling is used for telephone signaling over the line in the voice-frequency band to the call switching center. The version of DTMF used for telephone tone dialing…
Read More »BRI
Posted: June 8, 2005 BRI (Basic Rate Interface) BRI is an ISDN access method, typically used for home and small offices. Consists of two 64Kps digital channels and one 16Kbps digital signalling and control channel. Often referred to as 2B+D Support for…
Read More »Asterisk mpg123 redhat
Posted: June 7, 2005 Musiconhold on RedHat Linux Redhat (v7-v9) has replaced the mpg123 application with another application, mpg321, and created a symbolic link to “mpg123”, so it seems to work in the same way. Asterisk MusicOnHold only works with original mpg123….
Read More »mpg123
Posted: June 7, 2005 Quoted from the homepage: “mpg123 is a real time MPEG 1.0/2.0/2.5 audio player for layers 1,2 and 3 (MPEG 1.0 layer 3 aka MP3 most commonly tested). Among others working with Linux, MacOSX, FreeBSD, SunOS4.1.3, Solaris 2.5, HPUX…
Read More »
Phone System 