zaptelBRI TE mode zapata.conf
Posted: February 13, 2004 [channels] ; ; ISDN quadBRI interfaces ; switchtype = euroisdn signalling = bri_cpe_ptmp pridialplan = local group = 1 context=to-pstn channel => 1-2 switchtype = euroisdn signalling = bri_cpe_ptmp pridialplan = local group = 2 context=to-pstn channel =>…
Read More »Asterisk setup soho 16
Posted: February 12, 2004 Non-profit European youth NGO With ASTERISK the Brussels-based headoffice aims at drastically reducing the costs for international phone calls, while allowing remote chapter offices and individual members to call in through VoIP (Free World Dialup) – voice communication…
Read More »SDP
Posted: February 12, 2004 SDP is intended for describing multimedia sessions for the purposes of session announcement, session invitation, and other forms of multimedia session initiation. SDP is used from VoIP signalling protocols like SIP, H.323 and some minor VoIP protocols to…
Read More »Asterisk “s” extension
Posted: February 11, 2004 The “s” extension is used when there is no known called number in the context used. The “s” extension is used when starting a call. It is also used when defining a macro. Incoming calls are always placed…
Read More »Getting Gnophone to work
Posted: February 8, 2004 GnoPhone (http://www.gnophone.com) is a linux based soft phone. If you run linux it is one of the best ways to play with Asterisk. Some important starting points GnoPhone is a IAX client, not a sip client. Please do…
Read More »Asterisk sip fromuser
Posted: February 8, 2004 Fromuser= and fromdomain= This is used when calling TO this peer FROM asterisk. If you’re using _register=>_ with another SIP proxy, this setting can come in handy since some SIP networks only allow users in the right domain…
Read More »Asterisk cmd DynExtenDB
Posted: February 8, 2004 What is DynExtenDB? DynExtenDB is a simple solution to manage a huge amount of extensions which change quite often. DynExtenDB is something like your old extensions.conf, but it changes the way extensions are used. Your extensions will (additionally…
Read More »Asterisk cmd AgentMonitorOutgoing
Posted: February 6, 2004 Syntax: AgentMonitorOutgoing([options]) Tries to figure out the id of the agent who is placing outgoing call based on comparision of the callerid of the current interface and the global variable placed by the Asterisk cmd AgentCallbackLogin application. That’s…
Read More »World Phone
Posted: February 5, 2004 The World Phone works just like the telephones you currently use. Dial tones, busy signals, and call waiting notification are all supported. . Clear communications on broadband AND dial up connections, anywhere in the world.. Connection is through…
Read More »SIP method message
Posted: February 1, 2004 From the Abstract of RFC 3428: Instant Messaging (IM) refers to the transfer of messages between users in near real-time. These messages are usually, but not required to be, short. IMs are often used in a conversational mode,…
Read More »PBX Skill Based Routing
Posted: February 1, 2004 Skills Based Routing Definition The following is the Wikipedia definition for Skills Based Routing: “Skills-Based routing (SBR) is a call assignment strategy used in call centers to assign incoming calls to the most suitable agent, rather than simply…
Read More »Asterisk 0.7.0
Posted: January 28, 2004 Changes in 0.7.0 since 0.5.0 VoiceMail and VoiceMailMain were discontinued in favour of VoiceMail2 and VoiceMailMain2IAX was discontinued in favour of IAX2; to completely remove IAX1 support from Asterisk it is suggested to include “noload => chan_iax.so” in…
Read More »RFC 3311
Posted: January 27, 2004 The Session Initiation Protocol (SIP) UPDATE Method Abstract This specification defines the new UPDATE method for the SessionInitiation Protocol (SIP). UPDATE allows a client to updateparameters of a session (such as the set of media streams and theircodecs)…
Read More »Asterisk OpenBSD patch
Posted: January 24, 2004 Asterisk 0.7.1 on OpenBSD 3.4 For use asterisk on OpenBSD i’ve create a patch, because a lot of compilation error append. Use ‘gmake’ not ‘make’ Like lot of other linux software you must use gmake (if you don’t…
Read More »Asterisk OpenPSD patch
Posted: January 24, 2004 Asterisk 0.7.1 on OpenBSD 3.4 For use asterisk on OpenBSD i’ve create a patch, because a lot of compilation error append. Use ‘gmake’ not ‘make’ Like lot of other linux software you must use gmake (if you don’t…
Read More »
Phone System 