freePbx 2.2.3 /trixbox 2.8.x installation help – what I check if Problems occours:
1. # lsmod > and make sure your Digium Card is listed like wcte12xp
if you miss your d=Digium Card, call the free Digium Harware Support (great guys)
or try > modprobe wcte12xp > and try lsmod again.
If you still miss your module, compile it from Diguim or call the Support
(make sure your ssh is ready for support )
I assume you can see the hardware now.
2. # zttool > and you can see your channels
If ztdummy shows up, you need to remove it with > rmmod ztdummy
3. # ztcfg -vvv > and you configure your channels
4. # ./usr/src/zaptel-1.2.21/xpp/utils/genzaptelconf -d
or
./usr/src/zaptel-1.2.21/xpp/utils/genzaptelconf -s
depend asterisk is running.
It should work – check your
1. /etc/zaptel.conf
like:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
2. /etc/asterisk/zapdata.conf
you can customize your modules also here:
/etc/sysconfig/zaptel
Good luck
Peter Koegel
Xelia Wizard Systems Inc
pkoegel@azxws.com
Phone System 