NO JOY Failed to authenticate trunk

[cantVOIP]

Can anyone point me to the right direction here? Thank you all in advance!

Hello everyone, I've been using IncrediblePBX with Obihais to connect my verizon landlines. This set up has worked perfect for years.
I have comcast as my internet provider, and the bundle includes a phone number which comes from the modem itself. I decided to configure another Obihai to get this number working with my pbx but I'm running through some issues.

Asterisk 18.2.1
Incredible GUI 15.0.22.33
Incredible PBX 2021.01 for Debian 10.9 Buster
TLS, PJSIP, Authentication Outbound, Registration Receive (Obihai successfully registers to PBX)

The number 2222222222 is the number of the person calling, and not from the Obihai number, hence it fails to authenticate.

35190[2024-08-13 14:04:46] NOTICE[9114] res_pjsip/pjsip_distributor.c: Request 'INVITE' from '"WIRELESS CALLER" <sip:[email protected]>' failed for '192.168.30.77:4956' (callid: [email protected]) - Failed to authenticate
35191[2024-08-13 14:04:46] NOTICE[12127] res_pjsip/pjsip_distributor.c: Request 'INVITE' from '"WIRELESS CALLER" <sip:[email protected]>' failed for '192.168.30.77:4956' (callid: [email protected]) - Failed to authenticate

This is usually how it looks like when I get a call for one of my verizon lines

35811 [2024-08-13 14:10:42] VERBOSE[5782][C-000005c4] pbx.c: Executing [7776661111@from-pstn:1] NoOp("PJSIP/777-666-1111-00000d83", "Catch-All DID Match - Found 2012231613 - You probably want a DID for this.") in new stack
35812 [2024-08-13 14:10:42] VERBOSE[5782][C-000005c4] pbx.c: Executing [7776661111@from-pstn:2] Set("PJSIP/777-666-1111-00000d83", "__FROM_DID=2012231613") in new stack
35813 [2024-08-13 14:10:42] VERBOSE[5782][C-000005c4] pbx.c: Executing [7776661111@from-pstn:3] Goto("PJSIP/777-666-1111-00000d83", "ext-did,s,1") in new stack

 

[dallas]

I have comcast as my internet provider, and the bundle includes a phone number which comes from the modem itself.

Why do you want to push these calls through the Obihai? It's already an SIP inbound call, just create an inbound route for the calls using the DID allocated by Comcast.

 

[cantVOIP]

I was trying to use the obihai to pass the call from the modem using a telephone cable, to the Obihai, which then connects to my network and my PBX.

I checked my comcast modem and there are no options to pass the SIP number to my system. The only option I see is the following. Any suggestions? Thanks for the reply!

 

[cantVOIP]

Obihai ITSP Profile/SIP had X_SpoofCallerID enabled.
This was causing the authentication issue in the PBX server. I disabled it and the calls are able to pass through.