Opensource 16 E1 / T1 telecom card

Low cost and High quality Telecom Hardware
It’s time to rethink on available open source telecom hardware, available ones are just not enough for current need ……
To list few I have tried with various variants of zaptel which are just a dumb card and leaves lot of load on various call managers like asterisk or free switch….. But thanks to all who initiated and contributed to its development.
Is it possible to build a open source carrier grade (preferably with 16e1s) card with a good communication processor and a DSP to support on board media processing for both audio and video under 500 USD ?
Yes it is possible ………………………………….and
is it possible to build a quality card which is better than today’s dialogics or PT or Telesoft of the worlds
yes it is possible.

http://telecomhw.blogspot.com/

Features for 16e1/t1 telecom card

16 soft configurable E1/T1
PCI-e , PMC board formats
256 LSL links
8 HSL links
Audio & Video support
ISDN , SS7 and Sigtran support
Support for ATM
Onboard CPU for dedicated protocol processing
on Board DSP support audio and Video processing
Drivers for linux and windows

http://telecomhw.blogspot.com/

Specs of 16e1/t1 Telecom Card
Protocol Support
• SS7 MTP2,MTP3,ISUP (ANSI/ITU-T)
• Broadband SS7 ATM AAL5:
• HDLC
• M3UA,M2PA,SCTP
• PCM Voice
• ISDN
Interfaces
• 16 E1/T1/J1
• 1 Gig Ethernet Port
• PCI-E

http://telecomhw.blogspot.com/

components for 16 e1/T1 Telecom Card
choices for Active components for building 16 E1 Card

Processor :
MPC from Freescale
Winpath3 from wintegra http://www.wintegra.com/page/winpath3-overview

DSP for media processing
TI –TMS320C6424 http://focus.ti.com/docs/prod/folders/print/tms320c6424.html
Freescale

Frammer :
Infeneon — Octal Frammer http://www.lantiq.com/products/wireless-backhaul/te/falctm/octalfalctm/
PMC — http://www.pmc-sierra.com/products/details/pm4358/
FPGA based e1/t1 core

PCI-E
PLX Technologies

http://telecomhw.blogspot.com/