The Rhino R1T1 digital PCI card is specially designed to allow you to fully enjoy the benefits of digital telephony. It has one digital RJ48 jack that supports a single digital span connection to your telephony server.
The R1T1 card supports all of the major types of digital telephony interconnection technologies, including T1, E1, J1, ISDN and PRI. The card simply installs into the telephony system using a 33/32 PCI slot, either +3.V or +5V, with the one card. The R1T1 span hosts two status LEDs to provide a view of the status of the span from the back of the system. This allows for simple and easy installation and system status by simply looking at the LEDs.
You can also use this card to easily to connect Channel Banks to the telephony server. A Channel Bank connects to the digital telephony card using a cable from the port. You can increase the number of Channel Banks to a larger number of analogue lines by installing multiple cards into the system. If you have ever been annoyed by the echo that might appear during a phone call, we have good news for you.
The R1T1 has a “user capable” installation slot where you can upgrade with the digital Rhino Equipment Echo Cancellation module that will reduce the echo of your calls to zero.
And don’t forget about the life support that only Rhino offers to its customers. Whatever problem you might be experiencing with the card, our technical support team will take care of it right away. What is more, our products come with the Rhino 5-year limited warranty, one of the best on the market.
Standard Features
- Asterisk soft PBX tested and ready
- zaptel/DAHDI compatible
- T1/E1/J1 embedded CSU
- Line buildout software selectable
- Custom Rhino PCI interface chip means no wasted CPU overhead
- Fractional voice and data capable
- Zttool compliant interface
- Field software upgradable
- Alarm and Link status LEDs visible from the rear bracket
- E&M, PRI, Loop, Ground, Kewl, etc, signaling protocols
- Distinctive ring in Loop start mode
- Caller ID enabled in Loop start mode
- 5-year limited warranty
- Unlimited Hardware Support
CSU Features
All Rhino PCI T1 cards feature a single chip integrated CSU with both LIU and Framer, that is software controlled and software programmable
- Complete T1/DS1/ISDN-PRI/E1/J1 Transceiver Functionality
- Long-Haul and Short-Haul Line Interface for Clock/Data Recovery and Waveshaping
- Crystal-Less Jitter Attenuator
- Fully Independent Transmit and Receive Functionality
- Single chip line interface unit (LIU) and Framer
Zaptel Features
- T1: D4 or ESF, AMI or B8ZS
- Line buildout selections: 0-133 feet or 0db, 133-266 feet, 266-399 feet, 399-533 feet, 533-655 feet, -7.5db, -15db, -22.5db
- Loopback modes under software selection (zttool)
PCI Card Mechanical Data
Size: 6.35 cm tall, 12.1 cm wide(2.5″ tall, 4.75″ wide)
Form Factor: Single PCI slot
Weight: 0.45 kilograms (1pound with all included components maximum
Related Products
Echo Cancellation Module for all Digital PCI Plug-In Cards
24 Lines FXO Channel Bank with Data
24 Lines FXS Channel Bank with Data
24 Lines Modular Channel Bank with Data
Similar Products
((Rhino R2T1 – 2 Port E1/T1/J1 Digital Telephony PCI Plug-In Card))
((Rhino R4T1 – 4 Port E1/T1/J1 Digital Telephony PCI Plug-In Card))
April 7, 2023
Phone System 