Sipura settings Broadvoice

Sample Sipura config for Broadvoice

Assumptions:

• You have your SIP credentials. If not try the following procedure on how to get your SIP credentials
• auth_id: 7035551212
• auth_password: abcdef9876
• proxy_ip: proxy-dca.broadvoice.com (transformed to proxy.dca.broadvoice.com for BYOD)
• registrar_ip: sip.broadvoice.com
• phone_number: 7035551212
• DTMF: InBand

Line 1 > Proxy and Registration
Proxy: sip.broadvoice.com
Use Outbound Proxy: yes
Outbound Proxy: proxy.dca.broadvoice.com
Use OB Proxy In Dialog: yes
Register Expires: 120
Use DNS SRV: no

Line 1 > Subscriber Information
User ID: [email protected]
Password: abcdef9876

Line 1> Audio Configuration
DTMF Tx Method: InBand
Symmetric RTP: yes (if it’s a SPA-3000)

Network Address Translation Situation

If you are behind a Firewall/NAT router, you have two options:

1. Portforwarding
2. STUN

 

Portforwarding

The following ports must be portforwarded from your Firewall/NAT router to your SPA:

• UDP 5060
• The UDP port range specified from SIP > RTP Parameters > RTP Port Min until SIP > RTP Parameters > RTP Port Max

 

STUN Support

SIP > NAT Support Parameters
Handle VIA received: yes
Handle VIA rport: yes
Insert VIA received: yes
Insert VIA rport: yes
Substitute VIA Addr: yes
Send Resp To Src Port: yes
STUN Enable: yes
STUN Test Enable: yes
STUN Server: any public STUN server
NAT Keep Alive Intvl: 15 (can be increased after you are confident everything is configured properly)

Line 1 > NAT Settings
NAT Mapping Enable: yes
NAT Keep Alive Enable: yes
NAT Keep Alive Msg: $NOTIFY
NAT Keep Alive Dest: $PROXY

---

Sipura Documentation | Sipura | Broadvoice | STUN