Tap here to compare the top VoIP providersTap here to hide the top VoIP Providers
Rhino CB24-FXO - 24 Lines FXO Channel Bank with Data
The Rhino CB24 FXO Channel Bank acts as a T1 multiplexer (mux) that converts 24 digital channels to 24 analog FXO lines. This permits the usage of the old proven analog wiring inside your building to bring in POTs lines in conjunction with Asterisk digital technology. A Channel Bank can be connected to the PBX system by using a single port on a digital PCI telephony card, thus enabling the connection of a big number of lines to the system.
Thanks to the “Auto Config” feature of the Rhino Equipment Channel Bank you can save much time on the installation. Actually, you don’t even need to learn programming or how to use specific software. Our Channel Bank knows how to install itself. All you need to do is plug it in, and “Auto Config” does the rest. And that’s not all: the Rhino CB24 FXO Channel Bank supports data as well, and is configurable channel by channel.
Our Channel Banks use the latest digital technology and are fully embedded. This makes the risk of a component getting damaged minimum and assures the good functionality of the product. Our warranty stands as a proof of that. We offer the best one on the market: 5-year, limited warranty.
We offer as “standard” what others can’t offer at all
Yes, that’s right. Besides having the unique "Auto Config" feature, our Channel Banks support most of the common start protocols (Immediate, Wink, Loop, Ground, DID) as well as D4 or ESF and AMI or B8ZS. This means that the Rhino CB24 FXO Channel Bank can be installed in almost all situations, including dynamic data channels. And now, the new Channel Banks support Neon Bulb Message Waiting Indicators, which makes them perfect for upgrading hotel lines with Asterisk technology.
We also offer for free a fractional V.35 data port on each system, a port that can be used for the IP router connection.
And perhaps the most important of all: as all of our products, our Channel Banks come with free lifetime support, so that whatever problem you may experience with the device, our support team will handle it in no-time.
For further details and information, please contact our technical team!
- Asterisk soft PBX tested and ready!
- 4x40 LCD real-time status display shows independent AB bit signaling
- Automatic T1 configuration using artificial intelligence software, no configuration switches
- CSU auto detects T1modes: D4 or ESF, AMI or B8ZS
- T1 CSU via RJ48C, with line buildout programmability
- Internal power supply module, no external components
- FLASH based system configuration
- V.35 fractional data interface, user selectable to 56K or 64K
- Self diagnostics, verbose error reporting, loopback modes
- Single channel configuration, each channel may have a different analog start mode, signaling protocol, line current, or gain
- Telco network uptime and downtime T1 history
- Remote connection via RS-232c or Ethernet (optional) via Windows based graphical user interface
- Field software upgradable
- 19", 23" or wall mounting kit standard
- 7 ft T1 and T1 crossover cable (for Asterisk installs), 25 pair analog cable and a 110 or 220 power cable included.
- Immediate, Wink, Loop, Ground, RevPol, and three DID start protocols
- Distinctive ring in Loop start mode
- Caller ID enabled in Loop start mode
- Low cost fully populated FXS, fully populated FXO, or modular FXS/FXO mixed mode capable
- 110V AC, 220V AC and -48V DC modular power supply models
- 5-year limited warranty
The Rhino FXO analog interface requires a standard POTs analog telephone line up to 24 inputs Each channel provides:
- Digital DSP
- Tx and Rx gain control of -15db to +12db
- Ring cadence monitoring timer
All Rhino channel banks feature a single CSU that is software controlled, software programmable and will self configure to the proper mode right out of the box.
The Rhino channel bank provides either FXS or FXO analog interfaces, both with digital technology that utilizes a dedicated Digital Signal Processor (DSP) for monitoring real-time line characteristics.
FXO Channel Bank Mechanical Data
CB24-FXO-UNIV - 24 analog Channel FXO, fully populated chassis 110VAC, 220VAC, -48VDC All Rhino channel banks come in 110VAC, 220VAC or -48V DC models. The internal power supply module can be easily swapped.
Power Consumption: Maximum power consumption (under full load) will not exceed 100W.
Size: 8.9 cm (3.5") (2U) tall, 43.2 cm (17") wide and 21.6cm (8.5") deep
Weight: 5.45 kilograms (12 pounds)
Where to buyAmerica - Buy the Rhino CB24-FXO from 8774e4voip.com - In-stock with Free Expert Support! Shop Online or Call 877.434.8647
America - Rhino CB24-FXO at Telephony Depot: A premier retailer in the VoIP industry's online marketplace.
UK & Worldwide - VoIPon - Best Prices and Support on Rhino 24 Port FXO Channel Bank - Call for reseller pricing or International Shipping. VoIPon.
Worldwide - Rhino CB24-FXO at Telephony Depot: A premier retailer in the VoIP industry's online marketplace.
Worldwide - VoIP Gorilla - Preferred Rhino Distributor
See the Rhino Equipment Corp wiki page or visit: Our Website
Rhino R1T1 - 1 Port E1/T1/J1 Digital Telephony PCI Plug-In Card
Rhino R2T1 - 2 Port E1/T1/J1 Digital Telephony PCI Plug-In Card
Rhino R4T1 - 4 Port E1/T1/J1 Digital Telephony PCI Plug-In Card
24 Lines FXS Channel Bank with Data
24 Lines Modular Channel Bank with Data
CB24-FXO Official Product Page
Rhino Equipment Corp
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+