Digium Wildcard TE411P

VoIP Hardware Solutions
Provider Solution Details
VoIP Hardware Zycoo UC Solutions
  • Modular Design IP PBX for SMB
  • Remote office Centralized Management solution
  • 3rd party app integration, Enterprise Billing, Android & iOS client
Details
Yeastar Communications Solutions
  • Cost-effective IP-PBX Solution for SMB
  • FXS, FXO, GSM, BRI and PRI VoIP Gateways
  • Rich features and reliable performance
Details
Image


The TE411P is the next generation of Digium hardware that offer on-board echo cancellation. They supports both E1 and T1 environments and is selectable on a per-card or per-port basis.

Echo cancellation and DTMF detection is supported for four full T1 (96 channels) or E1 (124 channels) and improves voice quality in situations where software echo cancellation is not sufficient, where echo cancellation is not done at the CO, or where CPU utilization must be minimized. By supporting 16ms of echo cancellation over 128 channels, 32ms over 64 channels, or 64ms over 32 channels, this card will perform in the most difficult of environments while providing capacity/length tradeoff. It provides echo cancellation to analog channel banks or for E&M signaling with echo from the far end. The TE411P reduces CPU overhead required for software echo cancellation
and frees resources for other processes, such as codec translation.

Digium has designed the TE411P to be fully compatible with existing software applications and it is fully integrated with the Asterisk open source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE411P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE411P is for use with a 3.3-volt PCI slot.

Target Applications


Legacy PBX/IVR services
Voice-over Internet Protocol (VoIP) services.
Complex IVR Trees
Meet-me-Bridge conferencing
VoIP Gateways (supports SIP, H.323 and IAX)

PRI Switch Compatibility


EuroISDN (PRI or PRA) — Q.931/Q.921
AT&T 4ESS
DMS 100
Lucent 5E
Network or CPE
National ISDN 2

CAS Voice Modes


Feature Group D
E&M Wink
A-law, u-law and linear modes supported

Data Modes


SyncPPP (Both Fixed and Dialup)
Framr Relay
Cisco HDLC
Multi-link PPP

Echo Cancellation


G.168 compliant
128 taps over 128 channels (16ms over 128 channels)

See also


Where To Buy!


digiumcards.com - The Internet's premiere resource for all Asterisk related hardware - CLICK HERE FOR A LIVE QUOTE
VoIPon - Worldwide
Image


The TE411P is the next generation of Digium hardware that offer on-board echo cancellation. They supports both E1 and T1 environments and is selectable on a per-card or per-port basis.

Echo cancellation and DTMF detection is supported for four full T1 (96 channels) or E1 (124 channels) and improves voice quality in situations where software echo cancellation is not sufficient, where echo cancellation is not done at the CO, or where CPU utilization must be minimized. By supporting 16ms of echo cancellation over 128 channels, 32ms over 64 channels, or 64ms over 32 channels, this card will perform in the most difficult of environments while providing capacity/length tradeoff. It provides echo cancellation to analog channel banks or for E&M signaling with echo from the far end. The TE411P reduces CPU overhead required for software echo cancellation
and frees resources for other processes, such as codec translation.

Digium has designed the TE411P to be fully compatible with existing software applications and it is fully integrated with the Asterisk open source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE411P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE411P is for use with a 3.3-volt PCI slot.

Target Applications


Legacy PBX/IVR services
Voice-over Internet Protocol (VoIP) services.
Complex IVR Trees
Meet-me-Bridge conferencing
VoIP Gateways (supports SIP, H.323 and IAX)

PRI Switch Compatibility


EuroISDN (PRI or PRA) — Q.931/Q.921
AT&T 4ESS
DMS 100
Lucent 5E
Network or CPE
National ISDN 2

CAS Voice Modes


Feature Group D
E&M Wink
A-law, u-law and linear modes supported

Data Modes


SyncPPP (Both Fixed and Dialup)
Framr Relay
Cisco HDLC
Multi-link PPP

Echo Cancellation


G.168 compliant
128 taps over 128 channels (16ms over 128 channels)

See also


Where To Buy!


digiumcards.com - The Internet's premiere resource for all Asterisk related hardware - CLICK HERE FOR A LIVE QUOTE
VoIPon - Worldwide
Created by: VoIPon, Last modification: Mon 24 of Oct, 2011 (20:33 UTC) by admin
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - Find us on Google+