SOLVED fspbx install

[islandtech]

Following the icing on the cake guide: Changing the SIP Port for Phone Registrations
Step 9. Restart IPtables: iptables-restart
command not found
should the command include the hyphen

 

[dallas]

Step 9. Restart IPtables: iptables-restart

I think it would be more like iptables -restart

 

[kenn10]

Its /usr/local/sbin/iptabes-restart since the full path is required on FS PBX. If that is added to $PATH on the root login, you run into problems with some of the FS PBX or FreeSwitch stuff.
Actually, on my system, the /usr/local/sbin is in my $PATH already and that command works.

Perhaps if you log out and back in, your $PATH will be updated and then iptables-restart will work for you.

~# echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

 

[islandtech]

Thanks @kenn10

path was ok

find / -name iptables-restart returned no results

copied iptables-restart from my local incredible pbx and placed it in /usr/local/sbin
made it executable ran iptables-restart then systemctl restart freeswitch
changed the phones to the new port but they did not register
step 8. /etc/iptables/rules.v4 I had to add -A INPUT -p udp -m udp --dport NNNN -j ACCEPT for sip and tls-sip
after iptables-restart and sysremctl restart freeswitch the phones registered

 

[kenn10]

Sounds like something fell apart during the extras install but you figured it out.