freepbx

Hello everyone, I'd like to share an open-source project I've been working on for the Asterisk community. CloudSIP is a WebRTC SIP Phone that allows users to make and receive SIP calls directly from a web browser without installing a traditional softphone. It is available both as a...

Hi all, I’m setting up a Sangoma P370 on Incredible PBX (FreePBX / Asterisk 20) and running into provisioning confusion. A few questions: Are Sangoma phone templates intentionally missing from Endpoint Manager in Incredible PBX? Is there an official template package for Sangoma P-series...

Hello I'm hoping to get some help with a stubborn error on my IncrediblePBX installation. My ultimate goal is to get the Firewall module working so I can set up a click-to-call feature. However, during the installation of the Firewall (or System Admin) module, I am completely blocked by the...

Hi all, I'm working on a fresh installation of Incredible PBX 2025 and have run into what appears to be a critical failure in the installation process on a specific, modern cloud platform. I'm hoping to confirm if this is a known issue or if there's a workaround. My Goal: A clean installation...

Hi all, I'm currently running Incredible PBX 17.0.19.28 i tested the missed call notifications module and working fine, there is a delay until the email is sent unlike voicemail which is pretty quick, but that's really not an issue for me. only thing I'm looking for is changing is the server...

Hello! I'm trying to migrate from FreePBX 16 to Incredible PBX 2025, and was wondering if there are any caveats to look out for. I installed Incredible PBX on LMDE 6 (based on Debian 12, in opposed to Ubuntu), and it seems to be working so far. I'm not sure if I can use the built-in backup and...

I know this might seem like "other community drama," but it’s significant enough to bring here. I’ve put thousands of hours into FreePBX, helping build it from the ground up, and I recently tried to voice concerns directly on their community forum. I raised hard questions about why Sangoma, the...

Hello, I am trying for almost a month now to understand what I'm doing wrong with the Anveo Direct outbound calling via my FreePBX. All I need to do is to have a PJSIP account that I can register to with my SIP client, and make calls through Anveo Direct. Below are my actions so far, and a log...

Hi everyone. I hope oneone can help me. Cant still clear all the warnings im seeing. I update my freepbx last week and it gives me bunch of WARNINGS after applicing changes. I confirmed this on my old snapshot dated Jan 1st but I cannot replicate the warnings that im getting today. I was...

Hello, I am having an odd problem. All of a sudden one of my inbound numbers is sending my server IP address as the telephone number in the caller ID. This is only happening on the one inbound number. Here is the kicker, the calls are still going into the recording folder with the correct caller...

Hello everyone, I have a problem completing the setup of a Cisco phone. This is what I did: Set up a Raspbx Configured 3 SIP softphones. Added a Cisco 6901 SCCP phone as following: Installed SCCP module with: apt-get update apt-get install chan-sccp-ast16 Set pbx ip address as t*f*t*p server...

I have a SIP Trunk configured and is registered in FreePBX. The SIP is registered and incoming calls working properly with incoming routes to an extension whereas the outbound calls are failing with All Circuits are busy now, please try your call later; prompt. Then the asterisk -r screen shows...

Staying at home during the past few months has given me some time to work on some new ideas for Simon Telephonics. I wanted to share the first here in items/services for sale in case anyone is interested. Targeted especially to admins who are already invested in certain cloud platforms, we have...

I've been having an issue with getting TCP working over my PjSip extensions what happens is when i connect my Endpoint. The Endpoint goes Reachable but than not even maybe 4 seconds it goes Unreachable. Ive troubleshooted in many ways such as. I've tried to take the sonicwall out of my network...

Hello again, I just compared the "Lean" and "Enchilada" FreePBX instances in Webmin and it looks like the IP addresses for all the SIP Trunk providers are missing in the Enchilada version. The trunks do show in FreePBX but no IP addresses in Linux Firewall rules in Webmin. They rules are...

For those awaiting Incredible PBX support for the new January build of Issabel 4 with Asterisk 13, we've got a weekend project for you. 1. Begin by downloading and installing the January 2018 release of Issabel 4 with Asterisk 13. 2. Issue the following commands to install Incredible PBX 13...

We are pleased to introduce Incredible PBX 13-13 for VMware servers including the free ESXi platform. Using the IncrediblePBX-13.13.ova image, you can build Incredible PBX 13-13-LEAN from the latest Asterisk 13 source in about 15 minutes. Or you can use the IncrediblePBX-13.13.18.4.ova image...

Is it possible to migrate from FreePBX 14 to IncrediblePBX?

Just testing the waters as to whether there would be any interest in a commercial (true) multi-tenant module for Incredible PBX 13? Installation would be included. If you're interested, please fill out the survey below:

Hello, I had numerous installs on CentOS 6 with Incredible PBX 13 and most of them were trouble free up untill recently. For some reason even with clean installs I have lots of problems with it right after it finishes installing. I'll list some here: PBX breaks after few months with recording...